Zbotic

Chinchwad, Pune, Maharashtra

• MOQ 1 Piece(s)

Microcontroller ATmega328 (SMD) – Interface CH340G Operating Voltage: 5V Input Voltage (recommended): 7-12V Input Voltage (limits): 5-20V Digital I / O Pins 14 (of which 6 provide PWM output) Analog Input Pins: 6 The Arduino Uno R3 is a micro-controller board base on the ATmega328 . It has 14 digital input/output pins (of which 6 can be used as PWM outputs); 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything need to support the micro-controller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get start.

• MOQ 1 Piece(s)
• Number Of FlowerPower Supply Module

breadboard power supply module, compatible with 5v, 3.3v. apply to mb102 breadboard input voltage: 6.5-12 v (dc) or usb power supply output voltage: 3.3v/5v can switch over maximum output current:

• MOQ 1 Box
• Number Of FlowerHeat Shrink Tube

Made of high quality material, corrosion-resistant, wear-resistant and durable. Supplied internal diameter: 1.5mm, 2mm, 3mm, 4mm, 5mm, 6mm, 8mm, 10mm. Big collection of heat shrink tubing, 8 specifications, 5 colors. With a transparent box packaging, easy to store and use.

• MOQ 1 Piece(s)
• ApplicationPulse Oximeter

heart rate click carries maximas max30100 integrated pulse oximetry and a heart-rate sensor. it’s an optical sensor that derives its readings from emitting two wavelengths of light from two leds – a red and an infrared one – then measuring the absorbance of pulsing blood through a photodetector. this particular led colour combination is optimized for reading the data through the tip of one’s finger.the signal is processed by a low-noise analog signal processing unit and communicated to the target mcu through the mikrobus i2c interface. developers of end-user applications should note that the readings can be negatively impacted by excess motion and changes in temperature. also, too much pressure can constrict capillary blood flow and therefore diminish the reliability of the data. a programmable int pin is also available. the operates at the 3.3v power supply.main applications: medical monitoring devices fitness assistant devices wearable devices

• MOQ 10 Piece(s)
• Brand NameZbotic
• Number Of FlowerInfrared Sensor
• Detection distance: 2 ~ 30cmComparator chip: LM393

• MOQ 1 Piece
• ConditionNew
• Number Of FlowerAutomatic
• Input Voltage (recommended): 7-12VInput Voltage (limits): 5-20V
• Microcontroller ATmega328 (SMD) – Interface CH340GDigital I / O Pins 14 (of which 6 provide PWM output)
• ArchitectureAVR
• Country of OriginIndia

• MOQ 1 Piece(s)

14 digital input/output pins, 6 analogue inputs, 16 MHz crystal oscillator, USB connection, power jack, ICSP header The Arduino Uno R3 is a micro-controller board base on the ATmega328 . It has 14 digital input/output pins (of which 6 can be used as PWM outputs); 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything need to support the micro-controller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get start.

• MOQ 1 Piece(s)
• Responsivity 124 V/w Blackbody=500K,1Hz@25℃NEP 0.27 nW/Hz1/2 Blackbody=500K,1Hz@25℃
• Specific detectivity 1.0E+08 cmHz1/2/wTemp. coefficient of resistance 0.1 %/℃ Temp=25℃～ 75℃
• Distance Range 5-15cmThermopile resistance 95 120 140 KΩ Temp=25℃

• MOQ 1 Piece(s)
• Number Of FlowerHumidity Sensors

Input Supply voltage (VDC): 3.3 ~ 5 Supply Current (mA): measurement 0.3mA standby 60?A. Temperature measurement range: 0~50 degrees Temperature measurement error: ±2 degrees Humidity measurement range: 20%~95%RH Humidity measurement error: ±5%RH