We are one of the prominent manufacturers and suppliers of Precision Drilling Cum Milling Machine in India. The Precision Drilling Cum Milling Machine that we supply is highly efficient in its performance and is extensively used for drilling and milling applications.

Outstanding features of the Speedcut MTU-55 machines are the following clear, self explaining arrangement of all component parts, convenient location of worktable and copyholder permitting workpiece. All controls grouped within easy reach of the operator. These features add up to great convenience in operation. The fixed arrangement of the pantograph support has been compensated for by the provision of three dimensional worktable movement.The massive box-section column cast integral with the amply dimensioned base plate has horizontal guide ways for a vertically adjustable knee which in turn carries the worktable. The crosswise adjustment of the worktable in combination with horizontal and vertical knee adjustment enable any desired table position to beobtained. Clamping area and work capacity of the worktable can be increased by attaching an auxilliary table. The master table or copyholder mounted on a longitudinally another adjustable knee can also be raised or lowered to suit special operating conditions. After the clamping bolts have been loosened the copy holder can be swivelled through 360° The design of the Speed Cut Model MTU-55 Pantograph Engraving and profiting Millors is based on the use of a Three Dimensional pantograph. This principle made it possible to develop and introduce the first manually control copy-milling machines using tracer stylus which by tracing a template or master guies a milling in such a manner that accsurate reproductions are obtained. The pantograph mechanism which has been designed for fingertip control assures absolute accuracy of reproduction and an excellent surface finish requiring little, if any, retouching and thus reducing costs to a minimum. The Model MTU-55 Miller which is equiped with a larger pantograph and a more generously dimensioned Cutter Spindle essembly is of particular advantage in the manufacture of moulds and dies of all kinds weighing upto 200 Kg. in view of the higher metal cutting capacity of the MTU-55 miller. This machine has been provided with a positively controlled tracer pin guiding mechanism for the rough milling of the heavier classes of work.

SPEED CUT-M99 Universal Letter Engraving Machine is built around a pantograph mechanism which permits the reproduction of two dimensional designs. In this machine a tracing stylus which is guided alo g a template or master controls a single-lip cutter , which serves to reproduce the master on a reduced or a t-to-t scale. In the precision mechanical industries as well as in numerous other industries, this model has proved its usefulness, economy and matchless versatility in the field of letter engraving and other light milling work on preci ion mechanical parts.They are equally suitable for job work and for batch and mass production. The fact that Speed Cut Engraving Machine is the preferred choice in many industrial fields both at home and abroad testifies to the quality of its work and to its wide range of usefulness. it is also possible to have engraving machine operated, after a relatively short instruction period, by female personnel, maximum economy in this case being ensured by time studies, by breaking jobs down into separate operations and by the use of properly designed jigs and fixtures. In shops specializing in engraving work, the Speed Cut Engraving Machine have proved indispensable tools for the production of letterings, templates for letter engraving work, stamps, punches and the like. This Engraving Machine has been especially designed for engraving and lettering work on plane, crowned or circular work pieces such as are encountered in the production of jewellry, watches, toys, medals and control panels etc. This Model has a still wider field of applications due to the greater area covered by its pantograph, it can be used for engraving, lettering and milling work on large size plates, signs and similar bulky work-pieces. Construction : This machine is designed for letter and line engraving and light milling work as encountered in various industries and trades. In many fields replication work can be easily carried out by female help. The light weight design of the Pantograph with play-free ball bearing joints for accurate work and easy tracing within the two dimensional working range. The antograph ratio can be set between 1:1 and the smallest 1:50. The high speed cutter spindle running is adjustable ball bearing. Standard Equipment : Set of spanners One spring collets Four clamps for copy holder table Two clamps for work table One tracer pin Features : Tool grinding attachment Swivel Vice Fixed Vice Rotary Table Copy setA to Z and Oto 9 Electric etching attachment Roll engraving attachment   » Technical Data   Spindle Spindle speed range 1800 to 15000 R. P.M. Spindle fine adjustment (3MM) Spindle coarse adjustment (6.25 MM) Spindle collet tapper 10 o Pantograph Pantograph arm largest 1 : 1 smallest 1 : 50 Work Table Longitudinal Travel (300 MM) Main slide cross travel (150 MM) Work table clamping area (300 x150 MM) Work table up and down (250 MM) Copy Holder Table Copy holder table clamping area : (450x250 MM) Max.Height between copy holder and pantograph arm : (20 MM) Weight : 350 K.G. approximately

Features : The Single machine can perform milling drilling and boring operations with precision and speed. Can be operated vertically at any angle at any point on the table surface easily. The machine can be converted to a horizontal milling machine with use of right angle attachment. Heavy milling with geared reduction can utilise the full overload capacity of the motor. Available with a range of accessories Standard Equipment Electrical equipment complete with wiring suitable for standard 415 V. 50 cycles 3 phase - AC supply-draw bolt-set of service tools   » Specifications   Table Length x Width 1080 x 240 mm Width of slots 16 mm No. of Slots 3 Centre distance 65 mm Max. weight admitted on table 250 Kg Traverse (Manual) Longitudinal 650 mm Cross 300 mm Vertical 400 mm Ram 300 mm Milling Head Spindle bore (without face mounting facility) H30 (ISO 30 on request) QUill traverse 127 mm QUill traverse 3 No. of power quill feeds mm Rev 0.05, 0.08, 0.15 Feed rates 12 x 1.5 mm Draw bolt 1.5 K.W. Motor Power 45 o either side SWivel Milling Head 45 o towards coloum 45 o away from coloum Ram 360 o No. of speed 8 Speed Range With Motor 1440 RPM Speed Range 80 to 1450 Space Required Length x Width x Height including 2300 x 1700 x 2200 mm Shipping Dimensions Length x Width x Height 1750 x 1700 x 2000mm Weight (Net / Gross (Approx.) 1150 / 1155 Kg Illustrations and specifications are not binding in detail and are subject to modification without notice.

We are one of the prominent manufacturers and suppliers of Precision Drilling Cum Milling Machine in India. The Precision Drilling Cum Milling Machine that we supply is highly efficient in its performance and is extensively used for drilling and milling applications.

Outstanding features of the Speedcut MTU-55 machines are the following clear, self explaining arrangement of all component parts, convenient location of worktable and copyholder permitting workpiece. All controls grouped within easy reach of the operator. These features add up to great convenience in operation. The fixed arrangement of the pantograph support has been compensated for by the provision of three dimensional worktable movement.The massive box-section column cast integral with the amply dimensioned base plate has horizontal guide ways for a vertically adjustable knee which in turn carries the worktable. The crosswise adjustment of the worktable in combination with horizontal and vertical knee adjustment enable any desired table position to beobtained. Clamping area and work capacity of the worktable can be increased by attaching an auxilliary table. The master table or copyholder mounted on a longitudinally another adjustable knee can also be raised or lowered to suit special operating conditions. After the clamping bolts have been loosened the copy holder can be swivelled through 360° The design of the Speed Cut Model MTU-55 Pantograph Engraving and profiting Millors is based on the use of a Three Dimensional pantograph. This principle made it possible to develop and introduce the first manually control copy-milling machines using tracer stylus which by tracing a template or master guies a milling in such a manner that accsurate reproductions are obtained. The pantograph mechanism which has been designed for fingertip control assures absolute accuracy of reproduction and an excellent surface finish requiring little, if any, retouching and thus reducing costs to a minimum. The Model MTU-55 Miller which is equiped with a larger pantograph and a more generously dimensioned Cutter Spindle essembly is of particular advantage in the manufacture of moulds and dies of all kinds weighing upto 200 Kg. in view of the higher metal cutting capacity of the MTU-55 miller. This machine has been provided with a positively controlled tracer pin guiding mechanism for the rough milling of the heavier classes of work.

SPEED CUT-M99 Universal Letter Engraving Machine is built around a pantograph mechanism which permits the reproduction of two dimensional designs. In this machine a tracing stylus which is guided alo g a template or master controls a single-lip cutter , which serves to reproduce the master on a reduced or a t-to-t scale. In the precision mechanical industries as well as in numerous other industries, this model has proved its usefulness, economy and matchless versatility in the field of letter engraving and other light milling work on preci ion mechanical parts.They are equally suitable for job work and for batch and mass production. The fact that Speed Cut Engraving Machine is the preferred choice in many industrial fields both at home and abroad testifies to the quality of its work and to its wide range of usefulness. it is also possible to have engraving machine operated, after a relatively short instruction period, by female personnel, maximum economy in this case being ensured by time studies, by breaking jobs down into separate operations and by the use of properly designed jigs and fixtures. In shops specializing in engraving work, the Speed Cut Engraving Machine have proved indispensable tools for the production of letterings, templates for letter engraving work, stamps, punches and the like. This Engraving Machine has been especially designed for engraving and lettering work on plane, crowned or circular work pieces such as are encountered in the production of jewellry, watches, toys, medals and control panels etc. This Model has a still wider field of applications due to the greater area covered by its pantograph, it can be used for engraving, lettering and milling work on large size plates, signs and similar bulky work-pieces. Construction : This machine is designed for letter and line engraving and light milling work as encountered in various industries and trades. In many fields replication work can be easily carried out by female help. The light weight design of the Pantograph with play-free ball bearing joints for accurate work and easy tracing within the two dimensional working range. The antograph ratio can be set between 1:1 and the smallest 1:50. The high speed cutter spindle running is adjustable ball bearing. Standard Equipment : Set of spanners One spring collets Four clamps for copy holder table Two clamps for work table One tracer pin Features : Tool grinding attachment Swivel Vice Fixed Vice Rotary Table Copy setA to Z and Oto 9 Electric etching attachment Roll engraving attachment   » Technical Data   Spindle Spindle speed range 1800 to 15000 R. P.M. Spindle fine adjustment (3MM) Spindle coarse adjustment (6.25 MM) Spindle collet tapper 10 o Pantograph Pantograph arm largest 1 : 1 smallest 1 : 50 Work Table Longitudinal Travel (300 MM) Main slide cross travel (150 MM) Work table clamping area (300 x150 MM) Work table up and down (250 MM) Copy Holder Table Copy holder table clamping area : (450x250 MM) Max.Height between copy holder and pantograph arm : (20 MM) Weight : 350 K.G. approximately

Features : The Single machine can perform milling drilling and boring operations with precision and speed. Can be operated vertically at any angle at any point on the table surface easily. The machine can be converted to a horizontal milling machine with use of right angle attachment. Heavy milling with geared reduction can utilise the full overload capacity of the motor. Available with a range of accessories Standard Equipment Electrical equipment complete with wiring suitable for standard 415 V. 50 cycles 3 phase - AC supply-draw bolt-set of service tools   » Specifications   Table Length x Width 1080 x 240 mm Width of slots 16 mm No. of Slots 3 Centre distance 65 mm Max. weight admitted on table 250 Kg Traverse (Manual) Longitudinal 650 mm Cross 300 mm Vertical 400 mm Ram 300 mm Milling Head Spindle bore (without face mounting facility) H30 (ISO 30 on request) QUill traverse 127 mm QUill traverse 3 No. of power quill feeds mm Rev 0.05, 0.08, 0.15 Feed rates 12 x 1.5 mm Draw bolt 1.5 K.W. Motor Power 45 o either side SWivel Milling Head 45 o towards coloum 45 o away from coloum Ram 360 o No. of speed 8 Speed Range With Motor 1440 RPM Speed Range 80 to 1450 Space Required Length x Width x Height including 2300 x 1700 x 2200 mm Shipping Dimensions Length x Width x Height 1750 x 1700 x 2000mm Weight (Net / Gross (Approx.) 1150 / 1155 Kg Illustrations and specifications are not binding in detail and are subject to modification without notice.