Process Control Devices Hooghly, West Bengal

• MOQ 2 Set
• Country of OriginIndia
• Size1/4
• TypeRotameters, Aluminium
• MaterialALUMINIUM / ACRYLIC
• ShapeRectangular, TAPER TUBE
• ApplicationIndustrial
• ColorTransparent
• FeatureEasy To Maintain
• ConditionNew
• FinishingPolished
• Output1500 LPM

Oil Flow Indicating Regulating Rotameter unit suitable for Two/Four outlets consists of Aluminum body, 2/4 nos. moulded Taper Perspex tube, 2 nos. inlets ½ʺ BSP, 2/4 nos. Outlets ¼ʺ BSP, with flow indicating Float, 5 Kg/cm 2 max. working pressure, 1 500 cc/min. flow for each output, to be vertically mounted

• MOQ 1 Set
• Country of OriginIndia
• TypeCentralised Lubrication Systems
• CertificationISI
• ApplicationRotameters
• Weight1000-1500kg, 1500-2000kg
• Voltage440V
• ConditionNew
• Rated Power3 KW
• Driven TypeElectric
• Warranty1year
• Automation GradeFully Automatic
• Brand NamePCD

Hydraulic Power Pack  which consists of an 1200 Litre Oil Tank, size 1500 mm (length) X 1000 mm (width) 800 mm (height) made of 5mm thick MS plate and whose 90% approximate oil filling capacity is 1080 Litres complete with 1½ʺ N. B. Feed and 2” N.B. Drain  will be installed on the Paper Machine ground floor. MCC for total Electrical Control Including alarm Annunciation for i.Low Oil Pressure, ii. Low Oil Level, iii. Filter Blocked, iv. High Oil Temperature is housed in a wall mounting type sheet metal box complete with hinged open-able door complete with Audio Visual Alarm Annunciation and all electrical controlling switches, knobs, pushbuttons and indicating lamps duly wired with in & out terminals

• MOQ 1 Set
• Country of OriginIndia
• TypeHEAVY DUTY
• CertificationISI
• ApplicationHydraulic Cylinder
• Weight1000-2000kg
• ColorSiemens Grey
• Voltage440V
• ConditionNew
• Automatic GradeFully Automatic
• Power10 KW
• Drive TypeHydraulic
• Warranty1 Year
• Brand NamePCD
• After-Sales Service ProvidedYES
• Max Height2m
• Min Height1m

Press Hydraulic Power Pack : will be installed on the ground floor of the Paper Machine and will consist Oil Tank which is of 1500 mm length X 1000 mm width X 500 mm height made of 5mm thick MS plate and whose 75% approximate oil filling capacity is 550 liters.Hydraulic pressure will be provided by dual 50 LPM Gear Pumps driven by two 10 H.P. motors, one of the set will be in operation and another will remain as standby. The output of the Pumps will be connected to a Manifold which will have 2 (two) nos. Check Valves, 1(one) no. Pressure Relief Valve and 1(one) no. Pressure switch mounted on it. The output of the manifold will be distributed to all 4- 5 manifolds for Unload, Touch, Load and Hold whenever required. The individual hydraulic pressure will be developed by individual Pneumatically Actuated Pressure Reducing Valve of Air to Oil ratio 1:25, for each Front & Back Hydraulic Loading.

• MOQ 1 Set
• Country of OriginIndia
• TypePressure Controllers
• MaterialCAST STEEL
• ApplicationLiquid Pressure
• ColorWhite, Grey
• ConditionNew
• PowerNot Applicable
• Warranty1year
• Pressure Range6 kg/ sq. cm2
• Alarm RangeNone
• Brand NameKusters
• Power SupplyHydraulic Pressure
• AccuracyO.1%
• Output0.2 - 6.0 kg/ sq. cm2
• Range0.2 - 6.0 kg/ sq. cm2

Differential Oil Pressure Controller :This unit is complete in all respect, which will be fitted directly on the front side shaft end of the Swimming Roll, for controlling the Differential Oil Pressure between the Pressure Chamber and the Return Oil Chamber, the air to oil ratio is 1: 1.56 , the gauge port connections are  1/2 ʺ BSP for positive & 3/8” BSP for negative, the controlling air connection is 1/4ʺ BSP.