3MXWATERTECHNOLOGY

Jasola, Delhi

Agitators are designed for heavy-duty applications that require high mixing rates in tanks up to 5000 mm diameter. Typical applications for these versatile Mixers / Agitators are found in petrochemical, water, phosphate and plastics industries.ETP, STP, Chemical Preparation etc, . Its heavy-duty, cast iron/steel housing is designed to maintain accurate gear alignment and to with stand the high stress associated with many severe mixing applications. The series incorporates spherical/roller shaft bearings to isolate impeller loading that can cause gear damage, and tapered/roller shaft bearings to isolate impeller loading that can cause gear damage, and tapered roller bearings for high-thrust loads.

In applications where precise measurements are important, refillable pH and ORP probes deliver high accuracy and long lifetimes.

Introducing FRP Vessels, crafted from Fiberglass Reinforced Plastic (FRP) for durability. Available in various colors depending on the manufacturer. Ideal for water storage and treatment applications. These FRP Vessels come in different sizes with packaging tailored to each manufacturer's specifications.

A multiport valve consists of a valve body machined from a solid block material with a minimum of three tube ends. Multiport valves can be produced with up to 20 actuators and 40 tube ends or even more depending on the manufac- turing feasibilit.

An air diffuser or membrane diffuser is an aeration device typically in the shape of a disc, tube or plate, which is used to transfer air and with that oxygen into sewage or industrial wastewater. Oxygen is required by microorganisms/bacteria residents in the water to break down the pollutants. Diffusers use either rubber membranes or ceramic elements typically and produce either fine or coarse bubbles. Disc Diffuser :- EPDM membrane-80mm & 150mm We are engaged in offering a wide range of Coarse Bubble Diffusers to the clients spread across the domestic market. These diffusers have finely divided air bubbles, which ensure freedom form common clogging problems. The piece plastic diffuser base and neoprene disc fitted in these diffusers assures hassle free operations with minimal corrosion problems.

The Disc Filters belong to the side feed group and have been around for many years. They are generally used in heavy duty applications such as the dewatering of iron ore taconite, hematite, coal, aluminum hydrate, copper concentrate, pyrite flotation concentrates and other beneficiation processes. The high time for Disc Filters was in the 60 's when the metallurgical industries were booming and filters with 300 m2 and larger were manufactured. The filter consists of several discs, up to 15 in the larger machines, each made up from sectors which are clamped together to form the disc. The sectors are ribbed towards the neck and designed for a high capacity drainage rate. One of the main features is that the required floor space taken up by disc filters is minimal and the cost per m2 of filtration area is the lowest when compared to other vacuum filters.

3MX Water Technology is market leader in the sphere of manufacturing & supplying Filter Press & PP Recessed Filter Plates. Filter Press is a device which is used to separate solid and liquid. Filter Press frame is made from M.S Fabrication ( I.S 2062 Grade ) or cast iron and PP Recessed Filter Plates made from Pure Polypropylene Virgin material in natural colour. Our range of Filter Press comes with Fully Automatic , Hydraulic and Manual opening and closing arrangements. Company has also developed different designs of Filter Plates to meet the industrial needs in terms of competitive price and quality

s the name suggests the Micron Cartridge Filters are filters which filter the water to designated Micron rating. This is achieved by specially designed cartridge elements to be housed inside the Filter vessel. s the name suggests the Micron Cartridge Filters are filters which filter the water to designated Micron rating. This is achieved by specially designed cartridge elements to be housed inside the Filter vessel.

A magnetic flow meter is a transducer that measures fluid flow by the voltage induced across the liquid by its flow through a magnetic field. A magnetic field is applied to the metering tube, which results in a potential difference proportional to the flow velocity perpendicular to the flux lines.

Membrane housing is a pressure vessel for loading membrane elements in a reverse osmosis water treatment system. Currently, there are three types of membrane housings with different materials for water treatment on the market: FRP (fiberglass reinforce plastic), stainless steel and PVC. However, in recent years, more and more reverse osmosis water treatment systems have chosen to use FRP membrane housing. This is because the FRP membrane housing has a strong advantage in terms of pressure bearing capacity, design size, material properties and operating temperature compared to stainless steel and PVC membrane shells. 1. 100% quality assurance test with 1.1 times of working pressure maintained for at least five minutes, we could guarantee the safety and no leakage. Not sampling test. 2. Quality Assurance 3. Burst test with 6 times of its design pressure; 4. 100000 times cycle test. 5. Warranty 6. Two years warranty for housing body against industry defects. 7. One year warranty for spare parts.

Roots blower application occurs in numerous industries and industrial processes including pneumatic conveying. Roots blowers play a vital role in many manufacturing and processing systems. Roots blowers are technically referred to as 'positive displacement rotary air blowers ' and are commonly known as 'blowers. '

Activated carbon is one of the most effective media for removing a wide range of contaminants from industrial and municipal waste waters, landfill leachate and contaminated groundwater. As the worlds most powerful adsorbent, it can cope with a wide range of contaminants. Different contaminants may be present in the same discharge and carbon may be used to treat the total flow, or it may be better utilised to remove specific contaminants as part of a multistage approach. As with potable water, Activated Carbon has a dedicated reactivation facility that handles industrial grades of spent carbon. If required, the spent carbon can be returned and kept segregated custom reactivation or the carbon can be taken from, and returned to, an industrial pool of carbon.

Our customers can avail from us an excellent quality range of Metering Dosing Pump. These E-Dose Pumps are available in various sizes and specifications. Our Pumps can be customized as per our customers specifications.

While many of us have heard of ion exchange (IX) resins, few of us have a grasp on how the technology actually works. Whether youre weighing potential treatment strategies, looking for ways to get the most out of your existing IX resins, or simply curious about IX chemistry, you may be asking What is ion exchange resin and how does it work? No matter your goals, this article will help you to make better decisions on the right water treatment strategies for your facility by helping you to better understand IX resin technology, and how it serves a variety of water treatment and separation needs

Membrane bioreactor (MBR) is generally a term used to define wastewater treatment processes where a perm-selective membrane, eg microfiltration or ultrafiltration, is integrated with a biological process specifically a suspended growth bioreactor. MBRs differ from polishing processes where the membrane is employed as a discrete tertiary treatment step with no return of the active biomass to the biological process. Almost all commercial MBR processes available today use the membrane as a filter, rejecting the solid materials which are developed by the biological process, resulting in a clarified and disinfected product effluent.