Other Products / Services #3922719

Thermoplastic Road Marking Paint is the best marking system and is premixed with glass beads evidently visible and reflective throughout day and night. The paint is offered in both yellow and white colors with exceptional shine and whiteness. Our paint is examined and approved by quality auditors and are made available as per the requirements of our clients and can be offered at industry leading prices. Further, this paint is environmentally friendlier with no carcinogenic solvents used.

Features

• Color stability
• Superior weathering resistance
• Long lasting retro reflectivity
• Excellent wear resistance

Frigmaires are skilled professionals with a long and successful experience in the field of manufacturing and exporting wall putty plants.We have till date supplied and installed many wall putty plants in India. Frigmaires is a market leader in India's Wall Putty Industry, being one of the largest manufacturer, supplier and exporter. We are an ISO 9001:2008 certified company. Our wall putty plants meet the highest international standards as well as matching the Indian conditions.We supply wall putty plants designed for manufacturing a wide range of pre mixed mortars suitable for repairing, water Proofing, tile fixing, plasters and grouts.

Transformer Oil or Dielectric Insulation Oil and other oils required for electrical machinery and installations can be manufactured using hydro finished base oils of group II +. The base stocks are selected based on viscosity requirements of the user. In colder countries pour point is also a critical property for base oil selection. Transformer Oil (TO) be used for filling the transformer with a primary objective of providing electrical insulation between the primary and secondary coils. Dissipation of heat generated during the process is also an important function. Electrical insulation is favored by high viscosity and heat dissipation is favored by low viscosity and circulation of fluid. Base oil viscosity at a compromise level is selected. Viscosity ranges for base oil slightly defer country to country, generally in the range of 10 to 40 cst. at 400 Degree C. During the service temperature of oil rises to about 60-800 Degree C. Viscosity of oil decreases due to temperature rise. Transformer has large extended surfaces exposed to atmosphere. The oil circulates through these tubes and dissipates heat into the atmosphere.

Transformer Oil or Dielectric Insulation Oil and other oils required for electrical machinery and installations can be manufactured using hydro finished base oils of group II +. The base stocks are selected based on viscosity requirements of the user. In colder countries pour point is also a critical property for base oil selection.

Transformer Oil (TO) be used for filling the transformer with a primary objective of providing electrical insulation between the primary and secondary coils. Dissipation of heat generated during the process is also an important function. Electrical insulation is favored by high viscosity and heat dissipation is favored by low viscosity and circulation of fluid. Base oil viscosity at a compromise level is selected. Viscosity ranges for base oil slightly defer country to country, generally in the range of 10 to 40 cst. at 400 Degree C. During the service temperature of oil rises to about 60-800 Degree C. Viscosity of oil decreases due to temperature rise. Transformer has large extended surfaces exposed to atmosphere. The oil circulates through these tubes and dissipates heat into the atmosphere.

Transformer Oils are very sensitive to contamination by water or dirt and fibers as there are serious loss electrical properties. Dust particles and textile fibers absorb moisture and orient in an alignment or bridge to connected high voltage and low voltage side resulting into Arcing and dielectric breakdown. While major breakdown are rare and lead to ultimate failure of machine, formation of small local arcs are common. It does not cause immediate damage to machine but damages the oil. These small arcs expose the oil to a very high corona temperature for split second, resulting into thermal breakdown of oil constituents. Some of these are gaseous and accumulate in the vapor space within the machine; others polymerize and settle down forming sludge. Over a period of time excess accumulation of gases and sludge may lead to serious dislocation of operation or even explosion. Thermal breakdown and oxidative degradation of oil could be reduced by incorporation of appropriate low temperature oxidation inhibitors and additives. Some users insist upon uninhibited products in some cases oxidation inhibitors are to be blended. Manufacture of TOs therefore has following process steps.

A typical blending plant comprsies of the following sections :

• Tank farm
• Blending area
• Storage, Filling And Packing

Base oils from the tank farm are pumped into the blending vessels and mixed with additives at the required temprreature to obtain a homgeous mix.there are several methods to achieve and optimum blend depending on the product and plant requirments. The blended product is then filtered and transferred to storage tanks from where it is taken to the filling station and packed in containers or barreles.the entire process can be carried out in a basic manually operated plant or auotmated plc controled plants

The lube oils are manufactured to api or other required specifications

LUBE OIL BLENDING PLANT

FRIGMAIRES OFFERS COMPLETE PLANTS ON A TURN KEY BASIS FOR THE PRODUCTION OF A WIDE RANGE OF LUBRICANTS.THE SERVICES OFFERED BY US INCLUDES PLANT DESIGN.DETAILED ENGINEERING SERVICES, TANK FARM DESIGN, EQUIPMENT MANUFACTURE AND SUPPLY, ERRECTION AND COMMISIONING.LAB SET UP.TRAINING .FORMULATIONS.RAW MATERIAL SOURCING AND SUPPLY.
PLANTS ARE TAILOR MADE TO MEET THE PROJECT COST AND LOCAL MARKET CONDITIONS.

TPYES OF LUBRICANTS
AUTOMOTIVE LUBRICANTS
INDUSTRIAL LUBRICANTS
MARINE LUBRICANTS
SYNTHETHIC LUBRICANTS

PLANT LIST
BLENDERS(ABB.ILB.SMB)

PIGGING UNITS

DRUM DECANTERS

FILLING LINES

FILTERS

THERMIC FLUID HEATRES

COOLERS/HEAT EXCHANGERS

TESTING EQUIPMENTS

AUTOMATION AND SCADA

PIPING AND INSTRUMENTATION

LABORATORY PLANTS

SKIDS AND PLATFORM MOUNTED PLANTS

Water Based Paints (Emulsions) are environmentally friendly products, based on high quality copolymer and acrylic emulsion. Contain pigments, extenders, anti-fungal and antibacterial additives. Low VOC products.
Product Range:Plastic Emulsion Acryl Emulsion I Nice Emulsion Matt Emulsion Aery! Emulsion II Eggshell Emulsion Matt/Silky Weather Resist Matt/Silky Acry l ic Super Emulsion Super matt Emulsion Gloss Emulsion Shield Topcoat Silk/Gloss Protect Seal Sil icone Emulsion (matt/silk) Insect Resist (matt/silk) Defendem Acryl ic Eggshell Emulsion Gold National Matt Emu lsion (with Teflon surface protector) National Eggshell Emu lsion Silk (with Teflon surface protector) National Gloss Emulsion (with Teflon surface protector).
Characteristics:

• Water, weather and alkali resistant (for exterior application)
• Contains antifungal and antibacterial additives
• Gives smooth finish (Glossy, Silky, Matt)
• Easy to apply and fast drying
• High coverage quality
• Better stain resistance
• Easy to clean
• Low VOC
• highly washable

Recommended Use:
Recommended for interior and exterior purposes (depending on the product) and can be used on concrete, plaster, gypsum and wooden surfaces. (Refer to technical data sheets for specification).
Theoretical Spreading Rate:
7.5-10.5 m2 I liter depending on application method, nature of surface, film thickness etc.
Application Method and Thinning:
Roller, brush or spray. For thinning add I 0-15 % water if neces sary.
Drying Time:
Touch dry: 30 minutes to I hour.
Colors:
Specific colors other than our standard shades can be created through National Computerized Colors Tinting System that offers a wide selection of shades (other than National Plastic Emulsion and National Acryl Emulsion I

Used mainly by the paint, ink & coating industries for size reduction and dispersing of pigments in liquids. Particle size reduction upto 2 microns is possible in a single pass. The material to be processed is pumped from the bottom of the mill into the milling chamber which is filled with grinding media of 3mm dia. The media is agitated by a shaft fitted with a number of impeller discs along its length. As the material moves upwards it is subjected to high hydraulic & shearing forces between the grinding media which results in fine grinding of the material. This material then passes through the screen which separates the media from the process material. All mills are povided with a jacket arrangement for cooling the material in the grinding chamber.

Vibro Shifter Is a highly efficient modular designed machine which imparts three directional vibrations on the screens. It is designed for all types of screening applications. The unit is run by a unbalanced vibrating motor with shafts at both ends. The machine is available in a number of decks and mesh sizes depending on the application. Output can be varied by simple adjustment of unbalanced weights on motor shafts. Units with dust covers are available to prevent dusting. All parts are easily removable and replaceable for manufacture.

Grease is a fine dispersion of an oil-insoluble thickening agent - usually soap in a fluid lubricant which is generally mineral lubricating oil. The soap is made up of fatty acid, tallow or vegetable oil saponified with alkali which can be hydrated lime, caustic soda, lithium hydroxide or aluminum hydroxide. The lubricating oil component is refined base oil-naphthenic, of medium viscosity index, or cylinder oil stock.Structurally grease is a water-in-oil emulsion. Its appearance is smooth, mostly translucent, soft or hard.Properties essential for performance of grease are structural stability, lubricating quality, low and high temperature performance (which are provided by the selected lube oil base stock), where as properties such as water resistance, high temperature quality, resistance to break down through continuous use and ability of grease to stay in place are provided by the soap.Additives eg. Graphite, modified clay, asphalt, oxidation and corrosion inhibitors, extreme pressure additives melybdenum disulphide etc. are used to impart specific properties as required by end application.

Conical Blender Used for smooth and gentle blending of dense powders and abrasive material. This machine can handle large volumes and is easily cleaned. Separately driven internal lump breakers can be provided for braking of lumps and agglomerates. The unit consists of two cylindrical cones welded together and fitted with shaft mounted on bearings. The blender is rotated at slow RPM because of which the entire mass is tumbled along the angle of the cone resulting in cris crossing of the material to produce a uniform mix. Baffles are provided inside the cone for throughout mixing

Single Source responsibility for complete plant design right from Civil-Mechanical-Electrical to Chemical process. Client's scope of work limited to bare minimum. Know how and training based on years of manufacturing experience. Modern Laboratory set up to meet international specifications. Plant design complies with international standards and safety features. Automotive brake fluid has many responsibilities. Corrosion protection and lubrication of brake system components are only a portion of the role brake fluid must play. All automobiles that have a hydraulic braking system must use brake fluid in order for the brake system to operate. The type of fluid used can depend on the type of vehicle and the demands of the vehicles brake system. The two most common brake fluids used in the automotive industry are fluids that contain Polyalkylene Glycol Ether and fluid that contains Silicone or Silicium-based Polymer. Both Fluids are common but very different in regards to the manner in which they perform. Fluids containing Polyalklene Glycol Ether are more widely used and are the only fluids that should be used in racing brake systems. Because brake systems may reach extreme temperatures brake fluid must have the ability to withstand these temperatures and not degrade rapidly.

Frigmaires Attritor is used for producing fine & homogenous dispersons quickly & repeatedly under controlled conditions. Used for the manufacture of ceramics , inks, paints, coatings, metal oxides, ferrites, chocolates, chemicals & pharmaceuticals. The Attritor is often referred to as a agitated ball mill. The material to be ground is charged into a vertical tank filled with grinding media. Both the material and grinding media are then agitated by a shaft with arms causing the media to exert shearing & impact forces on the material. This action produces an extremely fine material measured in microns. No pre mixing is required. All attritors are provided with cooling jackets. Recirculating facility is available as optional.

Wall plaster spraying machine is engineered by FRIGMAIRES in collaboration with BAUMANN, Germany. These are TuV, CE, GS and ISO 9001 certified and acclaimed for longer service life. These are engineered using best available techniques and following international industrial standard. These are admired for unique design, compact size and high functional efficiency.

Wall plaster spraying machine is engineered by FRIGMAIRES in collaboration with BAUMANN, Germany. These are TuV, CE, GS and ISO 9001 certified and acclaimed for longer service life. These are engineered using best available techniques and following international industrial standard. These are admired for unique design, compact size and high functional efficiency.FRIGMAIRES iM4 is a very compact, flexible and efficient mixing pump.Up to 4 mm diameter. Fully equipped with a reliable compressor and a high performance water pump.iM4 Buddy is the all-rounder amongst plastering machines, well known in many markets. With a 200

Our auto grease filling machine has tin lifting arrangement which is provided for efficient grease lifting purposes. This auto grease filling machine is electro pneumatically operated and made by using excellent grade stainless steel and mild steel. It is known for its low electricity consumption as it requires only 415 V of alternating current. Our auto grease filling machine is widely demanded in packaging lines of different industries for providing smooth packaging operation and high accuracy. Furthermore, it is also equipped with volumetric filler and transfer conveyor.

Specifications

• Packing range: 200 gm to 5 Kg.

Capacity

• 34-36 Cans / Min. for 200 gm
• 20-24 Cans / Min. for 1 Kg
• 12-14 Cans / Min. for 2 Kg
• 8-10 Cans / Min. for 3 Kg
• 4-6 Cans / Min. for 5 Kg
• Filling accuracy: 0.5% of HPS At S. O. P. and S. O. C.
• Operation: electro-pneumatic
• Electric supply: 415 V AC, 3 Phase
• Power consumption: 5.5 HP Approx
• Air supply: @ 6 kg/cm2
• Air Consumption: 120 LPM
• Man Power reqd: 2 Nos
• Space requirement: 6.1 Mtr. x 1.5 Mtr.

IN-Feed Conveyor:

• Construction: dodge type
• Track width: 250 mm
• Height: 800 mm
• Length: 1000 mm + 2100 mm (in-feed + filler
• Guide rails: Adjustable
• Drive: HP gear motor
• Operation: electrical, through V/F drive

Volumetric Filler:

• Filler: augur type volumetric type timer base [as per attached specs.]
• Range: 500 gm to 5 Kg
• Can lift auto infeed: pneumatic for cavity killing
• System: using infeed valve actuator assy. (40 mm) photo sensor operated

Transfer conveyor (for lid dispenser & presser):

• Construction: S.S. slat belt type
• Belt width: 190 mm
• Track width: 250 mm
• Height: 800 mm
• Length: 3000 mm
• Linear Speed: 14 mtrs per min
• Guide Rails: adjustable
• Drive: HP gear motor
• Operation: electric

Technical Specification (Filler Unit):

• Material: industrial grease - temperature: 70-80 degree centigrade
• Range: 0.5 to 5 kg., in tins / pails
• Hopper capacity: 35 Ltr. approx. made out of 16 swg., S.S. 304 sheet
• Product feed: automatic through actuated valve having auto level control
• Material flow: by rotating auger
• Flow control: digital programmable timer
• Fill setting: with key pad switches
• Fill accuracy: 0.5% of HPS at S.O.P. & S.O.C.
• Filling rate: 300 gms. / sec
• Augur control - by E / M clutch break unit
• Drive transfer: using V belt
• Augur drive motor: 1 H.P., 3 phase, 415 V A.C.
• Mixer / wiper drive: using additional gear motor cap. 0.5 HP with suitable starter
• Power supply: 415 V A.C., 3 phase 4 wire 230 V A.C., 1 phase 3 wire
• Compress air supply: @ 6 kg / cm
• Consumption: 40 LPM
• General construction: the machine fabricated out of M.S. angle, sheet etc, hopper and all other contact parts are made out of S.S. 304 and wiper strips of PTFE

Transformer Oil or Dielectric Insulation Oil and other oils required for electrical machinery and installations can be manufactured using hydro finished base oils of group II +. The base stocks are selected based on viscosity requirements of the user. In colder countries pour point is also a critical property for base oil selection. Transformer Oil (TO) be used for filling the transformer with a primary objective of providing electrical insulation between the primary and secondary coils. Dissipation of heat generated during the process is also an important function. Electrical insulation is favored by high viscosity and heat dissipation is favored by low viscosity and circulation of fluid. Base oil viscosity at a compromise level is selected. Viscosity ranges for base oil slightly defer country to country, generally in the range of 10 to 40 cst. at 400 Degree C. During the service temperature of oil rises to about 60-800 Degree C. Viscosity of oil decreases due to temperature rise. Transformer has large extended surfaces exposed to atmosphere. The oil circulates through these tubes and dissipates heat into the atmosphere.

These are usually more or less fibrous in structure texture depending mainly on the nature of the fatty material, high unsaturation yielding very fibrous greases. They have high dropping points usually not less than 150C and sometimes as high as 200C and are useful for relatively high temperature service. Owing to the solubility of the soap in water they are not water resistant.

Bail Out Press units are used for discharging of high viscosity materials which do not flow by gravity nor are punpable. After mixing of the materials the vessel is brought under the pressing lid and locked into the position. The pressing lid is activated and moved downwards by a hydraulic cylinder. The pressure of the lid on the surface of the material forces the material out from the bottom discharge valve. The discharge can be synchronised with the filling head of a packing machine.

Frigmaires Can Seaming machines is suitable for seaming cans ranging from 1 ltr Cap to 30 ltrs Cap. The machine is semi Automatic and can seam approx 150/200 Cans per hour.

Paint Filling machine suitable for filling of 30 Ltrsmin of Paint Distemper in Tins or Pouches. The machine is also suitable for filling 1 and 4 ltrs cans. The machine is complete with SS 304 contact parts & an electronic counter, one set of spare 'O' rings. The machine is provided with a S.S. 304, 40 liters capacity hopper for paint. The paint is to be fed pumped into the hopper after straining if necessary. The machine is driven 0.75 HP, 440 VAC, 3 Phase, and 50 Hz electric motor. The machine is provided with an electronic, two digits and digital preset counter for multi stroke filling. Thus the operator can preset the number of strokes to be filled on the counter enabling the machine to fill quantities upto 99 literskgs. Machine stroke can be set at say 1.0 kg per stroke and the counter at 05 strokes. Therefore the machine, once actuated, can fill 5.0 kgs & stop in each cycle.

Edge Runner used For mixing of foundry chemicals, pastes, moulding sand, foundry fluxes, food colours etc where an amount of binder or aggalomerate is to be blended into the material. Also used for densification of the mix. The pan is stationary inside which rotate heavy duty mullers rollers. The heavy wide rollers ride over the material where intensive crushing, shearing and mixing action takes place. Scrappers and ploughs are provided for directing the mass into the path of the rollers.The machine is also available with granite rolls and pan.

High Speed Emulsifiers suitable for Mixing, Dispersing, Homogenizing & Shearing of viscous liquid and pastes used in the Chemical, Pharmaceutical, Food, Paint & Ink Industry. The unit consists of a centrally located shaft coupled to a flanged type motor mounted on a steel housing. The shaft is provided with a Shear type cowless blade for quick & efficient processing of the material. Tie rods are provided for stability of the unit along with a mounting bracket to suspend the unit.

Note :A lifting and lowering stand can be provided at an extra cost.

OPTIONAL

• 1) Portable Stand.
• 2) Blades.
• 3) Variable Speeds.