Our Products
AANAL MAGNETIC FERRITE MAGNET are very hard, but more brittle and more prone to cracks and chipping on the edges and corners. They are characterized a very high normal and intensive coercive force, but rather a low residual induction and are virtually free form self-f-Demagnetization. They possess a very high electrical resistivity which makes them ideally suited for high frequency applications.
The following shapes of ferrite magnets are available: Rings, Rectangulars, Square, Segments, Discs, Cylindricals, Plasto-ferrite / Rubber Sheet / Strips, etc.
| ||
|
Our factory is well equipped with latest sophisticated machinery catering to the need for
|
| ||
| ||
| ||
|
AANAL Liquid Trap Magnets are those engineering device that removes ferrous tramp from liquid processing and conveying lines. Liquid magnetic traps separators provide magnetic protection for liquid lines and processing equipments. They preserve product purity by removing small contaminants.
They protect against tramp iron and other ferrous fine contaminations. It consists of powerful magnets to capture finest possible contaminants. Magnetic configuration ensures maximum exposure of contamination to the high intensity tubes without any obstruction to liquid flow.
Cartridge-Style Liquid Traps: For non-fibrous fluids cartridge-style liquid traps are ideal. These types of separators are utilized where the size of the contaminants is few diameters and pose no risk of clogging. When the liquid is forced towards the tightly spaced grid, the contaminants come in the effect of magnetic field, which is extracted from the liquid flow by powerful Rare Earth Magnets. The contaminants are held on the cartridge surfaces, which is later removed.
| |||
Specifications : | |||
| |||
Applications: | |||
|
Aanal Magnetic Hopper Magnets provide an efficient magnetic filtering to any hopper-fed injection moulding, blow moulding, extruders, cattlefeed plants, flour mills rice mills etc. Made up of high corecivity, permanent magnets sealed in non magnetic tubes they provide better magnetic filtering due to their high magnetic flux density.
They are designed to fit in any size of hopper. No need to make any cumbersome attachment or alteration to fix it in your hopper. Easy to clean and no maintenance, cost Makes it really a very convenient and reliable filter, providing constant magnetic protection at a low cost to your equipment and preventing expensive shut downs and delays.
Catalogue No. |
Shape | Size in M. M. |
Diameter No. of Magnetic Rods |
AMI-132 | Square | 150 x 150 | 2x38 m.m. |
AMI-133 | Square | 200 x 200 | 2x38 m.m |
AMI-134 | Square | 250 x 250 | 3x38 m.m. |
AMI-135 | Square | 300 x 300 | 4x38 m.m. |
AMI-136 | Round | Dia 150 | 2x38 m.m. |
AMI-137 | Round | Dia 200 | 2x38 m.m. |
AMI-138 | Round | Dia 250 | 3x38 m.m. |
AMI-139 | Round | Dia 300 | 4x38 m.m. |
Suspension Type Magnets use is recommended for low contamination products. If the frequency of the impurities is very much, it will make a layer shunting magnetic field. Hence, the equipment required frequnet cleaning. Over band type Magnetic Separator is recommended for this type of application. The principal applications are for processing of bulk products such as Culets, Glass, Cofee, Cereals, Minerals, Coal and Sugar etc.,
AANAL magnets can be installed at the end of belt above the head drum (Image-1) or across the Conveyor belt (Image-2).
Toavoid disturbances to the magnetic field, in both cases, the magnetic parts must be placed below the surface of the magnet.
The installation shown in Image-1 is recommended for high speeds. Due to trajectory of the products and the fact that it is then fluidized, separation is more efficient.