Our Products
Side channel blower for air massage in spa pools and swimming pools. The side channel blower can be started from the poolside using pneumatic or low-voltage controls. The blower can be installed horizontally or vertically. Pipe connections are made via an air loop 50 cm above the water surface. Blower housing, blower wheel and side channel in cast aluminum.
Features
Specifications
Maximum Working Pressure : 2.5 kg/cm2 (35psi)
Testing Pressure : 4 kg/cm2
Maximum Water Temperature : 50° C
Technical Specification
Model | Design Flow m3/h | Filtration Area | Pipe Size | Sand Required I‹g |
---|---|---|---|---|
5400-16" | 6.42 | 0.13 | 1.5 | 70 |
S450-18" | 7.92 | 0.16 | 1.5 | 80 |
S500-21” | 9.9 | 0.2 | 1.5 | 100 |
5550-22" | 11.88 | 0.24 | 1.5 | 130 |
5650-25" | 16.34 | 0.33 | 1.5 | 170 |
S700-28" | 20.3 | 0.41 | 1.5 | 190 |
S750-30" | 21.78 | 0.44 | 2 | 210 |
5800-33" | 24.75 | 0.5 | 2 | 300 |
5900-36" | 3J.68 | 0.64 | 2 | 400 |
51000-40” | 39.1 | 0.79 | 2 | 500 |
S1100-44” | 47.03 | 0.95 | Z.0 | 600000 |
51200-48" | 55.94 | 1.13 | 2 | 750 |
51400-56” | 76.23 | J.54 | 2 | J 000 |
We also have with us extensive experience in successfully matching up with the demands of Square ABS Main Drain. These are highly instrumental in matching up with the specific end usage demands in swimming pools. Further, we also ensure that these qualitative ranges of Drain Traps are made available in different finish specifications. These drain taps are used in inline agitation system & can handle both liquid and solid materials to pass through it.
Air Inlet Nozzles in Jacuzzi or Spa with 25 mm. Solvent & Threaded End Connection. Made from ABS. Suitable for Use with Blower.
Features
Features
Features