Faridabad, Haryana, India
Our Products
If your workpiece is suitable for clamping with 'TOOLFAST' Wedge clamps, our team can design and manufacture a multiple clamping fixture for you as the one shown in the picture. Please send in your enquiries with workpiece / machine table specifications of your Machining Center to enable us check suitability of our WEDGE CLAMPS and submit an offer to you.
Stop or stopper blocks in different sizes as shown in table below are available to suit all above models of low height pinch clamps (PC Series) and Heavy Duty Pinch Clamps (HDPC Series). These stops are to be mounted on the opposite side of workpiece as shown in drawing above. All faces are ground for precise stopping of workpiece. Available separately in all below sizes.
| MODEL | SUITABLE FOR PINCH CLAMP MODEL |
SUITABLE FOR T-SLOT SIZE T |
TOTAL LENGTH A |
BREADTH B |
HEIGHT C |
N. W. KGS. |
| ST-PC-1A | PC-1(A) | 12 | 55 | 30 | 15 | 0.25 |
| ST-PC-1B | PC-1(B) | 14 | 55 | 30 | 15 | 0.27 |
| ST-PC-2 | PC-2 | 16 | 66 | 38 | 18 | 0.51 |
| ST-PC-3 | PC-3 | 18 | 66 | 38 | 18 | 0.55 |
| ST-PC-4A | PC-4(A) | 20 | 95 | 48 | 24 | 0.91 |
| ST-PC-4B | PC-4(B) | 22 | 95 | 48 | 24 | 1.26 |
| ST-PC-5A | PC-5(A) | 24 | 95 | 48 | 24 | 1.28 |
| ST-PC-5B | PC-5(B) | 28 | 95 | 48 | 24 | 1.50 |
| ST-HDPC-1A | HDPC-1(A) | 18 | 95 | 62 | 38 | 1.85 |
| ST-HDPC-1B | HDPC-1(B) | 20 | 95 | 62 | 38 | 1.86 |
| ST-HDPC-2A | HDPC-2(A) | 22 | 95 | 62 | 38 | 1.87 |
| ST-HDPC-2B | HDPC-2(B) | 24 | 95 | 62 | 38 | 2.18 |
| ST-HDPC-3 | HDPC-3 | 28 | 95 | 62 | 38 | 2.44 |
These nuts have longer life as they have more number of threads than ordinary nuts.
| MODEL | THREAD SIZE | TOTAL LENGTH | TIGHTENING TORQUE NM MAX.* | N. W. KGS. |
| TELN-8 | M-8 | 12 | 25 | 0.01 |
| TELN-10 | M-10 | 15 | 50 | 0.02 |
| TELN-12 | M-12 | 18 | 90 | 0.03 |
| TELN-14 | M-14 | 21 | 140 | 0.045 |
| TELN-16 | M-16 | 24 | 220 | 0.06 |
| TELN-20 | M-20 | 30 | 420 | 0.12 |
| TELN-24 | M-24 | 36 | 730 | 0.20 |
| TELN-30 | M-30 | 45 | 1450 | 0.41 |
These nuts have flanged face for larger face contact with the surface to be tightened on.
| MODEL | DØ THREAD SIZE | DØ | A | L | TIGHTENING TORQUE NM MU. * | N. W. KGS. |
| TFN-10 | M-10 | 22 | 17 | 15 | 50 | 0.02 |
| TFN-12 | M-12 | 25 | 19 | 18 | 90 | 0.035 |
| TFN-16 | M-16 | 32 | 24 | 24 | 220 | 0.07 |
| TFN-20 | M-20 | 40 | 30 | 30 | 420 | 0.14 |
| TFN-24 | M-24 | 47 | 36 | 36 | 730 | 0.23 |
These nuts are used to couple the studs with studs or T- Bolts in order to increase their length.
| MODEL | THREAD SIZE | TOTAL LENGTH | N. W. KGS. |
| TEN-8 | M-8 | 24 | 0.02 |
| TEN-10 | M-10 | 30 | 0.04 |
| TEN-12 | M-12 | 36 | 0.06 |
| TEN-14 | M-14 | 42 | 0.09 |
| TEN-16 | M-16 | 48 | 0.12 |
| TEN-20 | M-20 | 60 | 0.23 |
| TEN-24 | M-24 | 72 | 0.41 |
| TEN-30 | M-30 | 90 | 0.82 |
Knurled outside diameter for easy gripping while quick insertion or removal.
| MODEL | SUITABLE FOR BOLT | THICKNESS | OUTSIDE DIA. | N. W. KGS. |
| TCW-10 | M-10 | 9 | 40 | 0.07 |
| TCW-12 | M-12 | 9 | 48 | 0.11 |
| TCW-14 | M-14 | 11 | 63 | 0.20 |
| TCW-16 | M-16 | 11 | 63 | 0.20 |
| TCW-20 | M-20 | 11 | 80 | 0.36 |
| TCW-24 | M-24 | 12 | 100 | 0.59 |
| TCW-30 | M-30 | 14 | 100 | 0.64 |
TOOLFAST CMM clamping kit is specially designed for 3D coordinate measuring machine and other inspection and gauging applications. The light weight construction of the aluminium clamps and aluminium / plastic elements prevent damage to granite plates and delicate workpieces. M-8 threaded* elements with hand-tightening design allows the user to apply a limited hold down force most suitable for inspection clamping.
All 62 pieces are suitably housed in an elegant wooden box N.W. 2.0 kgs.
EACH KIT CONTAINS :
|
|
'TOOLFAST' Steel Parallels are used as precision packing supports under jobs or fixtures. Made from tool steel, hardened, tempered & precision ground in matched pairs. Matched pairs are marked with identical serial numbers. All sides are chamfered. Overall sizes are nominal.
>>Hardened & Tempered 52 - 56 HRC.
>>Parallelism within 0.005mm upto 200mm length.
>>Inspection certificate is furnished.
| MODEL | SIZE | N. W. KGS. |
| TSP-20 | 10 X 20 X 150 | 0.47 |
| TSP-35 | 15 X 35 X 150 | 1.24 |
| TSP-45 | 20 X 45 X 200 | 2.80 |
| TSP-55 | 25 X 55 X 250 | 5.34 |
| TSP-60 | 30 X 60 X 300 | 8.50 |
| TSP-75 | 45 X 75 X 300 | 15.80 |
'TOOLFAST' Toggle vice cum press is a multifunction quick action vice cum press having a unique design with precision machined body on which Push Action Toggle Clamp of suitable model is mounted to make it a very versatile tool.
Toggle Vice : When side 'B' is used as base, it can be used as a quick action vice as shown in picture (b) or you can make your own drill Jig on it.
Toggle Press : When side 'A' is used as base, it can be used as a toggle press for light press operations.
| MODEL | A | PLUNGER TRAVEL B |
C | DØ | TØ | tø | h | L | W | H | PUSH ACTION TOGGLE CLAMP MOUNTED |
CAPACITY | N. W. KGS. |
| TVP-12 | 100 | 30 | 26 | 12Ø | M-8 | M-6 | 50 | 205 | 110 | 70 | MODEL PATC-12-FB | 600 KGS. | 3.7 |
| TVP-16 | 120 | 36 | 30 | 16Ø | M-10 | M-8 | 60 | 250 | 138 | 90 | MODEL PATC-16-FB | 1000 KGS. | 7.6 |
| TVP-22 | 140 | 44 | 38 | 22Ø | M-12 | M-10 | 70 | 300 | 170 | 105 | MODEL PATC-22-FB | 1500 KGS. | 15.0 |
TOOLFAST' Edge Finder is used for fast and accurate location of starting point of work pieces with respect to the machine spindle on milling or jig boring machine tables.
Application:Edge finder is used for location of edges, shoulders, grooves etc. of work pieces kept on machine table with respect to the machine spindle. Shank of the Edge Finder is held in the collet or chuck and work table is traversed to cause the rotating tip of the edge finder make contact with the edge of the work piece to be located. Once the rotating tip comes in contact with the work piece, work table is further traversed so that the rotating tip shifts to a concentric position with respect to the shank. Now any movement to "off centre" will cause a distinct 'wobble'. At this point, the distance from the work edge to the centre of machine spindle is equal to half the diameter of the tip of the edge finder. Available in single & double ended tip. In double ended tip, Edge Finder can be held from both ends and both the tips of two different sizes can be used for edge finding.
Shank and tip of the edge finder are coupled together with the help of an internal spring for independent rotation of both. It is hardened and accurately ground all over to ensure repeatability of work location within 0.01 mm.
| MODEL | SHANK DIA | TIP DIA | TYPE | N. W. KGS. |
| EF-S1 | 10 | 10 | EDGE FINDER-SINGLE END | 0.03 |
| EF-D1 | 10 | 5 &10 | EDGE FINDER-SINGLE END | 0.03 |
| EFR-10 | 10 | 10 | EDGE FINDER-DISC TYPE | 0.06 |
| EFR-104 | 10 | 4 & 10 | DISC TYPE - DOUBLE END | 0.06 |
