Write a Review
Our Products
Our offered Product range includes Silicon Rubber Sheet White Translucent, Diaphragm Rubber Sheet, Neoprene Rubber Sheet, Hypalon Rubber Sheets and EPDM Rubber Sheet.
Silicone rubber is physiologically inert, thus making it the preferred choice of medical, pharmaceutical and food processing industries. Silicone have comparatively low mechanical properties, tensile strength, elongation and tear strength, however they keep constant even at high temperatures but should not be used with high- pressure steam. Its resistance to oil and hydrocarbon products is fairly limited and similar to that of Chloroprene rubbers. Reasonable resistance to a whole range of general chemical products, but acids, alkalis, esters and kerosene should be avoided.
This Rubber sheet has high resistance to temperature and is also food grade, thus making it ideal for use in food processing industries.
Additional Information:
Payment Terms :
Delivery Time : ex-stock
The Diaphragm sheet is manufactured with high quality Nitrile Rubber Compound designed for long service. This rubber sheet is reinforced with 1 ply or 2ply Nylon fabric to provide strength. Recommended for use in control valves, regulators, pumps etc for creating differential pressures.
Neoprene Sheeting offers good resistance to heat, ozone and weathering and also good adhesion to metal.
Specific Gravity: 1.4 g/cm3.
Minimum tensile strength of 50kg/cm2.
Elongation at Break (min): 250%
Neoprene rubber sheeting withstand temperature range capacity of (-25) to (+130).
Hypalon is very resistant to attack by oxygen and ozone, and properly compounded products show excellent weathering resistance. High tensile strength is characteristic of hypalon vulcanizates, which do not need the use of highly reinforcing fillers for good tensile properties.
Compounds can be formulated for excellent abrasion resistant and for brittle temperatures as low as -60C (-76F). Hypalon vulcanizates show excellent resistant to corrosive chemicals. They have excellent electrical properties. They have good heat resistance with an "EE" rating by ASTM D2000 being obtainable. They can also be compounded for good flame resistance.
EPDM sheet (with a thickness of 1.2 mm) is 22 times more powerful than asphalt and is 59 times more reliable waterproofing than PVC sheet.
EPDM rubber sheet with a durometer of 60 shore A (+/-5) offers good resistance to oxidation, U.V. rays and ozone.
Specific Gravity: 1.3 g/cm3
Minimum tensile strength 50 kg/cm2.
Elongation at Break (min): 250%
Available in standard length of 5 Mtr, 2 Mtr , 1 Mtr
Standard Width of 1.2 Mtr
Also Available in Cut piece of 1 ft. to 1 ft. (Upto 4 mm)
Available in 10 thickness ( 1, 1.5, 2, 2.5, 3, 4, 5, 6, 8, 9, 10)mm
Ideal as EPDM pads, EPDM gasket material, EPDM seals, EPDM strips and highly recommended for outdoor uses.
Nitrile rubber or acrylonitrile butadiene rubber is a co-polymer of butadiene and acrylonitrile. It has good general resistance to oil along with good mechanical properties, especially tensile strength, flexing, compression set and impermeability to gases.
Nitrile rubber sheet with a durometer of 65 shore A (+/-5) offers good resistance to oil.
Specific Gravity: 1.4 g/cm3
Minimum tensile strength 50 kg/cm2.
Elongation at Break (min) : 250%
Available in standard length of 5 Mtr, 2 Mtr , 1 Mtr
Standard Width of 1.2 Mtr
Also Available in Cut piece of 1 ft. to 1 ft. (Upto 4 mm)
Available in 10 thickness ( 1, 1.5, 2, 2.5, 3, 4, 5, 6, 8, 9, 10)mm
Ideal as Nitrile pads, Nitrile gasket material, Nitrile seals, Nitrile strips.
Butyl Rubber Sheet, also known as Isobutylene-isoprene or IIR, offers airtight performance, particularly low gas permeability, and exceptional resistance to weathering, chemicals, ozone, and more.
This high quality rubber sheet material performs well as an insulator, in addition to providing high performance shock and vibration damping.
L. Habib (Abm Corporation)
Everest Building, No. 1616, New Shukrawar Peth. Pune, Maharashtra - 411 002 - 411002
Share us via
