Our Products
Floor stand model lamp for IR radiation treatments. IR bulb of 150w is fitted in metal casing with wire guard, automatic cut off timer of 15 mintus and an intensity control switch. Adjustable arm permits wide range of adjustments. Mounted on wide base with ball bearing casters.
Infra-Red bath cabinet, fitted with Eight I.R Lamps and intensity control regulators, is suitable for full body fomentation. Cabinet, with Digital temperature controller, is made out of good quality hardwood & ply-board, Seat height is adjustable to need of the patient. Natural Wood polish finish from outside & enamel painted inside.
Medomer air massager simulates the action of mascullor contraction and relaxation by repetetive inflation and deflation of the air chambers in automatic controlled sequence thereby promoting lymphatic and venous circulation.
The unit works on A.C.220V, and a linear air compressor features low noise and easy maintenance. Pressure range is adjustable between 60-100 mmHg. An automatic timer is fitted on the panel to prefix the duration of patient treatment.
The unit comes complete with Air Compressor, One Lower Limb Cuff, One Upper Limb Cuff and Two Extension Zippers
Ply board / Hard wood constructed foot stool with sturdy legs and natural wood finish is fitted with non woven matting. Size: 50cm long x 30cm height in two steps.
VIBRATOR / MASSAGER (Electrical) Hand-held portable, heavy duty, vibrator with wide base. Works on 220V AC.
Basic treatment cum examination table with vinyl upholstered Two-section well padded top, size 180cm x 60cm with a fixed working height of 80cm.Backrest is 67cm long and is easily adjustable for desired position. Top is fitted on painted heavy duty rectangular steel pipe frame and mounted on Four, chrome plated, 37mm dia. tubular legs for stability. (Legs are easy to assemble with a few basic tools).
Standard treatment cum examination couch with vinyl upholstered well padded top, is provided with adjustable backrest which can be adjusted in height for desired position, top is mounted on sturdily built, natural finished, solid hardwood legs.
SPECIFICATION :
Tubular steel chair with wooden rungs seat and back is comfortable for the patient to sit in semi-recumbent position and place his head on the adjustable head support for the easiness of the doctor to put medicine in the nostrils.
FEATURES :
Comfortable commode chair, constructed of square Pipe and finished in oven baked enamel, is fitted with hard wood seat with stainless steel commode and back with adjustable recline, is fitted with teak wood rungs, the side-arm supports adds comfort to the patient. Chair is mounted on 10cm heavy duty casters for mobility.
Sturdily built, sleek & elegant Abhyanga table top is constructed of mill jointed wooden board with hardwood borders. The table has a slant towards Head-end and Foot-end for collection of oil. Table can be used for Abhyanga, Shirodhara, Nasya, and Vashpa & Nadi Swedan etc.
SPECIFICATIONS :
Painted metal stand with chrome plated over-head bar is mounted on a wide tubular base, base is fitted with two wheels for mobility. Unit comes with Stainless steel oil pot of 2 lit. Capacity, brass chains & hooks to hang for shirodhara treatments.
Heavy duty, carved solid Wood stand with wide wooden base for stability. Base is mounted on four wheels for mobility. Unit comes with a Copper pot, brass chains & hook to hang for shirodhara oil treatments Pot with Oil capacity of 2 lit. is fitted with oil flow control valve mechanism. Pot with hammer marks has a bright natural finish.
Yantra is fitted with stainless steel sink for Oil Collecting, Filtration and Digital Temperature indicator cum controller for Temperature Control arrangements of the oil. Oil is lifted & Tel Dhara drops on patients forehead automatically. Flow of Oil Drops / Dhara can be controlled electrically & electrical oscillatory movement of oil pipe can be stopped if not required. An electrical Timer Stops the treatment at the pre-fixed Time. The metal cabinet with chrome plated push handle is mounted on four wheels and has Powder coated finish.
A well designed sturdily built cabinet made out of hard-wood and water proof ply, is equipped with an adjustable wooden seat & foot rest. The cabinet has laminated finish from outside & spray painted from inside. A stainless steel tray is provided to store condensed water.
Approximate size: width 28"x depth 37"x height 47".
SPECIAL FEATURES :
High power medical diathermy incorporating a high power transmitting oscillator Valve & solid state rectifiers; provides R.F. power upto 500 watts for intense deep tissue heating with out discomfort at the surface. Housed in an elegant MOBILE CABINET & designed to meet heavy work load in a hospital.
Micro-Processor based, computerized ultrasound therapy unit gives you a choice of treatment modes Continuous or in Three Pulsed wave forms. The compact digital unit with built in timer and user friendly control panel gives a wide range of treatment situations.
DONATELLO are a programmable driver units for US transducers with frequencies from 1 up to 3MHz. Through DONATELLO it is possible to obtain delivery of continuous or modulated with programmable intensity and delivery time to fit the thermo therapeutic deep treatment for different pathologic conditions.
LEONARDO delivers different types of currents suited for most of the therapy of painful syndromes or circulatory troubles, and for invigorating or hypertrophying treatment through passive gymnastics, ad rehabilitation of normoinnervated and/or denervated muscular tissues.
BERNINI STUDIO is a mobile unit delivery therapeutic microwaves (Radar-therapy) for casualty professional applications.
BERNINI STUDIO is realized applying the most advanced electronic technologies; it has a high brightness graphic display (5 size) with adjustable contrast. The utility control is made through a knob and some keys or through an optional remote control.
GIOTTO is a programmable control unit for IR LASER emitter ( = 905nm), suited for regenerative biostimulating and antalgic treatments.
It is possible to GIOTTO connect optional transducer handpieces. The transducers can have different dimensions and radiation power. This allows the operator to choice the best handpiece proper to the treatment to be done.
MICHELANGELO is an ELF magneto therapeutic unit designed for in ambulatory or at patient home professional applications, it is especially proper in the therapies that require repeated treatments for lasting a long period or therapies on traumatized or for any reason immobilized patient.
TINTORETTO is a modern and reliable compressive system of the new generation. The equipment is designed to physiotherapeutic treatments in which is in demand mechanical pressure massage for mechanical lymphatic draining.
This complete exercising unit comes with following attachments for administration of accurately controlled progressive resistive and also passive and stretching exercises to all major muscle and restoration of motion to all major joints with the exception of those of the fingers and toes. This unit has attachments for neck knee and hip flexion and extension, trunk flexion, ankle plantar and doorsiflexion, everation and inversion, internal and external rotation, adduction or abduction of the hips, shoulder exercises and hyper extension, exercises of the back.
The unit is 78" long 32" wide and the table is 34" high. The foam padded table is mounted on a tubular frame. Complete unit consists of one table, weight pan assembly and the following attachments and accessories:
Nirmal ankle and leg exerciser - 1,
Alu. Quadriceps boot adult and child - 2 each,
Alu. foot drop boot adult and child - 1 each,
Small Weight Pan - 1,
Supination and Pronation wheel-1,
Cast Iron Weight Plates;1kg, 2kg, 3kg, - 4 each,
Hip rotation attachment -1,
Abdominal & back exercise shoulder straps adult & child - 1 each,
Pelvic rest -1,
Quadricepsrest - 1,
Head harness - 2,
Wrist Cuff - 2,
Ankle cuff-2,
Aluminium bar 48"and 24"- 1 each,
Alum. bar 18" - 2,
Alu. collars - 12, Wire handles - 2,
Cast iron weight plates; 1kg, 2kg, 3kg- 6 each, 5kg -2,
& Wooden cabinet for storage - 1.
The sturdy, mobile exercise station contains everything you need for optimum patient therapy and provides storage space for the following 12 most recognized activities appropriate to a variety of patients to improve: ROM, Flexibility, Strengthening & Endurance of fingers, grip, wrist, elbow & shoulder.
SPECIFICATION:
Ruggedly built tubular steel frame stands solidily on four rubber tipped properly balanced legs. Provided with adjustable standard cycle seat and specially designed adjustable handle. Fitted with one hard rubber tyred cycle wheel and standard chain and sprocket for bicycle drive. Comes with chrome plated wing nut, pressure rod and ball bearing resistance roller which permits controlled variation in ridding effort.
Odometer shows speed and kilometer done. Oven baked finish with workingparts finish with chrome plating.
Tubular steel construction, overall sizes 210cm long x 110cm wide at the base, 50cm wide at the top and 190cm high. All welded steel rod mesh at the top for complete suspension with slings and ropes, Mesh facilitate suspension at any desired point in relation to the patient and as required in each individual case. Comes complete with Suspension Gear comprising 7 canvas slings (4 limb, 2 trunk & 1 head), 4 single hook ropes, 2 double pulley & 2 single pulley ropes with necessary hooks and cleats, 8 graduated springs of different tension, 4 'S' hooks & 2 ankle straps. Spray enamel finish.
Akay Hi-Trac, micro-computer controlled unit for INTERMITTENT/CONSTANT, LUMBER-CUM-CERVICAL TRACTION is based on solid-state circuitry. The Three section, fixed Height painted Bed with storage cabin underneath is an integral part of the unit.
TECHNICAL SPECIFICATION :
An Intermittent traction machine is an accurate & sturdy unit. Works on solid state circuitry with reliable, silent & smooth geared motor.
FEATURES :
Traction chair cervical useful in applying cervical traction. Chair adjusts easily with hand crank up to 45 for proper flexion. Chair frame is of tubular steel with durable oven baked finish. Thick upholstery covers the seat and back rest. Overall dimensions are 56cm wide x 90cm long with 4 ball-bearing casters with brakes.
Used as an OT positioning device to place the head in a rest & fix position without any discomfort.
Used as a OT positioning device for arm rest purpose & fix it without any discomfort.
ADVANTAGES:
Provide maximum rest without any discomfort because it has: