Electric Control Panels #5705127

We are the main supplier of this product.

SOLAR ACDB DCDB is a part of solar power plant. When sunlight is incident on the solar panel, the current and voltage is generated in the terminals of solar cell. A grid connected solar Photo Voltaic system consists of the following components.Solar Photo Voltaic array, Array combining box, DC Cabling, DCDB, Inverter, AC Cabling and ACDB. In Other words, Solar ACDB is AC Distribution board and Solar DCDB is DC Distribution Boards. Solar ACDB DCDB is LT panels that distribute power from Invertor to Load

ACCU-PANELS is a leading Supplier of Solar ACDB DCDB, Array Junction Box, Solar Combiner Box, LT panels, TVM panel, NVR Box, Metering Panels and all type of Solar AC/DC Distribution Boards, AC Distribution Panel Board (DPB) will be control the AC power from PCU/inverter, and should have necessary surge arrestors.

Standard

Interconnection from ACDB to mains at LT Bus bar while in grid tied mode. All switches and the circuit breakers, connectors should conform to IEC60947, part I, II and III/ IS 60947 part I, II and III.Electrical standards followed include Indian and international standards like IS 8623, IEC 60529.

Protection Level

Firstly, all indoor panels have protected with IP54 or better even more all outdoor panels have protected with IP65 or better. Secondly, all PCC Panels made by laser cutting CRCA sheet and powder coating with 7-Tank process. In addition, Accu-panels have provided IP65 certificates for solar acdb dcdb.

Product Range :

• 1-5KW Solar ACDB (Ac Distribution
• Board) Standard
• 10-50KW Solar ACDB (Ac
• Distribution Board) Standard
• 50-1MW ACDB LT Panels As per
• Client Specification
• 1in 1out DCDB ACDB
• 2in 2out DCDB
• 4in 4out DCDB
• 8in 8out DCDB
• 10in 10out DCDB
• 1in 1out ACDB up to 10KW
• 2in 1out ACDB up to 10KW
• 3in 1out ACDB up to 25KW
• 4in 1out ACDB up to 200KW
• 5in 1out ACDB up to 500KW
• 6in 1out ACDB up to 500KW
• 7in 1out to 20in 1out up to 4000A (500KW to 10MW)

Application :

What is PCC Panel ?PCC panel is using for distribution and control of various electrical power source in Industry. Therefore, it is most important in electricity. PCC panel is a distribution board in LT panels. In other words, it can distribute the power from the generation to production. Accu-Panels is leading pcc panel manufacturer in india

Standards of PCC Panel PCC panel also known as Power Control Centre Panel because it can control the control power source. Similarly they are designed as per IS standard IS 8623, IEC 60529. In addition, all switches and the circuit breakers, connectors conformed to IEC 60947, part I, II and III/ IS 60947 part I, II and III.

RatingsAccu-Panels manufacturing the PCC Panel with high standard of quality and reliability. As a result, Accupanels is a top 10 electrical panel manufacturer. LT panels is designed with rated current ranging from 100A to 6300A and up to 65KA and 80KA fault level.

Protection LevelFirstly, all indoor panels have protection of IP54 or better even more all outdoor panels have protected with IP65 or better. Secondly, all PCC Panels made by laser cutting CRCA sheet and powder coating with 7-Tank process.

What’s New Additionally, all Our LT panels having undergo pretreatment for Decreasing, Water rinsing & De-rusting/ Phosphating, also all LT panels Painted with Powder Coated or Synthetic enamel as per the requirements. After that, seven tank process made by the painter. Similarly, Bus Bars / Internal Wiring uniform cross section and supported by SMC and DMC bases. Similarly, earthing Bus Bars running all along the Panel. In Conclusion, PCC panel are an important aspect of electrical control panels and LT panels.

StructureAll the Panel’s with metal clad, totally enclosed, rigid, floor mounted, air -insulated, cubical type suitable for operation on three phase / single phase, 415 or 230 volts, 50 Hz. Power control center panel have designed for minimum expected ambient temperature of 45 degrees Celsius. Also 80 percent humidity and dusty weather.
Accu-panels focus the product and services delivery to industries such as solar power plant, Utilities of industries, Manufacturing plants, Mining and ball mills, Food Beverage, Marine, Construction and Other industries that require a reliable partner for cost effective solution for electrical panels.

Introduction

We are manufacturing NVR Panel, Protection against single phasing or reverse phasing or unbalance supply is one of the major problems in electrical systems.

Its particular special feature is it automatically trips incoming power whenever one of three phases fails with special kind of relay in conjunction used with contactor, spd, mcb, A/M selector switch. After operation of relay, relay doesn’t reset to its original position until all the phases becomes healthy.

We are the main supplier of this product.

What is pdb panel? Power Distribution Board (PDB pancl) is a component of an electrical system which Distribute electrical power into subsidiary circuit by circuit breaker and switch fuse unit. Power Distribution Board also known as power distribution board panel of electrical panel. In addition, equipped complete with all type of required number of air circuit breakers, switch fuse unit, contactor, protective relays, fuses, motors, indicating lamps, push buttons, busbar etc.

What we are offering? Additionally, all Power Distribution Board (PDB pond) having undergo pretreatment for Dosing, Water rinsing & De-rusting/ Phosphating, also all LT panels  Pointed with Powder Coat. or Synthetic enamel as per thc rcquircments. After that, seven tank proccss made by the painter, Similarly, Bus Bars / Internal Wiring uniform cross section and supported by SMC and DMC hoses.

Structure We are making panels With metal clad enclosed and fabricated out of high quality CRCA shoot. We provide busbar According to the air insulated and made high quality, high conductivity, high strength copper/Aluminium with ht shrinkable PVC sleeves and colour coded in red, Yellow, Blue and Black to identify the throe phases and nautral of the system as per relevant IS code. Accu Pancls is providing best quality and customized PDB panels with customized solutions as per client requirement.

Protection LevelFirstly, all indoor panels have protection of IP54 or better even more all outdoor panels have protected with IP65 or better. Secondly. all PCC Panels made by laser cutting CRCA sheet and powder coating with 7-Tank process.

Standards of PDB Panel PD8 panel are designed as per IS standard IS 8623. IEC 60529.In addition, all switches and the circuit breakers, connectors conformed to IEC 60947, part I, II and III/ IS 60947 part I, II and III.

Specifications All the Panel's with metal clad, totally enclosed, rigid, floor mounted, air -insulated. cubical type suitable for operation on three phase / single phase, 415 or 230 volts, 50 Hz. Power control center panel have designed for minimum expected ambient temperature of 45 degrees Celsius. Also 80 percent humidity and dusty weather.

Applications

• Rcsidential, Commorcial and industrial purposcs.
• Hotels
• Hospitals
• Schools
• Cement lndustries
• Sugar lndustries etc.

We are the main supplier of this product.

We are the main supplier of this product.

We are the main supplier of this product.

in many commercial and industry applications, multiple electric motors are required, and it is often desirable to control some of the motors. the apparatus designed for this type of function is the motor control center panel (mcc panel).

when a motor operation runs with the protection of overload relays or solid-state motor controllers. an mcc panel manufacturer has control from a remote or local that is called a motor control panel.

mcc panels have multiple combination starters with various motor protection. accu-panels is known as the best quality manufacturer supplier for motor control solutions in ahmedabad india.