• Machine body is steel (St-52) construction.
• On APK 61 - 81 rolls are driven by electric motor+planetry gearbox and gears.
• Hardened rolls.
• Shafts made of special steel (42CrMo4), hardened and grounded.
• On APK 61 -81 guide rolls are in one direction manual adjustable.
• Horizontal and vertical working.
• Torque limiting device protecting from overload during bending.
• Lower rolls hydraulic moveable up and down.
• Digital display for lower rolls.
• Separate and moveable control panel.
• Electrical and hydraulic protection against overloads.
• Manual lubrication
• 400 Volt / 50 hz
• Instruction manual.
• Suitable for CE

Akyapak manufactures 3 roller Hydraulic Plate Bending Machines with the capacity of bending from 2 mm up to 140 mm for thickness and from 1000 mm to 6000 mm for width.Akyapak machines are designed with 3D CAD programs and all calculations are carefully checked with analyzing programs by experienced high skilled engineers before productions are started. All necessary electrical and hydraulic safety precautions are taken by Akyapak technical staff. The specifications of Akyapak Machines are harmonious to CE norms.

Akyapak manufactures 3 roller Hydraulic Plate Bending Machines with the capacity of bending from 2 mm up to 140 mm for thickness and from 1000 mm to 6000 mm for width.

Some features of Akyapak s 3 roller Hydraulic Plate Bending Machines are :

• All Rolls are hydraulically driven.

• Up & Down movements of the side rolls are hydraulically powered.

• Drop-end ( cover ) controlling system to open and close from control panel.

• Top roll tilts up

• Rolls are driven by 3 separate hydraulic motors and gearbox ( up to 230 mm diameter

The frames of the machines are welded steel construction. The roll shafts, bearings used in production are good ( European ) quality. Also the torque limits of the machines are very high.

Spherical bearings are used for the rolls to minimize frictional resistance, which improves the capacity of the machines.

Akyapak machines are designed with 3D CAD programs and all calculations are carefully checked with analyzing programs by experienced high skilled engineers before productions are started. All necessary electrical and hydraulic safety precautions are taken by Akyapak technical staff. The specifications of Akyapak Machines are harmonious to CE norms.

• PLC based control system.
• Servo control of rotation axis.
• Bending system is hydraulic.
• Assistant axises are hydraulic.
• Moving ahead and backwards is done manually.
• Manual and automatic working capability.
• Tube length can be computed according to part program.
• Programming in YBC mode.
• Touchscreened panel PC.
• Opportunity to use mandrel in both automatic and manual bending processes.

The profile that will be drilled is brought to the position in the marking unit the means of servo motor unit and its marked with the hydraulic stroke unit. Also, the profile is brought to band saw machine by the same drive unit and it is cut in the size that desired.The profile which is completely worked is brought to the outfeed conveyor by infeed conveyor arm.
All the system are the same as in the 2 ADM the only difference is the third axis is Added to every spindle beside x and y axis. Advantage: in 2 ADM, the profile is brought the text drilled line position after one line is drilled.
Profile Drilling Center ADM 1200-40 CNC is considered as an integrated system. This system is consisting of Profile Drilling line input conveyor + ADM 1200 Drilling machine + marking unit + band saw + output conveyor.With CNC (Computer Numeric Control)you will be able to control all the ADM 1200 CNC Drilling machine connected to this system. To drill the steel beams used on metal bridges and constructions , the profile should be located on the input conveyor. Then it will be moved and brought its position with the servo motors through the CNC, special variable screw drive groups and linear ball bearings.In order to facilitate the movement of the beam on the conveyor , there is a mechanism of free rotation between the reducer and the rollers.

ERMAK CNCHVR angle adjustable hydraulic guillotine shears are strong and easy to use machines which are able to cut any type of sheet with the best quality and speed. Machines could be programmed easily with the use of dialog programs on CYBELEC control units. When the type, thickness and length of the sheet is entered to the controller, machine calculates and adjusts blade gap adjustment, backgauge distance, cutting length and cutting angle automatically. Cutting angle adjustment is done automatically according to sheet thickness, so during cutting thin sheets, the shortest stroke is used.

after sales support. LASERMAK Presents reflects nowadays latest technology and meets whole expectations by its high performance, high velocity, high accuracy, wide application range, low running and maintenance costs features to the sheet metal working machinery users' utility as a result of R&D labors.

• Machine body is steel (St-52) construction.
• On APK 61 - 81 rolls are driven by electric motor+planetry gearbox and gears.
• Hardened rolls.
• Shafts made of special steel (42CrMo4), hardened and grounded.
• On APK 61 -81 guide rolls are in one direction manual adjustable.
• Horizontal and vertical working.
• Torque limiting device protecting from overload during bending.
• Lower rolls hydraulic moveable up and down.
• Digital display for lower rolls.
• Separate and moveable control panel.
• Electrical and hydraulic protection against overloads.
• Manual lubrication
• 400 Volt / 50 hz
• Instruction manual.
• Suitable for CE

Akyapak manufactures 3 roller Hydraulic Plate Bending Machines with the capacity of bending from 2 mm up to 140 mm for thickness and from 1000 mm to 6000 mm for width.Akyapak machines are designed with 3D CAD programs and all calculations are carefully checked with analyzing programs by experienced high skilled engineers before productions are started. All necessary electrical and hydraulic safety precautions are taken by Akyapak technical staff. The specifications of Akyapak Machines are harmonious to CE norms.

Akyapak manufactures 3 roller Hydraulic Plate Bending Machines with the capacity of bending from 2 mm up to 140 mm for thickness and from 1000 mm to 6000 mm for width.

Some features of Akyapak s 3 roller Hydraulic Plate Bending Machines are :

• All Rolls are hydraulically driven.

• Up & Down movements of the side rolls are hydraulically powered.

• Drop-end ( cover ) controlling system to open and close from control panel.

• Top roll tilts up

• Rolls are driven by 3 separate hydraulic motors and gearbox ( up to 230 mm diameter

The frames of the machines are welded steel construction. The roll shafts, bearings used in production are good ( European ) quality. Also the torque limits of the machines are very high.

Spherical bearings are used for the rolls to minimize frictional resistance, which improves the capacity of the machines.

Akyapak machines are designed with 3D CAD programs and all calculations are carefully checked with analyzing programs by experienced high skilled engineers before productions are started. All necessary electrical and hydraulic safety precautions are taken by Akyapak technical staff. The specifications of Akyapak Machines are harmonious to CE norms.

• PLC based control system.
• Servo control of rotation axis.
• Bending system is hydraulic.
• Assistant axises are hydraulic.
• Moving ahead and backwards is done manually.
• Manual and automatic working capability.
• Tube length can be computed according to part program.
• Programming in YBC mode.
• Touchscreened panel PC.
• Opportunity to use mandrel in both automatic and manual bending processes.

The profile that will be drilled is brought to the position in the marking unit the means of servo motor unit and its marked with the hydraulic stroke unit. Also, the profile is brought to band saw machine by the same drive unit and it is cut in the size that desired.The profile which is completely worked is brought to the outfeed conveyor by infeed conveyor arm.
All the system are the same as in the 2 ADM the only difference is the third axis is Added to every spindle beside x and y axis. Advantage: in 2 ADM, the profile is brought the text drilled line position after one line is drilled.
Profile Drilling Center ADM 1200-40 CNC is considered as an integrated system. This system is consisting of Profile Drilling line input conveyor + ADM 1200 Drilling machine + marking unit + band saw + output conveyor.With CNC (Computer Numeric Control)you will be able to control all the ADM 1200 CNC Drilling machine connected to this system. To drill the steel beams used on metal bridges and constructions , the profile should be located on the input conveyor. Then it will be moved and brought its position with the servo motors through the CNC, special variable screw drive groups and linear ball bearings.In order to facilitate the movement of the beam on the conveyor , there is a mechanism of free rotation between the reducer and the rollers.

ERMAK CNCHVR angle adjustable hydraulic guillotine shears are strong and easy to use machines which are able to cut any type of sheet with the best quality and speed. Machines could be programmed easily with the use of dialog programs on CYBELEC control units. When the type, thickness and length of the sheet is entered to the controller, machine calculates and adjusts blade gap adjustment, backgauge distance, cutting length and cutting angle automatically. Cutting angle adjustment is done automatically according to sheet thickness, so during cutting thin sheets, the shortest stroke is used.

after sales support. LASERMAK Presents reflects nowadays latest technology and meets whole expectations by its high performance, high velocity, high accuracy, wide application range, low running and maintenance costs features to the sheet metal working machinery users' utility as a result of R&D labors.