Accusharp Cutting Tools

Bhosari Midc, Pune, Maharashtra

ACCUSHARP offers a complete range of high performance, general purpose, finishing, roughing, high-speed, micro and material-specific S/C Step drill for high productivity and extended tool life. HSN2 coating for higher life , Solid Carbide drill that offers a one-pass solution in steels and irons in traditional tap sizes to reduce cycle time and increase productivity.Drilling and chamfering in one shot.The highly polished surface ensures superior chip evacuation even when low-pressure coolant is applied. Drill or drill machining tools used for making round holes in solid material. Drilling tools are end cutting tools designed for producing holes in work piece.

Accusharp micro twist drill bits are excellent for producing smooth, precision holes and drilling through all hard metals. ACCUSHARP offers a family of small diameter carbide micro drill for precision drilling in medical, aerospace and the automotive industry. The Exclusive Line of high precision carbide drills are available in solid and coolant fed carbide designs from 0.30 mm to 3.0 mm diameter

Accusharp Solid Carbide TCH Double Margin Long Drills reduced 80% cycle time as compared to Conventional deep hole drilling. Double margin drills have a second margin ground behind the main margin. The trailing margin burnishes the cavity, making a true hole and smoother finish while providing a more accurate, rounder drilled hole and frequently eliminating the need for reaming. HSN2-based coating with high hot hardness allows 30% higher cutting speeds and constant tool life. Four-margin lands improve hole straightness and hole alignment when drilling through cross holes.

The Taper Step Subland Drill from Accusharp Cutting Tools is engineered for multi-diameter drilling in a single operation. Made from solid carbide, it reduces tool changes, cycle time, and ensures superior hole accuracy for high-performance industries.

Description Chip pockets are broad, allowing for superior chip management and evacuation. The new HiPIMS Coating, which is designed specifically for cutting drill, ensures consistent and long tool life in a wide range of work materials and applications. For tiny machines, it provides solid drilling with no wobbling and a better hole finish with a double margin. Hole guiding regions on two cutting edges enable Accusharp to provide reliable high-quality hole machining in terms of cylindricity and straightness, as well as near hole tolerance, premium surface roughness and production stability. The toughest and most brittle of the drill bit materials is carbide. Its mostly utilized for cutting drilling, which necessitates the employment of a high-quality tool holder and equipment. It should not be utilized in drill presses or hand drills. These drill bits are made for the toughest and most demanding materials. Tips1) Ensure surface is machined before drilling2) Use the precision-specific ACCUSHARP Pilot drill for pre-drilling3) Check for wear on Pilot drill throughout the operation, which can lead to premature tool failure4) Ensure maintaining coolant pressure and good filtration of coolant

Description ACCUSHARP make center drills are used in Automotive, Aerospace & other manufacturing industry. Center Drills are used for providing centering holes on shafts faces, so to hold them between centers for other CNC job work. Carbide Center Drill bits are Good for large batch production.Carbide Center Drills comes with varied chamfer angles of 45 / 60 or as per customer request or drawings

Accusharps Bearing Cage Pocketing Drill is specially engineered for precision pocket drilling in non-ferrous materials such as aluminum, brass, and copper alloys. Manufactured from premium solid carbide, this tool delivers excellent rigidity, superior tool life, and high accuracy, making it the ideal choice for the automobile industry and precision component manufacturing.

Most medium hardness materials such as steel, SS, brass, iron and non ferrous materials are milled using ACCUSHARP end mills, which are constructed from premium sub micron graden carbide. Nano, Ultrafine, and Submicron grades of carbide are what are commonly utilized for end mills. Binder content ranges between 3 and 12 percent by weight. Grain sizes less than 1m have the highest hardness and compressive strengths, as well as remarkable wear resistance and breaking reliability. Die and mould, automotive, aerospace and other industries are among the well-supplied. Solid Carbide Cutting Tools for milling hardened die steel and tool steel such as D2, D3, H13, and others up to 65 HRc. End mills are a type of cutting instrument that is used in end milling activities.

ACCUSHARP Cutting Tools manufactures a variety of roughers for a wide range of materials and conditions. Heavy cuts can be achieved because our roughing end mills have a much higher effective feed per tooth than a conventional end mill. Normally a 20% reduction in effective horsepower is used. Roughers have chip-breaker cutting edges, the peaks on each cutting edge provide the cutting action producing short fat chips rather than long stringy chips produced by conventional mills. ACCUSHARP roughers remove more metal in less time than other types of end mill. Our tools can take heavier cuts at higher speeds with less chatter and vibration. The tooth form, both coarse and fine pitch, provides excellent heat dissipation during heavy cutting operations, making the tool especially effective for cutting high tensile steels

Use for contouring and radius parts and surfaces. Designed to cut a variety of materials, including nickel base alloys, stainless steel, difficult alloys, abrasive and non-ferrous metals. Premium submicron grain carbide is used.Die and mould industries, automobile industries, aerospace industries, and other industries are among the well-supplied. ACCUSHARPs four flute ball end mill design allows for a lot of chip evacuation, making it ideal for contouring deep pockets in moulds and dies.

Roughers are manufactured by ACCUSHARP Cutting Tools for a variety of materials and circumstances. Because our rougher end mills have a far higher effective feed per tooth than a typical end mills, we can make deep cuts. In most cases, a 20% reduction in effective horsepower is applied. Chip-breaker cutting edges are used on roughers, and the peaks on each cutting edge provide the cutting action, resulting in short fat chips rather than the lengthy stringy chips generated by traditional mills. ACCUSHARP other types of end mills remove less metal in less time than solid carbide rougher end mills. With less chatter and vibration, our tools can handle heavier cuts at higher speeds. The coarse and fine pitch tooth forms provide good heat dissipation during heavy cutting operations, making the tool particularly useful for cutting high tensile steels

Accusharps Single Flute Endmill is designed for high-speed machining where superior surface finish and efficient chip evacuation are critical. Engineered for automotive and precision engineering industries, it ensures high performance under demanding production conditions.

Description Acuusharp reamer is a type of rotary cutting tool used for surface finishing operation along with controlled tolerated hole. A typical reamer geometry consists of parallel/ straight or helical cutting edges along the length of a cylindrical body. All cutting edges are ground at a slight angle and with a slight undercut below the cutting edge. This ensures a long life for the reamer and a superior finish to the hole. having HSN2 and Alcorna coating for good surface finsih and less wear of the tool using high parameters with the best design. Availble in straight, helical degin with Solid and TCH form. Reaming is a part of the precision machining process or finishing process. holes are mainly reamed in case of special requirements around surface quality, roundness, cylindricity and diameter tolerance. Uses of Reamer: Reamer is a rotary cutting tool used in metal workingThe process of enlarging the holes is called reamingReamer tool for those who are looking for more precise holeReamer cannot be used to originate a hole

A reamer with two or more enhanced cutting diameters is known as a combination reamer. The advantages of utilizing a combination reamer is that it reduces the number of operations while holding depths, internal diameters and maintaining aligned concentricity more accurately. All types of stainless steel, hardened steel and mixed alloyed steel are suitable. HiPIMS coating has a long tool life and is less wear resistant than other coatings.

Description ACCUSHARP has a wide variety of Solid Carbide TIP T-Slot Cutter options, including high-performance, general purpose, finishing, roughing, high-speed, micro and material specific options. T-Slot Cutter with Solid Carbide Tip for High Productivity and Long Tool Life. T-grooving and milling are both possible with the T-Slot / Carbide cutter. Both side faces are bladed, unlike key sheaths, making it suited for processing T grooves. To support high precision groove cutting, the tip is formed of solid carbide

The Fir Tree Cutter from Accusharp Cutting Tools is engineered for high-precision machining of aerospace and turbine components. Manufactured from premium solid carbide, this tool delivers maximum rigidity, exceptional wear resistance, and reliability for the most demanding applications.