ACD Rotating Vane Sensor is totally made of metal parts and can stand to rigorous industrial conditions. It consists of a Chemically Etched Stainless Steel Turbine, fitted on a Brass shaft with Stainless Steel pins, which is pivoted on re-enforced Jewel Bearings, making it extremely sensitive to minute changes in the air-flow. All other parts are of Aluminum. Non-contact transducer is insensitive to vibrations, dust, temperature, humidity, and ultrasonic radiation.

These Mechanical Switches being used in yester years have very little merit and served the purpose when the requirement was not stringent. As they rely on large impacts or inertia (both acceleration): they do not respond to gradual increase in vibrations. Nuisance tripping during start-up is an usual problem. Further, sensitivity adjustment is too ambiguous to offer any meaningful translation. Read more...

All kinds of mechanical switches being used in yester years have hardly any merit and dished up the reason when the necessity was not stringent since they rely on large impacts or inertia both acceleration: they do not respond to gradual increase in vibrations. Nuisance stumbling during start-up is an usual problem. Further, level of sensitivity adjustment is too unclear to offer any significant translation.

• Supply110 or 220 V AC +/- 10%; or 24 V DC
• Range10mm

Electronic vibration switches are manufactured and developed to replacing with multiple advantages and saving energy of mechanical vibration switches. We are certified private limited manufacturers, suppliers, dealers, traders, exporters of electronic vibration switches to all over the world. We are located in Mumbai, India and operating from 1970. All kinds of mechanical switches being used in yester years have hardly any merit and dished up the reason when the necessity was not stringent since they rely on large impacts or inertia both acceleration: they do not respond to gradual increase in vibrations. Nuisance stumbling during start-up is an usual problem. Further, level of sensitivity adjustment is too unclear to offer any significant translation. ACD Electronic Vibration switches can be directly installed in place of Mechanical Vibration Switches and offer immense advantages. The basic Sensor is Piezo Electric Accelerometer which has no moving parts. These electronically integrate the Acceleration signal giving Velocity signal. Vibration could be controlled very precisely with graduated controls. Built in electronic delay takes care of startup and other spurious signals. Remote reset is another positive advantage.

• ZERO CURRENT OFFSET: +/- 0.5 mA
• LINEARITY OF OUTPUT: WITHIN +/- 1% OF

Rotating Machinery users are aware that Vibration free Machine means increased reliability and longer life due to reduced wear and tear. High standards set by present day technical advancements require quality dynamic balancing equipment and machines. Dynamic Balancing Equipment manufacturers, suppliers, exporters, dealers and traders in Mumbai India since 1970 to all over the world according client's requirements ACD dynamic balancing equipment and machines are developed through highly specialized experience in the field of Electronic Measurement of Mechanical Vibrations and feed back received through users of our Machines for the last 30 years

All kinds of mechanical switches being used in yester years have hardly any merit and dished up the reason when the necessity was not stringent since they rely on large impacts or inertia both acceleration: they do not respond to gradual increase in vibrations. Nuisance stumbling during start-up is an usual problem. Further, level of sensitivity adjustment is too unclear to offer any significant translation.

• Supply110 or 220 V AC +/- 10%; or 24 V DC
• Range10mm

ACD Rotating Vane Sensor is totally made of metal parts and can stand to rigorous industrial conditions. It consists of a Chemically Etched Stainless Steel Turbine, fitted on a Brass shaft with Stainless Steel pins, which is pivoted on re-enforced Jewel Bearings, making it extremely sensitive to minute changes in the air-flow. All other parts are of Aluminum. Non-contact transducer is insensitive to vibrations, dust, temperature, humidity, and ultrasonic radiation.