Other Products / Services #3708598

Inexpensive air guns are sold through many catalogs and industrial supply companies. Most have triggers or other parts that break quickly. Their performance is similar to open pipe, where they simply blow a lot of compressed air. In addition to the high air consumption, many produce noise levels that violate OSHA requirements. Some even generated dangerous dead end pressures that can result in serious or fatal injuries if blocked. EXAIR's Safety Air Guns eliminate these problems.

They are durable and comfortable to use. Each model uses an enginered Air Nozzle that provides superior performance by entraining large volumes of surrounding air. Safe operation is assured along with low air consumption and noise levels. Airflow that exists the nozzle can not be blocked as required by OSHA stnadard 1910.242(b)

EXAIR'S compressed air operated Line Vac connects to standard hose or tube to create a powerful in-line conveyor. The compact design featuers large throat diameters for maximum throughput capability. Eleven sizes in aluminium and ten in stainless steel are suited to a wide variety of transfer applications. Line Vac conveyors are ideal for moving large volumes of material over long distances. A small amount of compressed air is injected through directed nozzles to produce a vacuum on one end and high output flows on the other, with instantaneous response. The material flow rate is easily controlled with a pressure regulator. An optional bracket permits easy mounting. No moving parts or electricity assures maintenance free operation.

A simple, low cost way to move air, smoke, fumes and light materials. Air Amplifiers utilize the coanda effect, a basic principle of fluidics, to create air motion in their surroundings. Using a small amount of compressed air as their power source, Air Amplifiers pull in large volumes of surrounding air to produce high volume, high velocity outlet flows. Quiet, efficient Air Amplifiers will create output flows up to 25 times their consumption rate. Air Amplifiers have no moving parts, assuring maintenance-free operation. No electricity is required. Flow, vacuum and velocity are easy to control.

EXAIR Vortex Tubes are constructed of stainless steel. The wear resistence of stainless steel, as well as its resistance to corrosion and oxidation, assures that EXAIR Vortex Tubes will provide years of reliable, maintenance free operation. A low cost, reliable maintenance free solution to a variety of industrial sport cooling problems. Using an ordinary supply of compressed air as a power source, vortex tubes create two streams of air, one hot one cold, with no moving parts. Vortex tube can produce : Temperatures from -50 deg C to +260 deg F(-46 deg to +127 deg C), Flow rates from 1 to 150 SCFM (28 TO 4, 248 SLPM), Refigration up to 10, 200 Btu/hr. (2, 571 Kcal/hr.) Temperatures, flows and refigration are adjustable over a wide range using the control valve on the hot end exhaust.

EXAIRs Digital Flowmeter is the easy way to monitor compressed air consumption and waste! The digital display shows the exact amount of compressed air being used downstream. This makes it possible to save thousands of dollars per year in compressed air waste helping to identify costly leaks or inefficient air products. Many companies install the Digital Flowmeter on each major leg of their air distribution system to constantly monitor and reduce compressed air usage.

	Advantages
	Easy to install
	Summing Remote Display And Data logger Available
	No Moving Parts
	Sensitive At Low Flows
	No Calibration Or Setup required
	Includes All Components For Installation
	Model From 1/2" to 4 Schedule 40 Iron Pipe in Stock
	Model Are Available For Sizes 1/2" to 6" in Iron Pipe
	Model Are Available For Sizes 3/4" to 6" in Copper Pipe

Two-dimensional inspection or counting tasks are important in automation. SICKs automation light grids can be used in a number of these solutions, such as detecting and counting irregularly shaped objects, people and vehicles, and checking for presence and pallet overhang detection. The tasks are so versatile that one light grid cannot fulfill the requirements of every application. Light grids from SICK offer multiple ranges, heights, sizes, orientations, and resolutions which simplify integration through high flexibility and performance.

Paths, position, angle an encoder is the first choice when it comes to precise position detection in industrial automation. The same applies to revolutions and rpm, speed and acceleration. High-resolution optical systems and very robust magnetic systems complement one another perfectly and permit exact position detection in all kinds of applications. Rotary encoders are divided into incremental and absolute encoders. Wire draw encoders and linear encoders with material measure are available in linear measuring technology.

Materials such as paper, plastic or textiles normally contain an equal number of positive and negative charges that is, they are electrically balanced. Friction can disturb this balance, causing the material to become electrically charged. The electric charge(Static) will exert a force on nearby charged objects or a grounded conductor. Among the problems caused by this force are Dust clinging to product, Product clinging to itself, rollers, machine beds or frames, Materials tearing, jamming or curling, Sheet feeding problems, Hazardous sparks or shocks.

EXAIR'S static eliminators (called ionizers) can eliminate the charge. These shockless ionizers are electrically powered and produce a bulk of positive and negative ions. The charged surface attracts the appropriate number or positive or negative ions from the ionizer to become neutral( discharge)

Scroll Compressors Scroll Compressors Presenting scroll compressors manufactured by anest iwata, japan and marketed in india under the joint venture between anest iwata and sumi motherson group. The venture is popularly recognized as anest-iwata motherson ltd. These oil free scroll compressors are extensively used for industrial air applications. The range of our scroll compressors has the following features: low maintenance frequency 100 % oil free air low noise and vibration levels plc controller operation & maintenance ensures zero oil contamination no oil related product rejection no oil related process breakdown workplace compressor

EXAIR's Cold Gun is non-adjustable to prevent freeze-up during use. Cold airflow and temperature drop are factory set to optimize the gun's cooling capability. Heat build up on dry machining operations reduces tool life and machining rates. The Cold Gun Aircoolant System produces a stream of clean, cold air at 50 deg F (28 degC) below supply air temperature. Operation is quiet and there are no moving parts to wear out. It will remove heat to prolong tool life and increase productivity on machining operations when liquid coolants cannot be used. The Cold Gun is alos an alternative to expensive mist system. It eliminates the costs associated with the purchase and disposal of cutting fluids and worker related health problems from breating airborne coolants or slipping on wet floors.

The Vortex tubes incorporated in the EXAIR Cabinet Coolers are constructed of stainless steel. The wear, corrosion and oxidation resistance of stainless steel aussures long life and maintenance free operation. All Cabinet Coolers are UL Listed and CE compliant. EXAIR Cabinet Coolers incorporate a vortex tube to produce cold air from compressed air- with no moving parts. The compact Cabinet Cooler can be installed in minutes through a standard electrical knockout. NEMA 12, 4 and 4X Cabinte Coolers that match the NEMA rating of the enclosure are available in many cooling capacities for large and small control panels.

• Small, compact, with high flow rates and sturdy from individual valves to sub-bases
• Electrically and pneumatically actuated directional control valves.
• Standards-based directional control valves, universal directional control valves, flow control valves, shut-off valves, one-way flow control valves
• Electric components for valve terminals

Filter regulator: filter and regulator in one unitStandard regulator with different pressure regulation rangesOn-off valve for switching on and for exhausting, soft-start valve for gradual pressure build-up

Pneumatic connections for various working environments Fittings and connectors for tubing Push-in-fittings in L-, T-, X- and Y-shape

Cold Air for Industrial Spot Cooling ProblemsEXAIR Vortex Tubes are constructed of stainless steel. The wear resistence of stainless steel, as well as its resistance to corrosion and oxidation, assures that EXAIR Vortex Tubes will provide years of reliable, maintenance free operation. A low cost, reliable maintenance free solution to a variety of industrial sport cooling problems. Using an ordinary supply of compressed air as a power source, vortex tubes create two streams of air, one hot one cold, with no moving parts. Vortex tube can produce : Temperatures from -50 deg C to +260 deg F(-46 deg to +127 deg C), Flow rates from 1 to 150 SCFM (28 TO 4, 248 SLPM), Refigration up to 10, 200 Btuhr. (2, 571 Kcalhr.) Temperatures, flows and refigration are adjustable over a wide range using the control valve on the hot end exhaust.

EXAIR's compressed air operated Reversible Drum Vac System attaches quickly to any closed head 30, 55 or 110 gallon drum. Its high powered vacuum fills a 55 gallon drum in less than two minutes. With the simple turn of a knob, the same stainles steel pump quickly empties the drum. Coolant sumps can be easily refilled, floor spills vacuumed, or contaminated liquids transferred to filtration tanks in minutes. The flow rate in and out of the drum can be controlled with the knob, making it ideal for dispensing liquids.

EXAIR's Mini Reversible Drum Vac System delivers the same two-way action for small jobs. It comes complete with a 5 gallon drum and all the tools. Electrically operated "all purpose" vacuums aren't designed for use in industrial environments. As a result, motors wear out quickly impellers clog. The Reversible Drum Vac does not use electricity and has no moving parts, assuring maintenance free operation. An automatic safety shutoff valve prevents spills or overfilling.

The Ultrasonic Leak Detector (ULD) is a hand-held, high quality instrument that can locate costly leaks in a compressed air system. A person using the ULD need only aim it in the direction of a suspected leak. When a leak is present, an audible tone can be heard with the use of the headphones, and the LED display will light. Testing the various unions, pipes, valves and fittings of a complete installation can be done quickly and effectively at distances up to 20' (6.1m) away!

	Advantages
	Detects any pressurized air leak up to 20 feet (6.1m) away
	Converts ultrasound to an audible frequency
	LED display confirms the leak location
	Detects leaks in noisy industrial environments
	Sensitivity controls provide accurate detection
	Not affected by contaminants or windy conditions
	Includes accessories to detect leaks in hard to reach areas
	Rugged carrying case
	Meets ASTM standards

	Aplications
	Locates leaks in air, steam and non-flammable gas systems including pipes, fittings, valves, cylinders and pressure vessels
	Finds the source of bearing and gear wear
	Locates arcing in an electrical system
	Detects refrigeration and air conditioning system leaks
	Locates leaks in brake systems, tubes, tires and radiators
	Senses cracks in moving rubber v-belts
	Detects leaks in vacuum systems
	Check condition of engine seals