Post Buy Requirement
AI
Mumbai, Maharashtra, India
Add Review

Other Products / Services

Thermowells


Applications


Thermowells protect the stem or bulb of the thermometers from corrosive effects, pressure and viscosity of process fluids. It also allows removing of the temperature gauge for recalibration, repair purpose without disturbing the process.


Features


4Available in Straight Type, Taper Type, Flanged End Straight Type and Flanged End Taper Type

4Material SS316 or SS304 or Brass or other as required

43/8", , 3/4", 1" bsp or npt connection or other as required

or Flanged End Connection as per DIN, ASME, BS Standards

4Special coating/lining on thermowell of special material



View Complete Details

Mat Weaving Machine

The Mat Weaving Machine requires only 0.75 hp electricity and the mat pattern can be easily changed from carpet to chume & vice versa.
View Complete Details

BENCH PRESSURE CALIBRATORS

Key Features:



  • Long Life, Minimum Maintanence

  • Fast Pressure Generation

  • Minimum Force Required for Pressure Generation

  • Available in Many Ranges upto 1000 bar

  • Vaccum Testers also available

  • Portable Version of AH1-150 and AH1-400 for Site calibration

  • Available with Digital/Analog Master Gauges upto 0.05% Accuracy

  • High Volume Capacity for Testing 6"/10" gauges

  • Best for Lab Use

  • Most Parts made from Stainless Steel



When you are looking for Inhouse Pressure Calibration of Pressure Instruments ADARSH AH1/AH2 series Models are the ideal tool. They offer fast pressure generation and are ideal for operating for many years. These Bench Pressure Calibrator are suitable for Calibration and Testing of pressure gauges, pressure transmitters, pressure switches, valves. Different Models are available for Vacuum and Pressure upto 1000 kg/cm2 max. Models AH1-150 and AH1-400 can be customized to be offered in portable versions for on-site calibration. These comparison testers are hydraulic based and can be used with oil (preferred) or water.

View Complete Details

Pp Mat Weaving Machine

Capacity capable of producing 100 mats24 hours (for 36" width weaving machine)
The machine enables manufacturing of equal weight Mat products by adjusting warp yarn's tension with help of length adjusting device.
Center Selvedge Looms also offered of any size.
Special width of machines can be manufactured.
View Complete Details

Needle Valves

Applications


Needle Valves are used for flow control, isolation purpose, on /off applications. Suitable for pressure upto 400 kg/cm2 and higher.


Features


4Material SS316 or SS304

41/4", 3/8, bsp or npt connection

4Pressure Rated upto 400 kg/cm2 and higher
View Complete Details

Hand Pump Pressure Calibrators

Key Features:



  • Ideal for on-site pressure calibration

  • Available in different ranges upto 40 bar

  • Vaccum upto -0.9 bar on all models

  • Available with Digital/Analog Master Gauges upto 0.05% Accuracy

  • Very Light weight 750 gms only

  • No oil requried - All Models are Pneumatic operated


Handheld Pressure Calibrators are and ideal tool for checking & Calibration of Pneumatic Digital Indicators, Manometers, Pressure Transducers / Transmitters, Pneumatic Loops etc. Generates (Pneumatic) Pressure / Vacuum through convenient Scissor action / minimum effort, Fine Adjustment Vernier


Specifications:

Weight: Approx 750gms Only

Instrument Dimension (H x W x D) : 230 x 140 x 65 mm

Device Under Test Port : 1/4" (F) BSP

Master Instrument Port : 3/8 (F) BSP

Flexible Nylon Hose (1 Meter) with Swivel Adaptor to connect devices under test
View Complete Details

Pressure Indicators And Controllers

Pressure Indicator: Accepts 4-20mA frompressure transmitter& displays pressure.

Pressure Controller: Accepts 4-20mA from pressure transmitter, displays pressure and gives a relay o/p.


Specifications


43-1/2" Digit LED Display

4I/P 4-20 mA

4Works on 230V AC Mains

4Generates 24V DC supply

4Displays pressure upto 1000 bar

4Single relay or Double relay o/p (Controller Only)

View Complete Details

Gauge Savers

Applications


Also known as over pressure protectors are used to protect the pressure gauge from over pressure. The gauge saver has a predefined setpoint at which it will not allow any media to flow. The setpoint can be varied for a max span of 10% of set pressure. Available for set pressure ranges from 1000mmwc (0.1 kg/cm2) upto 600kg/cm2.


Features


4Material SS316

43/8, bsp or npt connection

4Suitable for Pressure Range from 1000mmwc upto 700 kg/cm2
View Complete Details

Pressure Transmitters




  • Low Cost - High Performace Model

  • +/- 0.25% upto 0.1% F.S. Accuracy

  • All Ranges from 1 bar upto 1000 bar / -1 to 0 /
    & -1x1, -1x3, -1x5, -1x6, -1x9, -1 to 10, -1 to 20 bar

  • Operating Temp upto +125 deg C

  • Available Ex-stock

  • MAKE : GEMS / MEAS / AST / PRIGNITZ







Application

Pressure Transmitter is widely used for industrial automation applications. The transmitters gives output of 4-20mA current signal which can be connected to a Controller / PLC for control/monitoring of pressure. We also offer customized solutions for applications like hygenic


View Complete Details

Syphons

The Siphon Tube is connected between the pressure gauge & process in applications where high temperature vapours or fluids are present or temperature above 65 Deg C for eg. steam. It acts as a cooling coil and protects the gauge from high temperature vapours, by dissipating heat. Agauge cockis generally connected between the pressure gauge and syphon for isolation.


Features


4Available in U type and Pigtial / Coil Type

4Material SS316 or SS304 or C.S.

41/4", 3/8, bsp or npt connection

View Complete Details

Pulsation Dampners

Application


Pulsation Dampners (Snubbers) are used with pressure gauges where sudden pressure shocks and fluctuations are present which cause the pointer to fluctuate rapidly hence making it difficult to take the gauge reading. Dampners considerably reduce pulsations and hence makes the gauge reading easier and also improves the life of the gauge.


Features


4Material SS316 or SS304 or Mild Steel (M.S.)

41/4", 3/8, bsp or npt connection

4Suitable for Pressure Range upto 700 kg/cm2
View Complete Details

Refrigeration Compressor Parts


  • Experience in Refrigeration Industry of over 30 years

  • Exporting compressor spares to over 35 countries worldwide

  • Product Availability - Ex- STOCK

  • Quality of products at par with OEM or better

  • Clientele includes leading customers in Fisheries/Sea Foods, Ice Plants, Cold Storages, Food, Dairy, Marine Industry, Pharma & Other Process Plants.



Compressor Parts are generally available Ex-stock for immediate deliveries for refigeration compressors like Sabroe, Grasso, Carrier, Bitzer, Bock, Stal, York, Frick, Trane, Mycom, Daikin, Gram, Vilter. The spares include connecting rods, crankshafts, valves, plates, piston and piston assembly, rings, pins, bush, suction valve and discharge valve, suction plates and springs, discharge plates and springs, oil pumps, shaft seal, cylinder liner, connecting rod bearings, main bearing, gasket sets, and many more.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Satish Desh Pande (Adarsh Industries)
  • No. 307, Shankala Industrial Estate, Gogatewadi, Off- Aarey,, Goregaon East, Mumbai, Maharashtra - 11111
  • Share us via