We are offering custom dial artworkoem logomaximum pointernon-standard mountings, connectionselectric contactsliquid fillingdifferent pressure scales kpa, mpa, psi, kgcm2, bar, mmhg, inhg, mmwcbrass case & ringfluroscent dialsload gauges as per ram diaor any special requirement you have.
Freon Pressure Gauges All pressure ranges are with temperature scales for R12 R22 R134a R502 R404a R134a freon gases. Available in both Standard and Stainless Steel Versions. Mounting: Bottom Direct or Bottom Surface or Back Direct or Back Panel or back Clamp.
Anti Vibration Pressure Gauge which are prone to heavy vibration. Many times the solution provided is to make a panel to isolate the gauge from vibration however in this case the gauge has to be distanced from the point where actual indication is required. However the Adarsh MXT Series makes it is easy to mount the gauge at the point of vibration itself.
Anti Pulsation Pressure Gauge is present. The new Adarsh APDS Series Anti Pulsation Pressure Gauge is designed for such applications where there is severe pulsation. The unique design dampens the pulsation and makes for a better pointer reading and at that same time enchances the life of the gauge. Further there is no need of glycerin filling which is prone to leakages.
Draft Gauge are used for low pressure measurement from ranges -25mmwc to 0 upto 6000mmwc. Brass or SS Capsule (sensing element), Fabricated Steel Stove Enameled Black Case.
Electric Contact Pressure Gauges are suggested where application is for control of pressure & for Audible or visible alarms. These gauges give electrical output which can be used to turn a motor onoff & similar applications. These gauges can be configured for a 1NO+1NC output or 1NO or 1NC or 2NO or 2NC output.
We are offering digital pressure gauges.Cannot measure pressure with fine precision by mechanical gauges, switch to digital pressure gauges from adarsh and measure pressure more accurately & precisely. Get accuracy upto six times more compared to analog gauges and high resolution with least count upto 0.001 kgcm2 bar. Ideal for laboratory use, pressure gauge calibration and applications requiring high accuracy, precision and repeatability.
LOW COST DIGITAL PRESSURE GAUGE Over Range Protection: 2X Rated Pressure, Burst Pressure: 5X or 20, 000 PSI whichever is less, Display: 0.6 LCD display and blue Backlight.
Duplex Gauges from two lines can be measured on a single pressure gauge. One black pointer indicates pressure of one line and red pointer indicates pressure of other line. The gauges are glycerin filled for optimum use.Bottom Direct Mount, Bottom Panel Mount, Bottom Surface Mount.
Capsule Gauges are suitable for measuring low pressure of gases from ranges 400mmwc to 6000mmwc. (40mbar to 600mbar). Measurement of Low Pressure of Gaseous Media eg. Burner Monitoring, Gas Production, Medical Applications, etc
Process Gauges Solid Front Design with Full Blow Out Back, Polypropylene Case and Ring, Dry or Liquid Filled (Glycerin or Silicon). Bottom Direct Mount with 3 hole for fixing.
HIGH ACCURACY DIGITAL PRESSURE GAUGE High Accuracy, High Resolution, High Precision, Selectable Units: kgcm2, bar, psi, mmhg, mmwc, kpa, mbar. Accessories: Pulsation Dampner, Syphons, Diaphragm Seals, Gauge Cocks, Gauge Savers.
Sanitary Triclover Pressure Gauges These Gauges have End Connection with Triclover fitting . These gauges are used in Food Dairy Pharma Beverage Industries. Electric Contacts 1N0+1NC or 2No or 2NC.
Schaffer Diaphragm Gauges have a Diaphragm whos displacement is transferred via a link to the movement. They are suitable for low pressure measurement from 0 -400mmwc to 6000mmwc and high side from 0-1 kgcm2 to 0-25 kgcm2. Schaffer Gauges are suitable for Pharmaceutical, Chemical, Petrochemical, Oil & Gas, Refinery, Paper & Pulp, Sugar, Breweries, Food & Beverages, Cement Industries, etc
Test & Master Gauges are used in laboratories, pressure gauge calibration, instrument testing and other applications where accuracy and repeatability is important. Available in 0.5% and 0.25% F.S. Accuracy.High Precision Brass Movement SS316 Movement.
Load Pressure Gauges are available in bottom or back mounting. Scales in KN, N, Tons. Used to measure load in compression cube and hydraulic machines. Bottom Direct, Bottom Surface, Back Direct, Back Panel, Back Clamp Mounting.
Digital Temperature Gauge Digital Temperature Gauges with LCD display, Highly Accurate, Ranges : -150 upto 600 deg C with RTD & -50 to 1100 with K Type Thermocouple. +- 1% FS +- 1 digit, 0.1 deg C resolution upto 199.9 deg C
Sealed Diaphragm Pressure Gauges Special Diaphragm Material like Tantalum, Hastealloy-C, etc. Teflon Coating Lining on Diaphragm and wetted parts. Electric Contacts 1N0+1NC and others.
Homogenizer Pressure Gauge it is a hygenic application diaphragm seal is used. Further the presence of continuous pulsating media and that too at High Pressure causes failure of ordinary diaphragm gauges. At Adarsh a diaphragm seal has been specially designed to sustain this high pressure pulsation and vibration. Available upto ranges 700 kgcm2, bar 10000 psi.
SS Case-Brass Internals Gauges are not corrosive to brass but require SS Case for external corrosion protection where Mild Steel Case is not suitable.Brass Working Parts - Bourdon, Socket & Movement.
Ammonia Pressure Gauges are specially designed to sustain against vibration, sudden pressure and temperature conditions. Ammonia gauge are used to measure suction and discharge pressure on Ammonia compressors.
Standard Pressure Gauges are suitable for general purpose applications for gas and liquid media which do not corrode brass & having an environment which is not harsh to Mild Steel Case. Commonly used on equipments like pumps, compressors, boliers, pnneumatic and hydraulic machines etc.
Mud Pressure Gauge are used in Oil Industry for slush pump service, portable core drills, for use on gathering lines, etc.Sealing Diaphragm: The measuring system is totally sealed from thick fluid by means of long life flexible anti corrosive cup diaphragm.
Sanitary SMS Pressure Gauges These Gauges have End Connection with SMS or DIN or RTJ or IDF . These gauges are used in Food Dairy Pharma Beverage Industries.Glycerin or Silicon Filled, Bottom or Back Mounted,
We are offering liquid filled gauges are generally used for applications where vibration & pulsating media is a factor. Vibration leads to wear and tear of internal parts and causes the gauge to damage and an unsteady pointer reading. Glycerin or silicon filling smoothens the movement of internal gears & parts and also reduces the fluterring of pointer to give a steady reading. These gauges are available with either brass internals or ss internals.
Gauge Cocks Gauge Cocks are used for flow control like simple onoff, isolation applications. Suitable for pressure upto 30 kgcm2. 38, bsp or npt connection
Availalble in dial sizes 2-12", 4" & 6"Back, Bottom or All-Angle (Every Angle) TypeComplete Stainless Steel ConstructionDry or Liquid Filled (Glycerin or Silicon)Any standard thread connectionRanges from -40 to +500 deg C
Liquid Filled Gauges Vibration leads to wear and tear of internal parts and causes the gauge to damage and an unsteady pointer reading. Glycerin or Silicon filling smoothens the movement of internal gears & parts and also reduces the fluterring of pointer to give a steady reading. These gauges are available with either brass internals or ss internals.