Mud Gauges are used in Oil Industry for slush pump service, portable core drills, for use on gathering lines, etc. Specifications 4 100mm (4”) and 150mm (6”) Dial Size 4 Range 0-60, 100, 160, 250, 400, 600, 1000 kgcm2 or bar 4 Bottom Direct Mounting 4 SS316 Bourdon Tube, SS304 Movement 4 Built in Damper with Fine external adjustment 4 ±1% F.S. Accuracy 4 Sealing Diaphragm: The measuring system is totally sealed from thick fluid by means of long life flexible anti corrosive cup diaphragm 4 Bronze Case, Chromium Plated and Stub Material SS316 4 Gauge Cover Acrylic Shatterproof 4 Glycerin Filled

Gauge Cocks are used for flow control like simple onoff, isolation applications. Suitable for pressure upto 30 kgcm2. Available in 2 way 3way type 4 Material SS316 or SS304 or Brass 4 38”, ½” bsp or npt connection

The Siphon Tube is connected between the pressure gauge & process in applications where high temperature vapours or fluids are present or temperature above 65 Deg C for eg. steam. It acts as a cooling coil and protects the gauge from high temperature vapours, by dissipating heat. A gauge cock is generally connected between the pressure gauge and syphon for isolation.U Type Siphons are Suitable for Veritcal Pipe Mounting Coil Pigtail Siphons are Suitable for Horizontal Pipe Mounting

We are leading manufacturer, exporter and stockist of ADARSH pressure gauges, diaphragm gauges, pressure calibrators, digital pressure gauges, bimetal temperature gauges, gas filled thermometers, industrial thermometers, temperature calibrators, temperature bath, gauge accessories like syphon, gauge saver, gauge cock, pulsation dampner, needle valves, manifolds, thermowells cooling adaptor etc Specifications Straight or 90 deg Type Upper Aluminium Anodized Body 4”, 6 or 8” Alcohol (Red or Blue) or Mercury Filled Brass or SS Stem Stem Length as required Stem Length: 63mm, 100mm, 125mm or custom length Stem Diameter: 38" (9.5mm) or 10mm or 12mm or as required ½” bsp or npt connection or other as required All Sd Ranges from -60 to 600 deg C Units: Centigrade, Fahrenheit and dual scales CF Thermowell (Pocket) Available Optionally

• Dial Size63mm

ADARSH Freon Pressure Gauges are widely used in Refrigeration Plants and Commercial Refrigeration Applications. Available in both Standard and Stainless Steel Versions, Mounting: Bottom Direct, Bottom Surface, Back Direct, Back Panel, Back Clamp

Electric contact pressure gauges are suggested where application is for control of pressure & for Audible or visible alarms. These gauges give electrical output which can be used to turn a motor onoff & similar applications. These gauges can be configured for a 1NO+1NC output or 1NO or 1NC or 2NO or 2NC output. Specifications 4 Available in 4" (100mm) and 6" (150mm) Dial Sizes 4 Contacts: 1NO+1NC, 1NO, 1NC, 2NO, 2NC, 2NO+2NC 4 Contact Rating: 230V, 100mA 4 SS316 Bourdon and Socket, SS304 Movement 4 Stainless Steel SS304 Case and Ring IP65 4 38”, ½” bsp or npt connection 4 Mounting: Bottom Direct, Bottom Surface, Back Direct, Back Panel, Back Clamp Mounting

ADARSH PRESSURE CALIBRATORS ARE IDEAL FOR PRESSURE GAUGE CALIBRATION & TESTING. CHOOSE THE BEST PRESSURE CALIBRATORS AVAILABLE IN THE MARKET ALL WITH NEW DESIGN & FEATURES. OUR CONTINUOUS R&D HAS LED US WITH SO MANY OPTIONS TO CHOOSE FROM. ALL MODELS ARE AVAILABLE WITH ANALOG OR DIGITAL GAUGES.

Draft Gauges are used for low pressure measurement from ranges -25mmwc to 0 upto 6000mmwc Rectangle Size: 150 x 78 mm & 200 x 104 mm Vertical or horizontal Dial Orientation Brass or SS Capsule (sensing element) Fabricated Steel Stove Enameled Black Case Connection ¼” bsp (M) or as required Flush Panel Back Entry Range: 0 to 25mmwc upto 6000mmwc Compound ranges: -25 to + 25mmwc upto -300 to +300mmwc

Adarsh Ammonia Gauges are specially designed to sustain against vibration, sudden pressure and temperature conditions. Ammonia gauge are used to measure suction and discharge pressure on Ammonia compressors.

Test Master Gauges are used in laboratories, pressure gauge calibration, instrument testing and other applications where accuracy and repeatability is important. Available in ±0.5% and ±0.25% F.S. Accuracy.

Liquid filled gauges are generally used for applications where vibration & pulsating media is a factor. Vibration leads to wear and tear of internal parts and causes the gauge to damage and an unsteady pointer reading. Glycerin or Silicon filling smoothens the movement of internal gears & parts and also reduces the fluterring of pointer to give a steady reading. These gauges are available with either brass internals or ss internals.

Electric contact pressure gauges are suggested where application is for control of pressure & for Audible or visible alarms. These gauges give electrical output which can be used to turn a motor onoff & similar applications. These gauges can be configured for a 1NO+1NC output or 1NO or 1NC or 2NO or 2NC output.