Post Buy Requirement
AL
Bangalore, Karnataka, India
Add Review

Our Products

  1. Grinding Mill 3 Products available
  2. Laboratory Equipments 20 Products available
  3. Homogenizer 4 Products available
  4. Fungicide 3 Products available
  5. Elemental Analyzer 4 Products available
  6. Spectrophotometers 4 Products available
  7. Kitchenware And Cookware 7 Products available
  8. Microscope 8 Products available
  9. Others 50 Products available

Other Products / Services #4533023

MULTISAMPLE ROBOTIC

  • Generator Probes: Generator Probes: 7mm diameter
  • Power Rating: 150 watt
The innovative Omni Prep Multi-Sample Laboratory Homogenizer is specifically designed to streamline the labor and time intensive homogenization process and to make it more comfortable for the user. The Omni Prep features our new Whisper Drive Technology a brushless motor that is virtually maintenance free, is ultra quiet during operation, and uses about 10% of the power required to process 6 samples individually. Unlike brush motors, since the motor holds its processing speed to +- 1% accuracy throughout the homogenization cycle, Whisper Drive Technology guarantees accuracy and repeatability regardless of fluctuations in sample size or sample viscosity.
View Complete Details

FoodALYT GmbH Steam Distillation Units

The Steam Distillation Units FoodALYT D are real all-rounders in sample preparation. With these devices, proteins, nitrate, nitrite, ammonia, volatile acids, ethanol, formaldehyde etc. can be measured in different samples. A typical field of application is the treatment of subsequent Kjeldahl digestion by distilling ammonia in an acid receiver. Furthermore, volatile preservatives in canned fish or meat salads are distilled to subsequently carry out a photometric determination. Steam distillation is also used to separate alcohols in spirits (e. g. egg or cream liqueurs) for later quantitative analysis.
View Complete Details

Kakuhunter

Our unique lighting technique enables high precision measurement.Overlapping colonies can be measured separately.Different types of colonies can be measured separately by using different colors.Equipped with 2 measurement modes: simple and standard.The measurement target range with regard to colony size can be set freely.Saved images can be re-measured any time.Depending on the type of colony, the optimal method of monochrome conversion can be selected from four different options.Counting can be manually adjusted to either plus or minus.Data can be transferred to a spreadsheet.
View Complete Details

Dry Heat Sterilizer

  • Controller JSC-0D Digital PID Controller ±0.1 oC Digital PID Controller with LED Display Automatic START/STOP timer
Dry Heat Sterilizer is a common instrument to be used to drying, heating and sterilizing objects by heating air up to 160 oC or 180 oC with gravity or forced convection system during specified sterilizing exposure time range from 30 to 60 minutes of sterilization exposure time
View Complete Details

Safety Cabinet

  • Safety UV Lamp CUT-OFF In case of fluorescent lamp turned on TOTAL USING TIME LOG
Cabinet enclosure designed Class II Type A2 provides personnel, product and environmentalprotection from hazardous particles such as bacteria, viruses and genetically manipulatedmaterials such as nucleic acids that require Biosafety Level 1, 2 or 3 containments.
View Complete Details

Ice Flaker Machine

  • Production Capacity 90 Kg / 24 Hrs
The new granular Ice producers have some electronics components to examine all the set functions.The ice exit through infra-red rays sounds which stops the machine when the deposit Is full and the ice stagnant in the exhaust opening.The partial or total lack of refrigerant in the refrigerating circuit. The set operating is stopped and air-raid warning light starts.The granular ice producers have been projected and built with a high qualitative standard. They satisfy the severe qualitative standard that we impose but they have also obtained the pass recognition from VDE, the most important European homologation organization for the electromechanic equipment.
View Complete Details

Convection Ovens

  • Safety DOOR SENSOR : Non-contact magnetic door switch cut-off heater and blower when door opened SENSOR DISCONNECTION ALAR
JSOF-Series Forced Convection Ovens utilize a motorized fan to force air circulates across heating element to supply hot air into the chamber.The fan allows more consistent temperature distribution of the chamber for applications in which good temperature uniformity or faster heat up and short drying time are needed.JSOF-Series Natural Convection Ovens heat up chamber with mild gravity air convection with heating element located under the chamber. Ideal for general and conventional laboratory drying purpose
View Complete Details

Ultrasonic Cell Disruptors

  • Power Rating: 400 watts
  • Output Frequency: 20 kHz
Ultrasonic Homogenizers are recommended for homogenization and lysis of laboratory samples that do not require traditional grinding or rotor-stator cutting techniques for processing. Small and large ultrasonic probes are available to allow for a variety of sample volumes to be processed. Ultrasonic probes are made of chemical resistant solid titanium. A solid probe allows for less chance of sample loss and cross-contamination between samples.
View Complete Details

Block Heater

  • Controller JSC-2D Digital PID Controller ±0.1 oC Digital PID Controller Automatic START/STOP timer
JSAT-Series Autoclave, Steam Sterilizer is an innovative replacement of conventional laboratory autoclave by providingreliable performance, up-to-dated design and safety door inter-lock system integrated with temperature and pressure for perfect user safety.
View Complete Details

Bath Circulator

  • Safety DUAL OVER TEMP. CUT-OFF Digital system cut-off heater and AUDIO VISUAL ALARM in case +2 oC above set temperature
Heated circulating open bath system controls temperature range from ambient +5 oC to 99 oC with internal and external circulation pump. Internal circulation allows precise thermal uniformity within 0.1 oC comparing to the conventional heated bath without circulation pump.
View Complete Details

Coin Cell Parts For 2032

Cases, Gaskets, Caps, Wave Washer, 16mm Spacers are available Cap - sus316lwave washer sus316LSpacer(t= 0.5mm) sus316lCase sus316LPP gasket- hard pp
View Complete Details

Auto Film Coater

  • stroke 330 approx
  • power supply Ac 100 v
This equipment is used to automatically apply link paint adhesive and emulsion resin to paper.film and metal, using a film applicator such as baker applicator doctor blade bar coater and film applicator eqipped with a micrometer.
View Complete Details

PT 100 Rotary Sample Divider

  • Feed size < 10 mm
Sample dividers are essential for the exact and representative division of pourable bulk goods in the laboratory. The Rotary Sample Divider PT 100 uses the most exact division method which produces the smallest qualitative varia- tions. In addition to the PT 200, which divides larger amounts up to 30 l per run, RETSCH offer the sample splitter RT for manual division
View Complete Details

Glove Box

  • Feature Modular glove box for research, education and industry Integrated gas purification system for cleanliness better than 1ppm O2 and H2O
GS Inert Gas Glove boxGlove box with Deep Freezer CabinetGlove box System with Vapour Deposition ChamberGlove box with microscope and spin coaterOLED Glove box SystemGS custom-built Glove boxes
View Complete Details

Microwave Digester

The RAPID wave Eco Microwave Digestion System is a basic model which possesses dual temperature and pressure control directly via specific sensors assembly, high performance vessels and enhanced protection door, meeting the application in the high pressure range. The RAPID wave Eco System is designed for beginners who want to change from the traditional digestion methods to Microwave Digestion.
View Complete Details

Gel Documentation System

  • Size 4.65 µm x 4.65 µm
Gel documentation system Professional quality images to suit for publication and routine imaging or diagnostic needs. Easy placing of gels and easy maintenance.Professional quality images to suit for publication and routine imaging or diagnostic needs. Easy placing of gels and easy maintenance.
View Complete Details

Block Heater

Temp. Range : ambient +5 150Controller : Digital PID ControllerAccuracy : 0.2 at 60Blocks : Aluminum, InterchangeableCapacity : 1 2 4 Blocks Up to 150, 0.2 accuracy and 0.2 niformity Digital PID Controller enables 0.1 resolution Over Temperature
View Complete Details

Chemiluminescence Analyzers

  • Temperature Δ-28⁰C
Chemiluminescence analyzers Fast, simple and clear imaging compared to film based.The lockable screws in lens are used for focusing any size of blots and gels.Wide range of filters to choose with.Adjustable and repeatable height positions for trays to keep blots.
View Complete Details

2nm Basic Single Beam

  • Light path 10mm-100mm
  • Spectral bandwidth 2nm
Kinetic analysis - Measurement with time-scanning.Multiple wavelength analysis - Measurement with many wavelengthesDNAProtein analysis - Automatic calculation of the nucleic acid puritySoftware functions - Validation (GLPGMP) and a lot of other functions
View Complete Details

Photometric Analyzer

  • Photometric range 0-125.0%T, 0-1.999A
  • Size 415(W)×315(D)×155 (H) mm
Photometric analyzerSP-VIS100 is an ideal Visible Spectrophotometer for routine Analysis at teaching in Schools, Colleges and Universities. It can also be used for simple sample analysis for a lot of different type of samples where the sample throughput is low and no automation is required.
View Complete Details

Button Punch Tool

  • Dimensions 125(W) x 150(D) x 195(H)mm
Button punch tool This equipment is able to punch lithium metal foils. Punching dies will be manufactured upon request,
View Complete Details

Rotary Evaporator

  • Temperature Range Digital Control Max. 90°C (180 DEGREES OPTIONAL)
  • Total Power 810w voltage- 1.5KW Voltage : 220v/50Hz
ADITYA rotary evaporators are forming the ideal basis for efficient evaporation in your laboratory. They are suitable for standard distillation, for complex distilling processes as well as for automatic distillation.Aspects such as safety, convenience and cost savings have been considerably taken into account during the development of the evaporators. This is reflected in various unique product advantages. Among others all evaporators are equipped with a separate ONOFF switch for the heating function. It is also provided with easy lift a simple touch operation to lift flaskWith the rotary evaporators you can as well compose your individual modular concept, consisting of rotary evaporator, vacuum pump and chiller.
View Complete Details

Evaporator Pumps

  • Temperature Range 90°C
  • Rotating Speed 20-180 rpm/20-280 rpm
Aspects such as safety, convenience and cost savings have been considerably taken into account during the development of the evaporators. This is reflected in various unique product advantages. Among others all evaporators are equipped with a separate ONOFF switch for the heating function. It is also provided with easy lift a simple touch operation to lift flask, With the rotary evaporators you can as well compose your individual modular concept, consisting of rotary evaporator, vacuum pump and chiller.
View Complete Details

Rotary Evaporators

  • Temperature Range 90°C (180 DEGREES OPTIONAL)
  • Total Power 810w voltage- 1.5KW Voltage : 220v/50Hz
rotary evaporators are forming the ideal basis for efficient evaporation in your laboratory. They are suitable for standard distillation, for complex distilling processes as well as for automatic distillation.Aspects such as safety, convenience and cost savings have been considerably taken into account during the development of the evaporators. This is reflected in various unique product advantages. Among others all evaporators are equipped with a separate ONOFF switch for the heating function. It is also provided with easy lift a simple touch operation to lift flask, With the rotary evaporators you can as well compose your individual modular concept, consisting of rotary evaporator, vacuum pump and chiller.
View Complete Details

Eager Corporation Coin Cell Crimper

  • Material SUS304
  • Wieght 12kg
  • Push out pin To push outthe work with pin
This equipment is used to clamp coin cells for sealing the cellsHigh accurate molds will guarantee almost 100% perfect sealing
View Complete Details

Coin Cell Crimper

  • Wieght 12kg
  • Standard Work 2032, 2016 as required
This equipment is used to clamp coin cells for sealing the cellsHigh accurate molds will guarantee almost 100% perfect sealing
View Complete Details

Automatic Coin Cell Crimper

  • Dimensions 185(W) x 245(D) x 300(H)mm
  • Weight Approx. 17kg
This equipment is a coin cell crimper operated by electricityIt has the same accuracy as the hand operated crimper.
View Complete Details

SP-AA 3000 Flame AAS Spectrometer

  • Wavelength accuracy ±0.2 nm
Spectrum Instruments improve the optical precision, linear range and background correction effectively. SP-AA 3000 is an external computer controlled AAS equipped with 8-lamp positions, automatic gas control and automatic burner height setting.
View Complete Details

Magnetic Stirrer

HS2 magnetic stirrers are highly chemical resistant to acid, alkali and oil. Ideal for all types of laboratory stirring and heating applications. High level of safety thanks to the improved heat control technology. These stirrers give high level of reliability even at low speed and high temperatures. The stirring speed is controlled by electronic circuit and temperature is controlled by closed loop thermostat control.
View Complete Details

Upright Freezer

  • Capacity 191
  • Dimensions 1280x790x1030
Upright freezer Efficient evaporator with maximum contact with walls for fast cooling 130 mm high pressure foamed polyurethane insulation, Standard epoxy coated steel interior, stainless steel interior optional, Upright models with very user friendly control panel on eye level, Reliable hot gas heated door seals prevents ice build up, Dry contacts for remote alarm and RS232 for remote monitoring are standard.
View Complete Details

Vacuum Pump

  • Overall Weight 11.1 kg
  • Performance Features Outstanding chemical resistance and superior vapor tolerance High performance even at low vacuum levels Optimized vacuum even with gas ballast
Chemistry-design diaphragm pumps are an excellent solution for continuous, oil-free pumping of corrosive gases and vaporsChemically resistant eco friendly diaphragm pumps are resistant to aggressive solvents and acidic vapors.The two-stage construction provides the advantageous combination of high pumping speed and low ultimate vacuum. The diaphragms and gas contacting parts consist of PTFE, PTFE Compounds, and ceramic compounds. Well-proven PTFE sandwich diaphragms are used for increased reliability and extended operating life. The vacuum processes run more effective and is reproducible. The additional pressure reduction allows the distillation of gas mixtures almost automatically and without fractionated operation. This pump is our first and most popular chemistry diaphragm pump, and is the heart of ADITYA pumping systems. The new indigenous pump features further improved performance data and superior vapor tolerance
View Complete Details

Recirculation Chiller

  • Performance features Right solution for all requirement Cooling temperature and pressure always constant Avoid leakages
  • RT Advantages LED display Smart cool logic Independent cooling cycle High reliability
The circulation chiller was especially designed for simple thermostating tasks below 0 C. Thanks to its extremely compact construction and small footprint it fits anywhere. The temperature range of the RT 08025 is from -30 C up to 20 C with a temperature stability of 0.5 C. The compact circulation chillers RT 08025 and RTH 08025 have different operating temperature range.
View Complete Details

Homogenizer Kits

  • Power Rating: 125 watt
  • Dimensions: 16cm(6.5in) height, 5.1cm(2in) diameter.
Omni Tip Homogenizing Kits include everything you need to homogenize. These kits can be used to process sample sizes from 0.25mL to 30mL with Omni Tips &
View Complete Details

Mortar Grinders

  • Feed size* < 8 mm
  • Final fineness* < 10 um
The RM 200 is the latest generation of the classic RETSCH Mill which replaced manual mortars and pestles more than 80 years ago. It is widely used for reproducible sample preparation in R&D, materials testing and especially in pharmaceutics and homeopathy. Many different materials can be easily and efficiently processed in wet or dry condition. The grinding sets of the RM 200 can be selected out of 7 different materials which allows for neutral-to-analysis sample preparation. The new generation of mortar grinders is exceptionally powerful, safe and easy to operate.
View Complete Details

Mortar Grinder RM 200

  • Feed size* < 8 mm
  • Final fineness* < 10 um
The RM 200 is the latest generation of the classic RETSCH Mill which replaced manual mortars and pestles more than 80 years ago. It is widely used for reproducible sample preparation in R&D, materials testing and especially in pharmaceutics and homeopathy. Many different materials can be easily and efficiently processed in wet or dry condition. The grinding sets of the RM 200 can be selected out of 7 different materials which allows for neutral-to-analysis sample preparation. The new generation of mortar grinders is exceptionally powerful, safe and easy to operate.
View Complete Details

Glove Boxes

Modular glove box for research, education and industry, Integrated gas purification system for cleanliness better than 1ppm O2 and H2O, High safety standard and convenient operation, Stainless steel and safety glass structure materials, Front panel made from laminated safety glass (LSG) Sidewalls with O-ring gasket without any adhesives for reversible dismounting and remounting Safety- and Comfort Valve passive device for limiting differential pressure in the glove box even in case of power failure, pressure control in the glove box without use of vacuum pump for low-noise operation and minimized energy consumption Big automated antechamber.
View Complete Details

CAMSIZER Laboratory Instrument

  • Measuring range 30 um - 30 mm
  • Measurements 60 images / sec
The CAMSIZER is a compact laboratory instrument for simultaneous measurement of particle size distribution and particle shape of powders and granules. Based on digital image processing by the unique, patented two-camera system pourable solids in a range from 30 m to 30 mm can be measured. Thanks to the unique scanning of all particles and the newly developed fitting algorithms, measuring results are 100% compatible to those of sieve analysis. This makes the CAMSIZER the ideal time- and cost-saving alternative to sieving. Digital image processing with patented two-camera-system(acc. to ISO 13322-2)Simultaneous analysis of particle size, shape, number and densityVery short measuring time (2-3 min.)
View Complete Details

Carbon Water CW-800

Measured elements: carbon dioxide, waterFurnace alignment: horizontalSample carrier: quartz boatsApplications: cement, gypsum, limestone, minerals, ores, soil, .Furnace: resistance furnace with quartz tube, adjustable up to 1000 0CDetection method: solid state infrared absorptionNumber of IR cells: 1 - 2
View Complete Details

Carbon Water (CW) CW-800M

Measured elements: carbon dioxide, waterFurnace alignment: horizontalSample carrier: quartz boatsApplications: cement, gypsum, limestone, minerals, ores, slag, soil, wasteFurnace: resistance furnace with quartz tube, adjustable up to 1000 0CCatalyst furnace: +Detection method: solid state infrared absorptionNumber of IR cells: 1 - 2
View Complete Details

Surface Carbon - SurfaceC-800

Measured elements: carbonSamples: inorganicFurnace alignment: horizontalSample carrier: quartz boatsApplications: Aluminum, ceramics, metals, surfacecarbon on steelFurnace: resistance furnace with quartz tube, adjustable up to 1000 0CNumber of IR cells: 1 - 2
View Complete Details

ONH-2000 Analyzers

Measured elements: hydrogen, nitrogen, oxygenSamples: inorganicFurnace alignment: verticalSample carrier: graphite cruciblesApplications: alloys, cast iron, ceramics, copper, refractory metals, steel, .Furnace: electrode impulse furnace (max. 8 KW), temperatures in excess of 3000 CDetection method: solid state infrared absorption for oxygen thermal conductivity for nitrogen and hydrogen
View Complete Details

H-500 Oxygen Nitrogen Hydrogen Analyzers

Measured elements: hydrogenSamples: metals, steelFurnace alignment: horizontal tilting function Sample carrier: .Applications: alloys, copper, steel, .Furnace: resistance furnace with quartz tube, adjustable up to 1000 C (operating temperature 900 - 1000 C)Detection method: thermal conductivity
View Complete Details

Thermogravimetric Analyzer

Measured elements: ash content, moisture, volatilesSamples: inorganic, organic, syntheticApplications: coal, coke, food, limestone, plasticsFurnace: resistance heated ceramic furnace, programmable in 1 C steps from 50 C up to 1000 C Detection method: balanceMax. number of samples: 19 crucibles + 1 reference crucible
View Complete Details

Nexius Zoom

Bino- or trinocular heads with 45 inclined tubesBoth eyepieces with 5 diopter adjustmentsInterpupillary distance adjustable between 54 mm and 75 mm Objective :Zoom 1:6.7 objective with 0.67x to 4.5x magnificationsField of view from 33 mm to 4.9 mmWorking distance 110 mmAuxiliary 0.5x 0.75x 1.5x and 2.0x lenses availableAll optical parts are anti-fungus treated Stands:Ergonomically designed pillar or rack and pinion or Universal stand with LED illumination and 2 object clampsErgonomically designed universal one arm or double arm stands without illuminationAlloy metal cast, hardened off-white painted
View Complete Details

Grindomi X Knife Mills Set

  • Feed size* < 40 mm / < 130 mm
  • Feed material soft, medium - hard, tough, elastic, high water, oil or fat content, dry
The Grindomi x Knife Mills set new standards in food sample preparation. The cutting effect produced by the steel blades in conjunction with the patented gravity lid results in the size reduction and perfect homogenization of samples high in water or oil content. It is possible to take a random, yet representative subsample from any location in the grinding chamber and still obtain a meaningful analysis result.
View Complete Details

BB 100 Jaw Crushers

  • feature Powerful size reduction with high throughput high final fineness (down to d90 < 2 mm)
The powerful RETSCH Jaw Crushers are designed for the rapid, gentle coarse and primary crushing of hard, brittle and tough materials. The breaking jaws are available in a variety of materials which include heavy-metal-free steel. Their efficiency and safety makes these pulverizers ideal for sample preparation in laboratories and industrial plants. Four basic models are available: from the compact bench-top model BB 50 to the biggest floor model, BB 300 which allows for feed sizes up to 130 mm. RETSCH jaw crushers combine increased operating convenience with maximum working safety.
View Complete Details

Sieve Shaker

  • Max. batch / feed capacity 3 kg
  • Suitable sieve diameters 100 mm to 200 mm / 8"
The AS 200 control is designed for sieves with a diameter up to 203 mm (8). It covers a measuring range from 20 m to 25 mm. The AS 200 control offers a decisive advantage: Instead of the vibration height, the sieve acceleration, which is independent of the power frequency, can be set. Thus, comparable and reproducible sieving results world-wide are guaranteed. The AS 200 is also available as basic version with analogue parameter setting and as digit version with digital time control and interval operation.
View Complete Details

Sieve Shaker Machine

  • Suitable sieve diameters 100 mm to 200 mm / 8"
  • capacity 3 kg
The AS 200 control is designed for sieves with a diameter up to 203 mm (8). It covers a measuring range from 20 m to 25 mm. The AS 200 control offers a decisive advantage: Instead of the vibration height, the sieve acceleration, which is independent of the power frequency, can be set. Thus, comparable and reproducible sieving results world-wide are guaranteed. The AS 200 is also available as basic version with analogue parameter setting and as digit version with digital time control and interval operation.
View Complete Details

Sieve Shakers

  • feature Sieving with 3-d effect For dry and wet sieving 9 parameter combinations can be stored All-digital controls
RETSCH analytical sieve shakers are used in research and development, quality control and production monitoring. The patented electromagnetic drive of the sieve shakers AS 200 control, AS 300 control and AS 450 control produces a 3-D throwing motion which ensures opti- mum use of the open sieve area and lets the sample move equally over the whole sieving surface. These instruments feature digital amplitude adjustment which allows for sharp fractionizing of the sample even after very short sieving times. All sieve shakers of the series control come with an inspection certificate and can be calibrated. They are suitable as measuring instruments according to DIN EN ISO 9000 ff.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Jagadish Sheregar (Adi Labtech)
  • No. 29, Adigiri, 1st Cross, Micolayout, Mahalakshmipuram, Bangalore, Karnataka - 560086, India
  • Share us via