Adishwar Tele-Networks

Chamrajpet, Bangalore, Karnataka

Warning Mesh are layed underground over Fiber Optic Cable, Power Cable, ducts and other type of pipe lines as a protective measures and helps in protection of your asset from any damage. Adiswhar Tele Networks is into manufacturing of various types of warning mesh as per customer requirement. We have variety of mesh from 50 microns to 350 microns, customizable as per your requirement.

Air Lock - End Plug are used to block HDPE, DWC, PVC pipe at one end and protect dust, water and chemical from entering into duct. It is simple, fast and easy to install. Use of end plug, make it easy to blow cable even after years of installation Features

• UV Stabilized
• Anti Corrosion Material
• Resistant to most of chemical
• Prevent dust, water and other chemical from entering into duct
• Easy to install and can be used multiple times
• Easy to lock
• Air and water tight

Size Available

• 32 mm
• 40 mm
• 50 mm
• 100 mm
• 110 mm

End Cap are used to temporarily lock duct and protect air , water from entering into duct. Features

• UV Stabilized
• Anti Corrosion Material
• Resistant to most of chemical
• Easy to install and can be used multiple times
• Easy to lock

Size Available

• 32 mm
• 40 mm
• 50 mm
• 100 mm
• 110 mm

Jack & Axel

Jack and Axel are used to coil and De-Coil cable drums. Adiswhar’s Jack and Axel have the capacity to withstand the payload of upto 1, 000 kg. Its uniquque design makes it very continent to use.   Features

• Easy to rise and lower
• Bearing fitted shaft make it easy to rotate most heavy drums
• Compact design and easy transport

Warning tapes are layed underground over Fiber Optic Cable, Power Cable, ducts and other type of pipe lines as a protective measures and helps in protection of your asset from any damage. Adiswhar Tele Networks is into manufacturing of various types of warning tape as per customer requirement. We have variety of tape from 50 microns to 350 microns, customizable as per your requirement.

Split Coupler is used while blowing of Optic Fiber Cable. It can be splited into 2 pieces, hence make it possibe to re-use it every time you do cable blowing.

Features

• High Quality
• Air tight lock
• Faster and easy to install
• Re Usable
• Hardened material, make it highly durable
• Resistant to most of chemical

Size Available

• 32 mm
• 38 mm
• 40 mm
• 50 mm

Duct Integrity Test - DIT Tool by Adishwar is used to check the quality of duct before cable blowing. With D.I.T make it easy to clear duct blockages and carry our pressure test. DIT tools is available in various duct combination, this make it easy to perform D.I.T in multiple duct simultaneously. This saves on cost of fuel, labor and time

• 1 Duct
• 2 Duct
• 4 Duct
• 7 Duct

Features

• Compact and easy to carry
• light weight
• Calibrated pressure gauge
• Easy to use

FibRod - Traceable FRP Duct Rodder is a high quality cable pulling equipment manufactured by Adishwar. FibRod - Traceable consist of copper rod in it core, making it tracible even when its underground. Its unique engineering makes it very strong and work under extreme climatic condition. It's flexibility along with strength make it travel through most complex ducting. FibRod - Traceable Duct Rodder helps in tracing of already layed underground duct and clearing blockages. FibRod - Traceable Duct Rodder also helps in analyzing the depth of duct and its path. It is most ideal equipment to use when duct path is unknown, duct is blocked or trench is old. Application

• Telecom Cable
  • Fiber optic Cable,
  • CORD Cable
  • Networking Cable
• Power Cable
• Other type of cable

Features

• Easy to install
• Locate old ducting and trench
• High tensile strength
• Tracible with copper in core
• Flexible, but strong
• Compact design makes it easy to carry
• Tough and strong body
• Resistance to acid, rust, alkaline
• Light weight

Air Lock - HDPE Duct Push Fit Coupler are used to join 2 HDPE Duct. With Push - Fit mechanism it is easy to install coupler without use of any additional tool. With high pressure sustainability, it is perfectly suitable to perform Duct Integrity Test (DIT) with pressure upto 12kg Features

• UV Stabilized
• Anti Corrosion Material
• Resistant to most of chemical
• Prevent Air and Water leakage
• Push - Fit mechanism make it easier and faster to install

Size Available

• 32mm
• 40mm
• 50mm

Air Lock - HDPE Duct Push Fit Coupler are used to join 2 HDPE Duct. With Push - Fit mechanism it is easy to install coupler without use of any additional tool. With high pressure sustainability, it is perfectly suitable to perform Duct Integrity Test (DIT) with pressure upto 12kg Features

• UV Stabilized
• Anti Corrosion Material
• Resistant to most of chemical
• Prevent Air and Water leakage
• Push - Fit mechanism make it easier and faster to install

Size Available

• 32mm
• 40mm
• 50mm

Air Lock - Cable Sealing Plug helps in protection of Duct and laready layerd cable from intraction with water, duct and other type of chemical. Simplex Plug is used after the fiber optic cable blowing job is done. It's Unique technology makes it easy to install simplex plug even after OFC is installed. Features

• UV Stabilized
• Protect OFC from Rat bite, other damage within duct
• Anti Corrosion Material
• Resistant to most of chemical
• Prevent dust, water and other chemical from entering into duct
• Easy to install and can be used multiple times
• Easy to lock
• Air and water tight

Air Lock - Cable Sealing Plug helps in protection of Duct and laready layerd cable from intraction with water, duct and other type of chemical. Simplex Plug is used after the fiber optic cable blowing job is done. It's Unique technology makes it easy to install simplex plug even after OFC is installed. Features

• UV Stabilized
• Protect OFC from Rat bite, other damage within duct
• Anti Corrosion Material
• Resistant to most of chemical
• Prevent dust, water and other chemical from entering into duct
• Easy to install and can be used multiple times
• Easy to lock
• Air and water tight

Fiber Jet, OFC Blowing Machine by Adishwar is high capacity fiber cable blowing machine. It has the capacaty to blow upto 1 km of Fiber Optic Cable in HDPE Duct / other within 20 minutes in a single shot. It is designed to suite extreme site condition. From extreme colt to extreme hot, can work under any given site condition. It is very easy to carry and maintain, has high durability and low cost of maintenance. Features

• Easy to operate
• Easy to carry
• On-Site training and service
• Support over phone and video confrence
• Built to perform in extreme weather condition

Chamfering Tool Chamfering tool is used to sharpen duct and make it easy to install coupler with pushfit mechanism. It also helps in reshaping the duct in its original shape. Features

• Hish Quality
• Hardened material, make it highly durable
• Resistant to most of chemical
• Easy to use

Fiber Optic Splice Closures are used in outside plant networks to protect OFC at splice point. Splice Closures manufactured by Adishwar are designed for use with any cable construction form 4F to 288F Application

• It can be used in straight - through and branching application
• It can be used in aerial, underground, wall-mounting, household and duct mounting applications
• It can be mounted on pole, wall or stand

Features

• Water tight protection
• zero additional splice loss
• Unique strength member clamp assembly
• No specialized tools required
• Resistance to vibration, UV and temperature fluctuation
• Protect fiber from ant bite, other damage
• Bend control in splice tray
• Easily re-enterable design

Benefits

• can be deployed in all extreme environmental condition: Buried, underground and aerial
• No additional loss when optical fiber are winded in the splice tray during installation and maintenance
• Prevent cable strength movement with temperature change
• Ensure bend radius protection and solution for all type of fibers
• East installation
• Economical and future ready

Size

• 4F - 288F
• FOSC, FJC