Our Products
"METAL CRASH BARRIER" (Guard Rail) is probably something most of the people don't think about, that is, until it saves their lives. It is a, proven road safety system, and is brought to you by Aditya Industries, which undertakes design, manufacturing arid installation of wide ronge of Guard Rails under stringent quality control.
Based on the guidelines issued by Ministry of Road Transport and Highways [MORTH] and other international specification like AASHTO M 180, ) Aditya Industries , offers "W' beam and 'Thrie" beam type steel crash barrier systems.
The basic function of Guard Rails is to absorb the impact energy of the colliding vehicle thus minimizing the extent of risk and damage to the vehicle and its passengers. Besides, it prevents the vehicle from rolling down the high embankments and veering off the carriage way. Thus, Guard rails find its typicle applications on Highways, Bridges and Flyovers.
We are considered as a specialist in offering high quality range of Guard Rail, which is sourced from the reliable vendors. Owing to their high mechanical strength, these Guard Rails are used along sides of roads, embankment, cliffs, bridges and canals. These guard rails redirect a vehicle away from embankment slopes or fixed objects and dissipate the energy of the errant vehicle.
Backed by the support of our robust team of experts, we are engaged in offering a wide range of Traffic Safety Guard Rail. These built guard rails acts as median barriers on roads, this metallic structure are best suited to make traffic safety systems in highways. Guard rails are installed on the highways to minimize the severity of run-off-road accidents as these products prevent the vehicles from leaving the road or from crossing on to the other carriageway. Precisely engineered, our guard rails provide elasticity & deferability for absorbing and dissipating the energy produced by impact with the vehicle.
Technical Specifications
Substrate | IS : 513 Cold Rolled Steel Coils |
---|---|
Tensile Strength | 240 to 550 MPA |
Galvanizing | IS : 277 / JIS : 3302 |
Zinc Coating | Pure Lead free Zinc 120GSM (Both Side mass) |
Pre-Painting | IS : 14246/JIS;3312 |
Type of Coating | RMP/SMP |
Total Coated Thickness (TCT) | 0.47 To 0.80mm |
Combination | 55% Aluminum 43.4% Zinc & 1.6% Silicon |
Coating Std. | AS 1397-1993 |
Material | Color Coated galvalume ASTM A792M |
Coating Mass | AZ150GSM |
Base Metal | High tensile Steel |
Tensile Strength | 240 To 550Mpa |
Total Coated Thickness (TCT) | 0.47 To 0.80mm |