These Machines are generally used for :

• Remove of Heat treated scales from the surface of the Plates,
• Rust Removal
• For removal of old paint from metal surface of ships and other structural steel components.
• For creating rough surface for proper bounding of the primer/paint.

Working Principle of the Plate Cleaning Machine :

• It consists of inlet and outlet side Roller conveyors as material handling systems. The plates to be blasted are placed on inlet side of the roller conveyor, from where it travels forward and enters into the inlet tunnel. After passing through the inlet tunnel components enters into the blast zone which consists of Blast Wheels. These Blast wheel units are strategically placed around the Blast cabinet. The arrangement of the blast wheel ensures optimum blast cleaning and maximum utilization of the abrasive energy. Blast wheels fires the abrasive at high velocity on the forward moving plates & blast cleans them thoroughly. Blasted material moves forward and enters into the outlet tunnel.
• A Dust collection system is provided with the machine which will continuously remove the dust and fine particles, thus keeping the inside of the machine and the nearby environment dust & pollution free.

These Type of Machines basically consist of under mentioned Parts :

• Main Blast Cabinet with inspection Door
• Mn. Steel Overlapping Tiles inside cabinet & on Door.
• Vestibule at Inlet & Outlet Side
• Rubber Curtain Type Job Passage opening at inlet & outlet side.
• Blast Wheel Units with Drive Mechanism.
• Abrasive circulation unit
• Bucket Elevator unit
• Abrasive Separation/Cleaning system with Storage Hopper
• Automatic Abrasive Control Mechanism (SOUNDABRATOR unit)
• Dust Collector with Cleaning Mechanism.
• Brush-Off & Blow-Off unit at outlet side.
• Roller Conveyor Type Job Handling system at Inlet & Outlet Side.
• Control Panel with PLC Control System.

These Type of Machines consist of under mentioned Parts :

• Main Blast Cabinet with inspection Door
• Mn. Steel Overlapping Tiles inside the cabinet & on Door
• Vestibules at Inlet & Outlet Side
• Spring Steel Rubber Curtain Type Job Passage opening at inlet & outlet side.
• Blast Wheel Units with Drive Mechanism.
• Abrasive circulation unit
• Bucket Elevator unit
• Abrasive Separation/Cleaning system with Storage Hopper
• Automatic Abrasive Control Mechanism (SOUNDABRATOR unit)
• Dust Collector with Cleaning Mechanism.
• Roller Conveyor Type Job Handling system at Inlet & Outlet Side.
• Control Panel with PLC Control System.

This type of machine consist of under mentioned parts :

• Main blast cabinet with inspection door
• Rubber lining inside cabinet & on door (mn. lining optional provided)
• Vestibules at inlet & outlet side
• Blast wheel units with drive mechanism.
• Abrasive circulation unit
• Bucket elevator unit
• Abrasive separation/cleaning system with storage hopper
• Automatic abrasive control mechanism (soundabrator unit)
• Dust collector with cleaning mechanism.
• Diabola type job conveying conveyor at inlet & outlet side.
• Control panel.

Machine consists of : Blast cabinet / Mn. Steel Lining Inside cabinet / Heavy Duty Blast Wheels/ Abrasive Recycling and recirculation system/ Automatic Abrasive Control Mechanism/ Inlet & Outlet side Tyre type Skew rollers/ Dust Collector

Machine consists of :

• Blast cabinet with main job entry/exit door
• Rubber lining inside the blast cabinet & on door
• Illumination inside the blast cabinet.
• Track mounted work car with rotating turn table.
• Work is provided with winching arrangement for to & fro motion.
• Turn table is equipped tilting arrangement, provided with manual hydraulic mechanism.
• Suction blast nozzles with manual horizontal reciprocation mechanism.
• Cyclone separator with blast generator
• Pulse jet type of dust collector.

Working Principle : Moulds to be blasted are placed on the rotating turn table and taken inside the blast cabinet for blasting purpose. after taking the work car inside the blast cabinet door of the machine is closed manually. shot blasting operation is started, blast nozzles fire abrasive gently on the mould, placed on the turn table. mould rotates and its own axis, to ensure the 100% exposure to the blast stream. operator manually tilts the turn table from outside the blast cabinet, by manual hydraulic mechanism, so that blasting can be done on the inner corner of the mould. at the same time, if required operator can manipulate the nozzle direction, using manual horizontal reciprocation system, for covering the un-blasted area of the mould. at the same time, cyclone separator, vacuums the fired media from the bottom of the cabinet hopper and after required cleaning transfer the usable media to the blast generator. dust produced during the blasting operation is carried out by the dust collector.