Labels #5532210

These are Self Adhesive Labels specifically designed to be used on white / grey goods----Refrigerators, Television Screens, Microwave Ovens, front body of Washing Machines etc. as 'Body Graphics'.
The Adhesive is so formulated that it does not leave any marks on the substrate after the label has been removed , hence your refrigerator/television does not require any cleaning with soap water or any solvent to remove the adhesive marks that are usually left behind by other common labels. These are labels that are Internationally used on most of the white / grey goods.
REMOVABILITY : Upto 1 Year (can be removed and applied time and again) Only precaution to be taken while applying / reapplying the label is that the surface where the label is being applied should be cleaned of any dust / dirt / oil / grease

The basic property one wants of these Labels is that --- once these Labels are applied it should not be possible for any miscreant to be able to remove them. Therefore these Labels are made on such material that doesn't allow the Label to come of in one complete piece --- these Labels have an inbuilt tendency to break off in minute pieces if one tries to remove them, after having applied the label on the substrate.These kinds of labels are used in various Industries such as White goods, Grey goods, is used in the Electronics Industry, Telecom Industry etc. The Labels are applied on each important part of the equipment e.g. IC's --- and usually there is a monthly /yearly code preprinted on these seals, for manufacturers identification.
These labels can be provided with continuous Serial Number or with BarCoding as required.Illustrated below are the properties of these labels/seals:
Very Good Break off propertiesExcellent adhesion --- any substrateLong life resistant to water, grease, gasoline, etc. Can withstand high Temperatures

These are Self Adhesive Labels used for the Decoration and Markings of Vehicles of various types & for other Equipments exposed to weathering or requiring a long life durability.4 Wheelers 2 Wheelers Shipping Containers Coolers exposed to UV Light kept outside shopsFarm EquipmentsTractors & TillersOutdoor units of AirconditionersBuses , Tankers , Aircrafts , etc. These are converted from High Quality Vinyls-----Vinyls which can withstand extreme weathering.
Basic properties expected from these labels are :Long life , around 5- 7 years Outdoor*RepositionabilityAble to withstand elevated TemperaturesResistant to Gasoline , Oil , Salt Spray
These labels are mostly offered with a removable Application Tape.For Printing, special Inks & Overcoats are used which are light fast ( resistant to UV light ) will not fade on outdoor exposure , in Tropical Conditions ( Indian Climate )
* Outdoor : when we mention outdoorit basically means that the label has to be resistant to outdoor climatic changes. The most detrimental factor for outdoor labels is the UV Lightbesides the rain ( salt/ acid etc.), abrasion(during cleaning), PLUS the gasoline that at times falls on the labels.Can provide labels which will last from 2 to 10 years or more if required Printing can be provided in various Pantone Shades , metallic or non-metallic

Ulralites ( Retro Reflectives )These labels do not fall strictly under Vehicle Graphics but have a wider application. In some countries it is mandatory for some type of vehicles to be decorated with Retro Reflectives. In India the use of this on vehicles is mostly restricted to Bumper Labelsbasically for advertising/ promotional purposes. The other most common application is Road Markers, lamp posts and Road Signs, on sail boats, life jackets etc.
Basic Working of these types of Labels
In the dark, when light is incident on these labels they reflect back the incident light --giving an appearance of glowing. But one thing should be borne in mind --the label only reflects the light received by it, in the absence of a light source it has no brightness.These are very useful Labels and provide an additional safety factor for Vehicles. These are much superior to the traditionally used plastic moulded reflectors having superior light reflecting properties and an enhanced life PLUS easy applicationThese labels again are Self-Adhesive Vinyl Labels having the same outdoor* properties as the earlier metioned Long-Life Vinyl. Various Colours can be provided in these types of labels too. Can provide labels which will last from 2 to 10 years or more if required

Mp>These are special labels which leave behind a unique pre-designed pattern if the label is removed after having applied to the substrate. So the label once applied, cannot be removed from one compressor and stuck onto another compressor say a fake one cuz the label will have a unique pattern all across it and hence it will be clearly evident that some tampering as been done. As illustrated below:
Applied Label for the first time Removed LabelOne can see the pattern all across itThe pattern left behind on the substrate
These Labels have a high Tack AdhesiveThese Labels can withstand the high temperatures attained by the compressorsThey are resistant to water / detergent and mild cycles of gasolineThey have an advantage of being clearly visible cuz of mirror finished silverText can be easily read because of contrast provided by the black lettering on silver backgroundThe labels cannot be easily Duplicated
Can also use 'Holograms' on the Serial Number Labels as shown below. It further emphasizes the Genuinity of your product. If interested we can provide you details on various types of 'Holograms'.

These use Base material as PET , POLYCARBONATE , PVC , MIRROR SILVER PET .These can be with Permanent or Removable adhesive.

The basic property one wants of these Labels is that --- once these Labels are applied it should not be possible for any miscreant to be able to remove them. Therefore these Labels are made on such material that doesn't allow the Label to come of in one complete piece --- these Labels have an inbuilt tendency to break off in minute pieces if one tries to remove them, after having applied the label on the substrate.

Dome Labels Lens Labels / PU Coated labels / Emblems / Logos / Buttons etc. also known as Product Enhancement Labels. Resin used in these Labels is Crystal Clear RoHS Compliant Polyurethane Resin.These have Excellent outdoor durability. On exposure to UV, there will be no yellowing or any tint being developed in the Clear Polyurethane Resin. The surface would not crack, the Label would not shrink. Urethane dome labels are resistant to salt, chemicals, cleaners, and most solvents. PU Dome labels also "heal" themselves when they get scratched.Dome Labels can be provided in various shapes and sizes, in various colours , including metallic colours. Besides the regular colours these can be provided in Mirror Silver Finish, Holographic/ Laser Finish, Brushed Steel Finish etc. Printing can be a four colour half-tone picture or can be a line artwork in various Pantone Shades. The range & the designs are limited only by your imagination.Fastest turn around time. Adhesive will adhere well to plastic, metal, powder coat, glass, and wood.