Other Products / Services #4065849

90-175 (Plastic Nipper)

2014 TRUSCO Published Page2-0583

Cutting Capability (mm)(Resin) phi6.0

Length (mm)183

We are offering a wide range ofWater Ionizer.

HDC-AC technology provides stable and long-term static eliminationcapabilities. We have designed an ionizer that does not requirecleaning over the long term. 1) 30% increase in capabilities2) Long-term stability of static elimination capabilities3) Decrease in emitter needle abrasions4) Ultra low ozone5) Superior ion balance6) Minimum flow type nozzle7) Cleaning timer8) Emitter needle variations9) Safety features

• As handy type of CPM function, can check the ion balance and
• decay time of ionizers.Impressed 1000V onto the plate and
• measure the decay time up to 100V.

*The torque screwdriver is Ergonomic and light weight, yet ruggedly constructed *Available in: lb-in, kg-cm and N-m (mN-m*Peak, Real Time and Peak Down measuring mode (selectable)*800 data memory.*Programmable High and Low set points with both audible beep and Green/Red LED indicator for uniform torque tightening or GO/NO GO testing *Programmable screw tightening counter*Programmable Auto Zero function resets unit to zero for easy operation*Both CW and CCW operation*ASCII format output(USB)*Runs on internal Ni-MH batteries (for 12 hours) Auto shut-off after 10 min. of non-use* AC charger and carrying case included.

• High accuracy and wide large torque range.
• low DC voltage motor enable safe and smooth operation.
• Easy carbon brush replacement.
• Design in block assembly to easy maintains on line by uder.
• Design in conformity EMC Standards.

• The electric screwdriver is very compact, accurate and durable. design not only in the most compact body of diameter 26mm, overall length 158mm and weight 187g but the lowest power consumption 6w in the world. The 6 bearing are inbuit in the hammer casing to reduce the anvil friction and bit vibration and to improve the output torque precision.

• The electric screwdriver can last through a lifetime; it outlasts several electric screwdrivers of other brand.The everlasting durability is designed with 10 million times in use in three year (The Switzerland patented motor permits continued operation at least 20, 000 hours (about 10 years operation) the service life of the contact point withstands 10 million on and off contacts.
• This product can be used in the clean room. It has passed SGS Clean room Class-10 test.

Ceramic Scissors are made of the high-tech ceramic, zirconium oxide, which is second in hardness only to diamonds. The exceptional hardness of these ceramic Scissors enables them to stay sharp over a much longer period than conventional steel cutters. FEATURES Highly wear resistant Non-conductive Non-magnetic Chemically inert Corrosion resistant

Easy to UseCompact design with an internal motor, pump, andtemperature-control circuit built into the grip. Portableand efficient.

Powerful VacuumMaximum vacuum of 0.08Mpa (-600mmHg). Removesthrough-hole solder easily.
Variable Temperature SettingSensor feedback system allows temperature setting from250-450C.
Replaceable Cartridge FilterMakes changing the filter easy.

Easy to Use
Compact design with an internal motor, pump, and temperature-control circuit built into the grip. Portable and efficient.

Powerful Vacuum
Maximum vacuum of 0.08Mpa (-600mmHg). Removes through-hole solder easily.

Variable Temperature Setting
Sensor feedback system allows temperature setting from 250-450C.

Replaceable Cartridge Filter
Makes changing the filter easy


Powerful Vacuum
Everything from through-hole to multi-layered PCB


Ceramic Heater with Internal Sensor
A wide range for terminals, connectors and flat ICs


Zero Volt Switch Circuit
Reduces noise during heater ON/OFF


Replaceable Cartridge Filter
Makes changing the filter easy

Temperature management using ON-OFF control. Digital temperature display for easy temperature management. Vacuum pickup function, Flow meter for easy airflow management. Auto Cool Down function to protect heater.

Either Auto profile or Repeat Profile function (PAT.). 5 zone profiles available:PREHEAT 1, PREHEAT 2, PREHEAT 3, REFLOW, and COOL. lUp to 19 profiles* can be saved for each of the 5 zones. One profile can be registered for HAND Mode. Accurate PID temperature control.

Heater and Vacuum switches located on the handpiece for easy control. ON/OFF interface with Preheater (connection cable optional). Keypad lock and Offset functions. Instant cool down on all zones by pressing the COOL key.

Abisofix A5 standard stripper for Enamelled and Braided wire type 5, dia 1.2-4.5 mm (MK5LM die). length stop function from 3 to 40 mm and length stop can be removed if more than 40 mm length to handle. power supply is Optional

Bench top economicalfume absorber, help to remove harmful fume in soldering area. For detail down load PDF??. Mfr By:ADVANCE TECH

Interflux Belgium VOC-free flux IF-2010F (RoHS Compliance) work with a spray or foam. Organic chemistry has the ability to evaporate totally when enough energy is transferred to those chemicals, resulting in an extremely clean to No-Residue PCB. In VOC Flux: No more fire risk, No more Volatile Organic Compounds emission, No more irritating alcohol smell in your production, No more use of thinner, No or very reduced checking of flux quality, Improvement in solderability and cleanliness, Lower transport, storage and insurance costs, A reduction of circa 30% in flux consumption. For detail down load PDF??. From:IF Belgium

SMT Rework Flux from Interflux Belgium Model IF-8300 is gel flux with High tackiness. It has helps in holding SMD component during soldering. Excellent solderability and evaporate if enough energy is applied. Flux is Ideal for BGA Soldering. For detail down load PDF??. From:IF Belgium

BULK-LENGTH SPOOL

Interflux Belgium Bath Treatment Prevent dross formation, Reduce dross amount, Remove impurities, SAVE MONEY ! This is effective solution to Floating particles in the solder, Bad heat transfer, Bad flowing solder, Dirty boards, Lumpy Solder, Micro bridging, Higher solder consumption: cost, More frequent Maintained of Machine. Applicable for Wave soldering Machine, . Hot air Levelling Machine, Static Solder Bath For detail down load PDF??. From:IF Belgium

De-oxidation oil IF 910 is oil to separate metal from oxides in solder bath the (good, shiny) solder particles are remelted in the solder bath, and only the oxides will remain, which can be remove easily. For detail down load PDF??. From:IF Belgium

Renew Eco-Oven Cleaner, One Quart
Used for periodic preventative maintenance to keep equipment running at top performance levels. Cleans reflow ovens, wave soldering systems, and associated heat exchanger systems by removing all types of flux residues (e.g. waterbased, RMA, noclean, leadfree). It is fast acting and more effective and safe than IPA for bakedon flux residues.

Features & BenefitsQuickly clean flux residue from oven & wave fingersNon-flammableNon-ozone depletingSafe on warm ovensBiodegradableLow VOC, zero GWP

Digital Torque Screw Driver

ESD type is available for ordering.

• The electric screwdriver is very compact, accurate and durable. design not only in the most compact body of diameter 26mm, overall length 158mm and weight 187g but the lowest power consumption 6w in the world. The 6 bearing are inbuit in the hammer casing to reduce the anvil friction and bit vibration and to improve the output torque precision.

• The electric screwdriver can last through a lifetime; it outlasts several electric screwdrivers of other brand.The everlasting durability is designed with 10 million times in use in three year (The Switzerland patented motor permits continued operation at least 20, 000 hours (about 10 years operation) the service life of the contact point withstands 10 million on and off contacts.
• This product can be used in the clean room. It has passed SGS Clean room Class-10 test.

ASA Pneumatic screwdriver has following four features:

Accuracy:ASA Provide patent clutch with +-3% accuracy of torque, assure the best quality.

Economic:Wide-ranging torque with many patent and longer life cycle of motor.

Delicacy:Combination of art, ergonomics and mechanical design.

Technology:Special mechanical structure and patent motor give you low noise, low vibration and high accuracy.

Fully- Auto Shut off Push to Start Pneumatic Screw Driver (2.016.0 Kgf-cm /1800rpm)


Availability:In Stock

Pantograph tool arm Holder to hold electric and Pneumatic screw driver. Screw driver come at 90 deg and help straight 90 deg force to apply on job. This holder also act as safety for reverse reaction to operator Hand. Easy to operate and add efficiency without fatigue to operator for day long work. From:ASA TAIWAN

We are main supplier of this product.

ESD Chair PU Foam Chair Meet 1000 Clean room

Illuminated LED Magnifier(8D)

Tool Kit Model TL-20 from goot Japan 20 tools tool kit from goot Japan, all tools Made in Japan. For detail down load PDF??.

Tool Kit Model TL-20 from goot Japan 20 tools tool kit from goot Japan, all tools Made in Japan. For detail down load PDF??.

Power supply for heat cutter 220 Volt adjustable ( Power supply only, Cutter separately)