Advance Equipments - Testing Equipment

We are leading Static & Kinetic Coefficient Of Friction Tester - Digital With Printer, Manufacturers, Suppliers & Exporters Located in Dombivli Dist. Thane, Mumbai India.

As per ASTM D-1894

To determine the coefficient of friction of plastic films and sheets

Model: AE-SK-DP

Reference Standard: ASTM

Specifications :

System Status : Digital + Printer.

Data Entry : Through alpha-numeric keys.

Result : Displayed on LCD & will be printed through printer.

Reports in Terms of : Peak load; Average load; Static friction; Dynamic friction.

Load Capacity : 0 9.999 kg.

Resolution : 1 gram

Weight of the Sled : 200 grams

Speed of Testing : 150 mm/min (others optional) ***

Sample Holding System : Spring loaded (other optional)***

Accessories: 3 nos of aluminium anodised Templates

Supply : 230 VAC/50 Hz

Power : 120 Watts

Paint : Powder coated

We are leading Izod Impact Tester/Charpy Impact Tester Computerised, Manufacturers, Suppliers & Exporters Located in Dombivli Dist. Thane, Mumbai India.

As per ASTM D256, ASTM D6110, ISO 179 & ISO 180

Model: AE-ICT-FC

Reference Standards: ASTM, ISO, IS

Specifications :

Material of Construction: Mild Steel

Capacity : 25 Joules (others optional)

Impact Speed : 3.46 m/s. (others optional)

Pendulum Release Angle: 150 degree (others optional)

Scales : 2.71 Joules; 5.42 Joules; 10.84 Joules; 21.68 Joules & 25 Joules. (Others optional)

Resolution : 0.001 Joule.

Results on controller : In Terms of J, J/m; Kgcm/cm; J/m; J/cm; Kj/cm (others optional)

Graphic Display and Print : Reports contains of impact energy Vs Angular displacement graph andnumeric reports consisting of values for impact strength as per ASTM standard, ISO and ISstandard in different units.

Supply : 230 VAC/50 Hz.

Paint : Powder coated.

Applications :

In Plastic Industry/Polymer Industry

In Rubber Industry

In Textile Industry

In Packaging Industry

In Pharmaceutical Industry

In Electronic Industry

In Engineering Industry

In Automobile & Aerospace Industry

As per ASTM/ISO/IS standards

Tests Types: Peel, Bond, Seal, Cof & Tensile

Model: AE-PBSCT-1LC-50-FC

Reference Standards: ASTM, ISO, IS

Specification :

Mechanism : Single column

System Status: Computerized + Digital

Software : AE- Embedded

Data Entry : All Data through software OR from Console

PC Connectivity : Rs-232 (USB Optional) ***

Reports : Graphical + Data through software

Units : KG; Newton; Pound; cm; mm; inch.

Data Merging Facility : Available

Report print : Through software

Load Cell : 50 Kg with 1 grams resolution.

Cross Travel : 1000 mm

Resolution of displacement : 0.1 mm

Speed 10 500 mm/min (others optional) ***

Reports Contain :Peak load, Break load, Elongation at Peak load, Elongation at break load, TensileStrength at peak load, Tensile strength at break Load, %elongation at peak load, % elongation atBreak load, Youngs modulus, Yield load, Yield stress, Load Vs Elongation graph, Peel Strength, Bond Strength, Static Friction & Dynamic Friction.

Accessories : Rubber Padded Grip 1 Pair (others optional)***

Supply : 230 VAC/50 Hz

Power : 750 Watts

Paint : Powder coated

Specification :

Indicator : Microprocessor based digital load indicator with range up to 9.999 kg, resolution of1 gram, accuracy of + 1 gram and memory facility of peak load.

Size of the sled : 63.5 mm X 63.5 mm X 6 mm.

Weight of sled : 200 grams.

Speed : 150 mm / minute.

Templates : Three number of S.S templates for sample cutting.

Paint : Powder coated.

As per ASTM/ ISO15527/IS standards

Wear Resistance

Engineers have many factors as consideration to choose material in mechanical engineering design, one of the most important factors is wear resistance. Wear resistance is the ability of a material to resist the gradual wearing away caused by abrasion and friction with another material.

Many methods used to measure material wear resistance, for thermoplastics wear resistance uses and slurry test by ISO15527 reference.

By sand slurry test method, specimens rotated at 2002400 rpm for 3 hours inside test cup that containing slurry abrasive material (silica sand or aluminum oxide).

After testing, the loss in mass of the test specimens calculated and compared to another material specimen and specifies percentage of mass loss

VSP as per ASTM D1525 and HDT as per ASTM D648

Models: AE-VSPHDT-2S-D

Reference Standards: ASTM, ISO, IS

Technical Specifications :

Material of Construction: Inner SS & Outer MS with powder coated.

System Status: Analogue.

Stations: 02 Nos (others optional)

Temperature: Ambient to 300C.

Temperature Ramp Rate: 50C/hour to 120C.

Dial Range: 0 10 mm with 0.01 mm resolution.

Weights: 1Kg, 5Kg for VSP; 5 to 2000 grams modular binary test weights for HDT

Paint: Powder coated

Supply: 230 VAC/50 Hz

Grippers

1600 Sector

Pointer

Sector Lock

Sturdy Base

Adjustable Footrest

Counter Weights

Scale

Significance :

This method is of value in ranking relative tearing resistance of various plastic films and thin sheeting of comparable thickness. Experience has shown the test to have its best reliability on relatively less extensible films and sheeting. Variable elongation and oblique tearing effects on the more extensible films preclude its use as a precise production control tool for these types of plastic.

Capacity : 1600gms; 3200gms; 6400 gms;

Clamping surfaces of each clamp : L-35.5mmxM-15.5mm

Distance between clamps : 2.5 +/-0.25mm

Tearing Distance : 43 +/0.15mm

Slit Size : 20mm

Scale Reading : 0 to 100% Range

Calibration check weight: At 1600gms: At 3200gms. : At 6400gms

Standards : D-689 ;BS 4153; ASTM D1424; DIN 53862; M&S 29

As per IS, ISO & ASTM standards

Applications :

• In Plastic Industry/Polymer Industry
• In Rubber Industry
• In Textile Industry
• In Packaging Industry
• In Pharmaceutical Industry
• In Electronic Industry
• In Engineering Industry
• In Automobile & Aerospace Industry

To check the impact effect on the seat surface of the plastic molded chairs. A pneumatic cylinder of 400mm stroke and diameter of

40 mm.

Electrically operated solenoid valve will be provided tomove the piston UP & DN

An 18 kg weight will be provided to check impacton furniture.

A counter will be provided to count the number of trials.

Four hard chrome plated shafts of 2.0 meter heightwill be provided.

A lock will be provided to adjust the height of boxcontaining pneumatic cylinder and solenoid valve.

Impact Static weight: 25 kg.

Impact Cycles Range: 0 - 99999

Air Supply: 5 Kg/cmSq.

Supply: 230 VAC/50Hz

Density as per ASTM D1250, ASTM D792, ISO 1183 and DIN 51757

Specific Gravity as per ASTM D1429 08

As per ASTM D1709 and IS 2508

To test the impact resistance of the film by free falling darts.

Models : AE-DIT-S

Reference Standards : ASTM, ISO, IS.

Specifications :

Darts : 2 nos supplied with equipment.

Dart Falling Heights : 220, 660 & 1524 in mm.

Weight Box : 5 to 500 grams incremental loads.

Dart Hold/Release System : Electromagnet with 0Noise + 0 Vibration.

Start Command : Paddle Switch.

Vacuum System : In built + Noise less.

Vacuum Range : 760 mm of Hg.

Counter : Digital with memory back up.

Shaft Length Adjustment: Easy with accurate alignment.Supply : 230 VAC/50 Hz.Power : 120 Watts.Paint : Powder coated

AS PER IS: 4985-2000 & IS: 12818-1992 R-PVC Pipes

Features :

Support system for the micro duct at the base.

Paint : Powder Coated

Specifications :

Striker Weight : 1 Kg

Permissible Tolerance on mass of striker : 0.5 %

Impact Nose : 13mm radius Hemispherical (SS 316Hardened one, Polished and free from indentations orother imperfections)

Rigid specimen support : 120 0 V Block.

Height of fall: 2 Meters.

Main frame with guide rails or tube with true verticalposition to accommodate striker.

Drop weight solenoid release and automatically returnedusing pneumatically operated rod less cylinder.

Paint : Powder coated.

Applications :

In Plastic Industry/Polymer Industry

In Rubber Industry

In Textile Industry

In Packaging Industry

In Pharmaceutical Industry

In Electronic Industry

In Engineering Industry

In Automobile & Aerospace Industry