Our Products
Reach Us For Great Offers
The clients can avail the Engine Oil Supplement from us. The Lubemaster Engine Oil Supplement is an efficient oil treatment that is formulated scientifically to increase the performance of the engine. The Engine Oil Supplement gives Triple Wear Protection and is greatly demanded by the clients for its high quality. The Engine Oil Supplement can be availed from us at the market leading price.
Benefits
How To UsePour contents of can into warm, idling motor at each oil change or when oil level is low. If motor has extreme wear or high mileage and uses excessive quantities of oil, add two cans.
Additional Information:
Payment Terms : L/C, T/T
Properties
Properties | Unit | Specification |
---|---|---|
Specific gravity @ 68 oF | - | 0.80 - 0.90 |
Flash Point | oF oC |
329 165 |
Boiling Point | oF | Not Determined |
Water Solubility | - | Nil |
Reach Us For Great Offers
We are one of the reliable Brake Fluid Manufacturers based in Navi Mumbai. The Brake Fluid offered by us is extensively demanded for the easy working of automotive brake systems. The DOT 3 Brake Fluid, we supply, efficiently protects the rubber as well as the metal parts and ensures smooth working of the brake. The Brake Fluid, we offer, is suitable for all types of automotive brake systems where break system is expected. The clients can avail the Brake Fluid from us at the affordable price.
Packing Information
Additional Information:
Payment Terms : L/C, T/T
Reach Us For Great Offers
To cater to various glass, wood, leather, or canvas bonding requirements of varied industries, the Epoxy Steel Adhesive is an excellent offering. The Epoxy Steel Adhesive 4mins, is a two component ambient curing, tough epoxy system that offers three dimensional network to the applied material. The Epoxy Steel Adhesive is known for providing firm resistance against moisture, oil and various industrial solvents and offering strength within 30 minutes.
Usage
Advantages
Method Of Usage
Make sure the surface (s) to be bonded is free from moisture, oil, dust, etc. Squeeze out equal quantities of part - A & Part - B in the ratio of 1: 1. Mix it thoroughly to get a uniform paste. Apply a thin layer of adhesive on to both surfaces and assemble them together. Ensure contact pressure throughout the curing process. Allow the bonded substrates to cure at ambient temperature for a minimum period of 24 hours. Replace caps to original tubes or hardening may occur in tube nozzles.
N.B : The bonding operations must be completed within a period of 2 - 3 minutes after mixing both the components together. Shelf Life
Storage
Packing
Properties
Properties | Unit | Specification |
---|---|---|
Appearance Component - A Component - B Mixed adhesive |
- | Paste Paste Paste |
Colour Component - A Component - B Mixed adhesive |
- | Black Whitish Grey |
Viscosity @ 300C Part A (Sp-7 Rpm 20) Part B (Sp-7 Rpm 20) |
- | 70,000 - 1,00,000 85,000 - 1,15,000 |
Mix Ratio (by weight / by volume) | - | 1 : 1 |
Specific Gravity Part A Part B |
- | 1.58 - 1.78 1.50 - 1.70 |
Pot life at RT (2gms mix) | Minutes | 4 |
Lap Shear Strength After 1 hour After 1 day |
Kg/Cm2 | 100 150 |
Hardness, Shore D | - | 75 |
Cure Schedule @ (RT 28 - 35o) | Hours | 24 |
Reach Us For Great Offers
We hold expertise in manufacturing and supplying high quality Butyl Tape known for its powerful adhesion. This non-curing sticky tape of Exsan brand is specially formulated quick and neat installation of gasket less windscreens and Bakelite. The Butyl Tape, we supply, helps avoiding direct contact of the pinch weld & the glass and great compressibility in both high as well as low temperatures.
Method Of UseRemove the Windscreen and sealant. Clean and prime the pinch weld to ensure no dirt or grease remains. Hands press the tape into place around the pinch weld. Place the windscreen carefully over the tape and apply hand pressure uniformly to reduce air entrapment. The adhesion slowly improves over a period of time to its optimum level. In cold climate conditions, it is best to warm the tape to soften it prior to installation. This product can be used alone or in combination with other sealants (e.g. Polyurethane Sealant) depending on the type of installation. Shelf Life
Storage
Packing
Properties
Properties | Properties Unit | Specification |
---|---|---|
Appearance | - | Round / Square Tape Form |
Colour | - | Black |
Odour | - | None or Very Ligh |
Dimension | - | 9.5 mm x 9.5 mm x 4.57 meters (S) 9.5 mm dia x 4.57 meters (R) |
Specific gravity | At RT (28 33o C) | 1.2 -1.3 |
Needle Penetration after 24 hours Worked sample | At RT (28 33o C) | 30 - 38 |
Heat Resistance Test | 110o C | |
Water absorption test | 24 hours at room Temperature | < 1% |
Corrosion on ED Coated painted Metal | 24 hours | No Corrosion / No Stain |
Peel Strength, kgf after 24 hours (painted panel to Polythene sheet), (0.15u) | - | Min 1.5 (Square) Min 0.8 (Round) |
Lap shear strength (after 24 Hours) ED Coated painted metal to glass | Kg / cm2 | 0.85 kg/cm2 (Square) 0.85 kg/cm2 (Round) |
Sealability Test at 120 mm for 20 seconds- Square 80 mm (for 20 seconds- Round | - | No leak |
Cold Resistance Test | At (-15 ±2o C, 3 hrs) | No de-bonding |
Reach Us For Great Offers
The clients can avail from us high-grade Valve Grinding Paste that is extensively used in automotive vales for varied grinding requirements. The unique design of the Valve Grinding Paste offers easy access to either fine or coarse paste-like grit. The clients can avail the high quality Valve Grinding Paste from us at affordable price.
Packing Information
reach us for great offers we manufacture rtv silicone sealants indigenously in our taloja factory for the last 8 years, and most of our manufacture is exported to various gulf and african countries. We supply wide variety of silicone sealants in the market that includes exsan black & gray silicone sealant, exsan red & blue silicone sealant and exsan clear & white silicone sealant. We are a highly trusted and sought after brand in the silicone sealants manufacturing domain. We religiously follow world class governing standards in the manufacture of rtv silicone sealant such as astm, jis, mil, din, sae standards. We use raw materials from the best sources which are sourced by our highly experienced in-house experts who have over 20 years experience in the field of adhesives, sealants, lubricants, fluids, and specialty greases. Suitable for various sealing and bonding requirements in glass, ceramic, wood, aluminium, concrete, metal, alloys, steel etc the exsan clear, white, black, grey, blue, cream, yellow, gold colored silicone sealant is manufactured by us. The exsan silicone sealants are also known as multi-purpose fast curing specialty silicone sealant tubes with wide applications such as curtain wall joints, bathtub applications, roof applications, door and windows applications, all kinds of fenesta applications, fire rated applications and many more. packing information :- download
Reach Us For Great Offers
To cater to various water pump-lubricating requirements of automobiles, we offer well-tested high performance Radiator Coolant. The Radiator Coolant offered by us offers all season protection to the automobile and is demanded widely for its quality. The clients can avail the Radiator Coolant from us at the market leading price. Thus, we are recognized as a prominent Radiator Coolant Manufacturer based in Maharashtra.
Features Of Radiator Coolant
Packing Information :
Additional Information:
Payment Terms : L/C, T/T