Advantech Solutions Delhi

Power Chuck - Heavy Duty Clamping Power for Fast Metal Removal With the MAXIN tool, only a small tightening torque compresses the frontal nose, providing an extremely high gripping force. It is designed for roughing and finishing applications in milling where high torque transmission, maximum accuracy, compactness and easy operation are required.  Features: The clamping nut is not threaded (as in ER collet chucks) Designed for direct chucking of the tool shank (no need for intermediate collet) for maximum gripping force Sealed nut construction No axial drawback of the tool shank as chuck is tightened Thick wall construction to withstand greater side loading forces The high gripping force achieved by the MAXIN Power Chuck results from the shallow nose tapered cone (1) with helical slot (3) inside the internal chuck bore. It exerts a very high clamping force when the clamping nut (2) is rotated in the axial direction. The shallow taper of the tool nose (1) and the angled position of the needle bearing (4) that sit in the cage create the axial movement of the clamping nut (2). This unique clamping mechanism eliminates axial movement of the shank while clamping, simplifying the preset process. Runout Accuracy: Maximum runout at 100 mm Overhang is less than 0.01 mm

We are offering multi point diamond dresser. A multi point diamond dresser in which sharp natural diamonds are set in a circular crown at right angle to the operating plane. As soon as the diamonds on the indexed position are completely used up, the crown can be re-indexed on the shank for new points. Shanks for the crown are made to customer's specifications. Applications : all types of large wheels where fine truing is considered important. specially recommended for cylindrical grinders.

ISO standard tools perform most of the industry's chip removal. The applications range from finishing to roughing. As a full-line supplier of metalworking tools, ISCAR naturally provides the full ISO range of quality tools. All standard geometries are supplied, including the most popular trigon shape. These semi-triangular turning inserts used for axial and face turning, feature three 80° corner cutting edges. They replace the rhombic inserts that had only two cutting edges, thus saving production time and cost while maximizing insert life. ISCAR offers a variety of unique chipformer and grade combinations that provide solutions to most of modern industry's machining needs.  ISCAR is launching a completely new line of external and internal tools as well as large size inserts for the heavy duty applications, called SUMOTURN. Heavy duty turning applications feature relatively large depths of cut, high feed rates and rough, non-uniform surfaces to be machined. These applications require both tough carbide grades and specifically designed chipformers. The recently introduced SUMO TEC carbide grades enable ISCAR to cope better with heavy duty turning. The new tools expand the range of ISCAR tools for rough turning applications. Lever Lock tools are recommended for large depth of cut and interrupted cut applications

A Multi Point Diamond Dresser in which Sharp Natural Diamonds are set in a circular crown at right angle to the operating plane. As soon as the diamonds on the indexed position are completely used up, the crown can be re-indexed on the shank for new points. Shanks for the crown are made to customer's specifications. APPLICATIONS : All types of large wheels where fine truing is considered important. Specially recommended for cylindrical grinders. ADVANTAGES : The diamonds can be completely used up and resetting is redundant. Since two or more diamonds come in contact with the wheel the work load on the diamonds is divided and the diamonds last longer. A large area of the wheel is dressed more efficiently in a relatively shorter time than a single point. As several points are in use simultaneously the feed may be safely increased. Finer finish is obtained on the wheel due to the crystal shape of the diamonds employed. Can be used for side dressing. SIZES : MIC-24 with 24 Diamonds for wheel size up to 600 mm diameter wheel. MIC-36 with 36 Diamonds for wheel size above 600 mm diameter wheel.

We are offering milling tool. The new helido square s845 sxmu 1606 adtr-mm insert has 8 helical right-hand cutting edges, providing a very economical solution. It is very thick and strong and has a wiper which leaves an excellent surface finish. The insert is clamped by a strong m5 screw into an inclined dovetail pocket which provides a very rigid clamping. Due to the most advanced production technology, excellent grade combinations, unique chip deflector and positive cutting angles, the new face milling tools family features high durability, low cutting forces and excellent tool life.