Sharjah, United Arab Emirates
Write a Review
Our Products
Our offered Product range includes Knee Universal Milling Machine, Combined Milling Machine and End Milling Machine.
The Universal Knee-Type Milling Machine is suit for milling flat, inclined face, angle surface, slots by employing disc uctters, angular cutters, formed cutters and face metal milling cutters.
When mounted with th index, the machine will be able to perform milling operations in gears, cutter, helix groove, cam and tub wheel.
The longitudinal, cross and vertical movements of the blade can both be operated by hand and power, and it can be rapid moved. Working table and slide ways adopted quality cast hardened ensure high accuracy.
| Technical Data | Unit | X6132A | ||
| Table Size | mm | 320 x 1320 | ||
| Longitudinal Travel X | mm | 800/780 | ||
| Cross travel Y | mm | 300/280 | ||
| Vertical Travel Z | mm | 410/400 | ||
| Feed Speed Steps | mm | 18 | ||
| Feed Speed ranges: | ||||
| Longitudinal X | mm/min | 15-750 | ||
| Cross Y | mm/min | 15-750 | ||
| Verical Z | mm/min | 5.7-280 | ||
| Min. Distance between spindle center to table | mm | 235-535 | ||
| Spindle speed steps | 18 | |||
| Spindle speed ranges | Kw | 30-1500 | ||
| Main motor power | Kw | 7.5 | ||
| Overall Dimensions | mm | 2327 x 1792 x 1720 | ||
| Weight | Kg | 3300 | ||
The multiple milling machine OMEC F9 is used to make parallel indents for door frames and other furniture pieces. The machine is equipped with a cutter unit and two saw units to allow the machining of 45Ocut. The F9 model machine automatically single both cases and single crosspieces. The locking of the pieces takes place automatically at the beginning of each cycle. The same takes place for the release of the pieces at the end of each cycle. Controls are located on a built-in control panel. The F9 model is controlled by a numerical control system which is entrusted with the working cycle control.
| Horizontal end milling machine with manual feeding, milling at 45/90/-45 | |
| and intermediate degrees with quick change of the cutter block. Equipped | |
| with spindle at 2800rpm with useful stroke 390mm. Max cutter diameter 200mm. | |
| Threephase motor 2, 5HP. | |
| STANDARD EQUIPMENT | |
| Pneumatic clamping set | |
| Turret stop for presetting 6 milling depths | |
| Pneumatic spray mist lubrication | |
| Cutter blok D. 32mm | |
| Air gun | |
| Air filter | |
| Full protection guard | |
| OPTIONALS | |
| Single phase motor | |
| Cutter block D.32mm | |
| Emulsified cutting oil 20l | |
FACTORIES EQUIPMENT & MACHINERY TRD. L.L.C. (FACTORIES EQUIPMENT & MACHINERY TRD. L.L.C.)P.O. Box: 28459 Shed No: 2, Opposite Catterpillar Road Near J&P Signal, Sharjah, United Arab Emirates
Share us via
