JTAN Systems

dubai, United Arab Emirates

With the risk of falling or moving objects, bumps and penetration injuries from static objects and of course slips, trips and falls, wearing safety helmets in the workplace is not only a requirement but a piece of common sense. In a range of colours and fully adjustable, our safety helmets and bump caps provide that last line of defence against head injury at low trade prices. Both Panoply and Venitex ranges are CE marked and ready for immediate delivery.

Approvals & Standards

V-Gard Slotted Caps and Non-Slotted Hats meet all applicable requirements for a Type I (top impact) helmet as outlined in ANSI/ISEA Z89.1-2009 (Class E), and also as outlined in CSA Z94.1-2005 (Class E) with 1-Touch and Fas-Trac Suspensions.

V-Gard Caps and Hats also meet the ANSI/ISEA Z89.1-2009 voluntary standard for reverse donning and low temperature.

Hi-viz orange and hi-viz yellow-green V-Gard Caps and Hats meet the ANSI/ISEA Z89.1-2009 voluntary standard for high visibility as well.

WARNING: Do not mix suspension and helmet sizes. Make sure the sizes match (i.e., standard-size suspension with standard-size helmet). Use only MSA suspensions on an MSA helmet. Failure to comply with the above will reduce the energy-absorbing ability of the protective helmet, which can result in serious injury or death.

Applications

AgricultureConstructionElectric UtilityHazardous MaterialsNuclearOil & GasPaper & Pulp

Hazards

Confined SpaceElectrical ShockOverhead Falling ObjectsSplashWelding

Product Information

Consist of a polyethylene shell and suspension working together as a protection system. Cap or hat styles, available in three cap sizes, small (6 to 7-1/8 inches), standard (6-1/2 to 8 inches) and large (7-1/2 to 8-1/2 inches) and the hat is 6-1/2 to 8 inches