KCL Valve MidEast

Sharjah, United Arab Emirates

This is designed according to the MSS SP-61, 81(Class 150LB) and MSS SP-135 (Class 150LB, 300LB).

General knife gate valves are designed to be suitable for the control of fluids of large particles such as dregs, sediments, etc. In addition, this is of a metal seat type, so there are an allowed criterion for water leakage and a direction, and thus the installation direction shall be considered when installing a valve. The soft seat type has no allowed criterion of water leakage and is designed to be easily installed in both directions. In addition, this can be used in a pure liquid state of fluid line as well to replace other kinds of valves already installed, and was developed to avoid seat leakage even under a pressure of soft seat knife gate v/v 150LB, 300LB in particular.

1. DESIGNMSS SP-61, 81MSS SP-135Flange Standard ASME B16.5, Class 150LB/300LB.Combination of half circle blade-type gate and Rubber seat/Metal seat.Bonnt type and Bonnetless type allows various operations.

2. PRODUCTS FEATURESPatent product that improved seat structure from the previous knife gate valveZero leakageWide usable rangeNo categorization for installation direction

3. SPECIFICATIONSStandard : MSS SP-61, 81, 135 ASME B16.5Size : ANSI 150#/300# 248JIS 10K/20K 50A1200AMaterial : A536, A216-WCB, LCB, A351-CF8/CF8M, A351-CF3/CF3M, CG-8M CD4MCU, Titanium, Etc

This is designed according to the MSS SP-61, 81(Class 150LB) and MSS SP-135(Class 150LB, 300LB)

General knife gate valves are designed to be suitable for the control of fluids of large particles such as dregs, sediments, etc.

In addition, this is of a metal seat type, so there are an allowed criterion for water leakage and a direction, and thus the installation direction shall be considered when installing a valve. Metal seat knife gate valve of KCL manufactured according to the MSS standard, shall not exceed the maximum leakage allowance of 40ml/min/NPS(1.6ml/min/DN) for the pressure of 40psi(2.8bar).

1. DESIGNMSS SP-61, 81MSS SP-135Flange Standard ASME B16.5, Class 150LB/300LB.Combination of half circle blade-type gate and Metal seat.Bonnet type and Bonnetless type allows various operations.

2. PRODUCTS FEATURESDesigned to apply to residue, paper sediment, and corrosive liquid.Perfectly controls flow of liquid through the knife processed with a certain straightness

3. SPECIFICATIONSStandard : MSS SP-61, 81, 135 ASME B16.5Size : ANSI 150#/300# 248JIS 10K/20K 50A1200AMaterial : A536, A216-WCB, LCB, A351-CF8/CF8M, A351-CF3/CF3M, CG-8M CD4MCU, Titanium, Etc