LABGULF FZC

sharjah, United Arab Emirates

In the lab, in the process, in the field - the CALIDUSTMGas Chromatograph is fast becoming the leading choice for GC applications in a wide variety of industrial and environmental applications.
With the ultrafast, ultra-user-friendly, highly durable, practical, reliable and economical CALIDUS GC you will find more measurement solutions faster and easier, produce better quality products, increase productivity and profitability, with far less hassle and environmental impact.

Learn more about what the CALIDUS Gas Chromatograph can mean to you and your operation.

• D7798 Method
• Modules(Column and Detector)
• Features
• Case Studies
• Literature
• Models

The table below shows which elements can be determined by which elemental analyzer.Simply click on the analyzer name corresponding to your application fortechnical specifications and detailed product information.

1) While the CS-580 uses a horizontal furnace, the CS-580A is equipped with a vertical furnace in order to integrate the automatic sample changer Autoloader.
2)While the CHS-580 uses a horizontal furnace, the CHS-580A is equipped with a vertical furnace in order to integrate the automatic sample changer Autoloader.
3) Compared to the CW-800 the CW-800M can process different carrier gases (N2, O2) and change temperatures during measurement (ramping).

Our Force Tensiometer K11 is a precision and fully automatic instrument for the reliable measurement ofsurface tensionandinterfacial tension. With its high-quality components and simple operation, the K11 assists in the quality control and optimization of surfactant solutions and interfacial processes.

Our Force Tensiometer K11 measures the surface tension and interfacial tension based on the force which acts when a measuring probe is wetted. The instrument features a high-quality force sensor which ensures accurate results and high reproducibility. In the interests of precision, the probes are also manufactured with highly accurate contours. Our instrument therefore provides equally reliable results for measurements carried out using thering, plateorrod method. The K11 also enables the density of liquids to be measured accurately. This method is particularly useful for measurements using the ring method, in which the density is used to calculate the surface tension from the force. Measuring density with our K11 saves the trouble of carrying out external measurements.

The sample stage of our K11 has a high position resolution and, if required, can be moved very slowly and carefully. This enables the force maximum in ring measurements to be determined with great accuracy, and therefore makes this method highly reliable. As an option, the stage can also be moved very quickly for setting up measurements rapidly. At the same time, the large, illuminated sample chamber helps when preparing the measurement. Magnetically locking glass swing doors shield the measurement from troublesome air currents.

Our K11 has the option of accurately controlling the temperature of the samples between -10 and 130 C. This enables thermal process conditions to be simulated, for example to optimize the addition of surfactant for a particular production step. An additional, automatic stirring function ensures optimum mixing of dispersions before measuring.

Intuitive operation by means of a special touch panel is a unique feature of our K11. Our touch panel has intelligent, programmable measuring sequences for all the methods incorporated. A simple touch of a finger starts the measuring programs, the parameters of which we have optimized for the most frequent situations. The accurately controlled sequences guarantee that the measuring conditions are highly repeatable. However, the parameters can also be flexibly adjusted and applied as a user-defined standard. A reliable measuring sequence for the standardized quality assurance of transformer oils in accordance with ASTMD971 is also included.

Our touch panel software manages the measuring results in a transparent structure. The touch panelalso has a vast working memory and convenient, fast access to a very large number of storable measurements.It is also capable of producing comprehensive and clear measurement reports, sending them directly to a printer or saving them in the widely used Microsoft XPS format. Data can simply be copied from the touch panel to a USB flash drive for easy export.

• Determination of the effectiveness of wetting media
• Checking the surfactant content in solutions below thecritical micelle concentration(CMC)
• Measurement of interfacial tension for the quality assurance and optimization of emulsifiers
• Decomposition product content in oils according to ASTMD971.
• Tank clearance and cleaning validation in the foodstuffs industry

• Surface tension using the ring, plate and rod method
• Interfacial tension using the ring, plate and rod method
• Surface tension and interfacial tension using thering tear-off method
• Testing of transformer oils in accordance with ASTMD971
• Measuring the density of liquids
• Measurement from -10 to 130 C, temperature measurement with internal sensor

There are numerous techniques by which to determine the quantity vs. equivalent size distribution of a collection of particles.Selecting the right technology is critical to obtaining reliable data. No single technique is appropriate for all materials or applications. For this reason, Micromeritics offers you six different particle size analyzer choices, each employing different analytical techniques, to fit your application.

Gas pycnometry is recognized as one of the most reliable techniques for obtaining true, absolute, skeletal, and apparent volume and density. This technique is non-destructive as it uses the gas displacement method to measure volume. Inert gases, such as helium or nitrogen, are used as the displacement medium. Density calculations using the gas displacement method are much more accurate and reproducible than the traditional Archimedes water displacement method.

The AccuPyc II 1340 Series Pycnometers are fast, fully automatic pycnometers that provide high-speed, high-precision volume measurements and true density calculations on a wide variety of powders, solids, and slurries. The instrument completes mostsample analyses in less than three minutes without sacrificing accuracy. After analyses are started with a few keystrokes, data are collected, calculations are performed, and results displayed. A minimal amount of operator attention is required.

This purpose-made Oil Test Centrifuge is fully programmable allowing automatic configuration to the specified oil test parameters. A four place swing out rotor and universal bucket assembly accommodates low cost adaptors and cushions suitable for borosilicate glass centrifuge tubes of the types specified for oil testing: 6 or 8 inch conical, 8 inch trace sediment, 8 inch pear-shaped or 12.5ml. To reduce errors in measurement of tube content, the rotor design allows tubes to stand in a near upright (vertical) position at rest.

The new DVS Adventure is a water vapor sorption analyzer that measures sorption and desorption isotherms over a broad range of humidities and temperatures. It offers unprecedented temperature stability and humidity performance. It provides valuable information about the interactions of a sample with water vapor that is critical for the development of new materials and processes. For example, in many industries, water sorption properties of raw materials are considered as key parameters in determining their storage, stability, processing and application performance.

Seafoam Dual Twin Foam Test Baths are a pair of highly transparent water baths for detecting undesirable foaming characteristics in lubricating oils, which could cause inadequate lubrication, overflow and cavitation.
The instrument comprises a high temperature (normally 93.5C) and a low temperature (normally 24C) bath, each with the capacity to hold four 1000ml graduated glass cylinders.
Each bath assembly comprises an inner glass bath contained in a polycarbonate safety vessel, a top mounted thermostir unit. Please note that DigiFlow mass flowmeters (14012-0) or glass flowmeters (14011-2) are required for testing, these are supplied separately and should be specified at the point of order.
The bath has integral back-lighting with an opaque reflector which aids sample visibility and foam measurements. In addition, the low-temperature bath has a cooling coil for use when the laboratory ambient temperature exceeds the required bath temperature, and two air normalising coils to cool the air emerging from the high-temperature bath test cylinders prior to passing to external volume meters

TheAvCount2portable particle counter determines the particle distribution in a liquid sample, whether checking the quality of fuel, filter systems or in service lubricants.

Precise and reliable
Simple operation
Portable
Particle count and cleanliness code

TheAvCount2particle counter has a large LCD touchscreen display with a simple press to start control for ease of use.

15 test methods are preset within theAvCount2with particle counting results delivered fast.

The compact design of AvCount2 makes it ideal for use in the laboratory, whilst its portable build suits the production line or portable test applications.

TheSeta PM-93is a fully automated Pensky-Martens Closed Cup Flash Point Tester which combines strict method conformance with the latest control technology and safety systems to provide the next generation of flash point instruments.

An intuitive graphical user interface and 8.4 SVGA colour touch screen operation provide unparalleled ease of use with a real-time display of test progress. Test profiles, operator names, test methods and storage of unlimited results are provided through the embedded operating system. Test results can be emailed, saved to a memory stick, output to LIMS or produced in hard copy with the printer option.

Setavap3 provides reliable, precise and fully automated vapour pressure analysis.
Integrated shakerSimple operationMinimal biasRobust and compact design
With a colour touch screen, the Setavap3 provides a clear user interface to guide the operator through the menu system and simple operator sequence.
For precise results, the minimum dead volume design eliminates sample carryover, it is suitable for high ethanol content fuels. A fully automated test sequence removes possible operator bias.
Results are stored in a 16GB internal memory which can be viewed on the screen. For data management and analysis, results can be saved directly to a USB memory stick, LIMS compatibility and printing is provided via Ethernet or Serial Ports.

The HIGHLIGHTS

SETSYS Evolution is the standard for high-performanceTGA, TG-DSC and TG-DTA application. It is based on a complete modular thermal analysis platform forTGA, DTA, andDSCSimultaneous TGA/DTA and TGA/DSCDilatometry/TMAThe key to the SETSYS TGA-DTA/DSCis Setarams unique symmetrical balance, a highly robust and exible furnace con?duration offering unique performance and the lowest operational costs of any system available.The SETSYS can be con?figured to operate up to 2400C and also use controlled humidity, vacuum, and highly aggressive atmospheres.

http://www.setaram.com/setaram-products/thermal-analysis/differential-scanning-calorimetry-dsc-differential-thermal-analysis-dta/setsys-evolution-dtadsc