LIFECO

Dubai, United Arab Emirates

• 1000 Point Address Monitoring
• LCD Screen Display
• Up to 30 Repeater Panels per System
• Easy Installation (Wall-mounting)
• Small Size
• User Friendly
• 4-wire connection
• Low Power Consumption
• LED Status Indicators
• Internal Sounder with Silence Button

The LF-6150 Repeater Panel is responsible for replicating fire and trouble information of a specific region from the Fire Control Unit. The device can monitor the alarm or the trouble state of 4 loops with up to 508 addressable points at most and display its information. Fire alarm and Fault alarm LEDs are provided to indicate the status of the monitored devices and the communication between the repeater and the Main Control Unit.

• UL 864 9th edition Listed
• 2 loop (LE-FN-2127 Series) or 4 loop (LE-FN-4127 Series) versions
• Analog design using LIFECOs advanced DCP protocol for fast and robust communication
• Up to 127 sensors & modules, plus 127 analog sounder bases, for a total of 254 points possible per loop
• Uses standard wire, no shielded or twisted pair required on SLC loops
• Supports Class B (style 4) and Class A (style 6 or 7) SLC loops
• 4 on board Class B (style Y) NAC circuits rated at 2.5 Amps each
• Programmable sensitivity levels per device & automatic day/night sensitivity modes
• Automatic daily calibration & drift compensation routine
• Large 8-line x 40-character LCD display (320 char.)
• Dual RS-485 bus for panel network
• 2 built-in RS-232 interfaces for programming via a PC and serial printer interface
• 5 on board programmable Form C relays rated at 1 amp at 30VDC (Fire1, Fire2, trouble, supervisory, aux.)
• 500mA of auxiliary power available rated at 24 VDC
• Loop Explorer Windows configuration utility
• 500 network wide software zones
• Network Capability of up to 64 panels
• RS485 slave bus for expansion up to 32 LE-FN-4127-IO boards or up to 15 LE- FN-LCD-S serial annunciators and up to 17 LE-FN-4127-IO boards
• Auto-learn feature
• Fire Drill test function
• Walk Test function
• Alarm Verification feature
• Operates on 120VAC or 240VAC input voltage
• Powerful & versatile Cause & Effect programming (up to 500 maximum, network wide) including:
• Cause & Effect action
• Disable function configuration
• Test mode configuration

The EAGLE SERIES control panel is an analog addressable fire alarm panel containing 2 or 4 SLC loops with each loop supporting 127 devices of any combination (sensors or modules), and 127 analog sounder bases, for a possible total of 254 points.

Communication between devices is transferred through standard cable (shielded or twisted pair is not required). Each panel includes a 5.25 amp power supply and has 4 on board NAC circuits. An RS-485 bus provides communication to the panel network, while the RS-232 interface allows the convenience of programming via a PC.

The system will support a variety of LIFECO devices: photo, ion and heat sensors, which contain a unique, patented sensor design incorporating automatic drift compensation and day/night sensitivity mode. Additional devices include contact monitors, relay controllers, supervised auxiliary output and short circuit isolator modules. In addition, interfaces to conventional detection systems can be established by using a conventional zone-monitoring module.

The Loop Explorer Windows Software interface provides the installer with fingertip access to installation programming and diagnostic tools.

An Auto-learn feature offers the convenience for quick start applications. Add to this a reputation for high quality and dedicated service makes this an exceptional product both in performance and value.