Write a Review
Our Products
Leading Manufacturer, Supplier & Retailer of Water Proofing Sheets (EPDM).
ZENA-SEAL (ZSWP100)is a water proofing membrane developed by Zenith Rubber. The rubber membrane has 100 % EPDM polymer content making it an ideal choice for the water-proofing of roofs, swimming pools, foundations for civil constructions, soak pits for animal feed, gobar gas plants, canals, etc. With a life that spans 20 years ZENA-SEAL (ZSW100) is the best choice for waterproofing applications.
ZENA-SEAL (ZSWP100)is produced in accordance to ASTM D4637 and ASTM 6134. The sheet conforms to all requirements for non-reinforced black EPDM rubber sheet for use in waterproofing applications.
ZENA-SEAL (ZSWP100)single ply black membranes are light weight and have exceptional long lasting elasticity permitting the materials to withstand Building movement, Expansion - Contraction of Building surfaces, High resistance to Ozone and weather as they are known as Crack-less Rubbers, Low Specific gravity - lightest among all rubbers, Widest Temperature range from - 50C to + 150C, Excellent Steam and Water Resistance.
|
PROPERTIES |
TEST METHOD | SPECIFICATION |
| Tolerance on Nominal Thickness,% | ASTM D 412 | 15/-10 |
| Color | Visual | Black |
| HARDNESS | ASTM D2240 | 65±10 Sh A |
| TENSILE STRENGTH ( min ) | ASTM D412 | 90KGS. CM2 |
| ELONGATION AT BREAK ( min ) | ASTM D412 | 350% |
| TEAR RESISTANCE kg/cm | ASTM D624 method C | 30 |
| Drop in physical properties - Ageing | ||
| After 100°C for 600 Hrs | ||
| Tensile Strength min. | ASTM D - 412 | 10% |
| Elongation ( % ) | ASTM D - 412 | 30% |
| Tear resistance (kg/cm) | ASTM - 412 | 15% |
| Linear dimensional change max. % | ASTM D - 1204 | +/- 2% |
| Ozone Resistance: On exposure to 100 ppm and Ozone in air 96 hrs.@ 40 C at 20 % strain | ASTM D 1149 | No crack |
| Glass transition Temperature : | ASTM D - 746 | -55 |
| Resistance Water absorption, after 7 days immersion in 70° C, % change in mass | ASTM D 471 | 4.0 |
| Compression set, 22 Hrs. at 70°C | ASTM D 395 | 24% |
| Specification No: ZRWP100/1 | Rev. No.: 00 | Rev. Date: 00 |
|
PROPERTIES |
TEST METHOD | SPECIFICATION |
| Tolerance on Nominal Thickness,% | ASTM D 412 | 15/-10 |
| Color | Visual | Black |
| HARDNESS | ASTM D2240 | 65 ± 10 A |
| TENSILE STRENGTH ( min ) | ASTM D412 | 90KGS.CM2 |
| ELONGATION AT BREAK ( min ) | ASTM D412 | 300% |
| ABRASION RESISTANCE ( max ) | ASTM D5963 | 250 mm3 |
| COMPRESSION SET (70° C/24 hrs) (max) | ASTM D395 Method B | 24% |
| TEAR RESISTANCE (Angular) min | ASTM D624 method C | 30 |
| Resistance to Heat Aging | ||
| Properties after 166 hrs @ 115°C | ASTM D - 573 | |
| Tensile Strength min. | ASTM D - 412 | 85kgs. /Cm2 |
| Elongation ( % ) | ASTM D - 412 | 210 |
| Linear dimensional change max. % | ASTM D - 1204 | +/-1 |
| Brittleness temperature °C | ASTM D 746 | -45 |
| Resistance water absorption, after 166Hrs. Immersion @ 70° C | ||
| % change in mass | ASTM D 471 | 4.0 |
| Water Vapor Permeability Max. per-mills | ASTM E 96 | 3.5 |
| Specification No: RSWP100/2 | Rev. No: 00 | Rev. Date: 00 |
Deni Mathai (M/s Zenith Rubber Industries Middle East Llc)
Al Hamra Industrial Area,
Ras Al Khaima, UAE
Share us via
