Micron Ventures Limited

DUBAI, United Arab Emirates

DC309 Cable Coating is an intumescent coating for internal application to limit flame spread effectively, when fire occurs, the coating will rapidly intumesce to forma foam carbon char layer to prevent the fire propagation. DC309 cable coating is water base, asbestos-free and environmentally friendly. Very effective for protecting wire and cable in reducing toxic gas and smoke emitting in a fire.

Coating for protection of grouped electrical, data or communication cables on cable trays or racked cables in industrial building.

Water based.

Excellent resistance to fire consumption.

Flexible with good adhesion; Does not peel off.

Intumescence when heated.

Does not halogenate.

No asbestos and solvent.

Minimum 1 year shelf life.

The-928 Intumescent Coating is designed to prevent the calamity from fire, has excellent flame resistance and thermal insulation property. This is a thin film coating that forms an insulating layer, noncombustible thermal barriers preventing flame and heat from contacting substrates, when exposed to fire/heat (high intumescent type)

Used as interior paint for structural steels.

Used to increase the steels fire rating for 1 hour.

Clean the surface of steels before painting, all surfaces must be free of rust, grease, oil, moisture or other contaminants.

Operating condition: 5 35C, up to RH 85%.

Apply by brush, roller or airless spray.

If necessary, the paint can be diluted by solvent.

Premix it well with hand mixer before application.

Do not mix with other paint.

Store the paint 5-38C indoors.

Finish: flat.

Density: 1.40.1g/ cm3

Viscocity: 20000 40000cps (at 25C); adjustable.

Solid content: 71 3%.

Color: White.

Used Solvent: Isoamyl acetate (banana oil) or Xylene.

Operating Temperature: 5 35C.

Dry to touch: 3 hours.

Flash point: 27C.