Middle East Laboratory Furniture (MidLab)

ABU DHABI, United Arab Emirates

BROEN UniFlex PREMIUM fittings for water are designed for laboratory use. The operation and the configuration of the fittings are highly adapted to the requirements of a modern laboratory. The fittings are surface treated with BROEN POLYCOAT powder coating, which is highly resistant to most chemicals, UV fading and heat (for more information please refer to BROEN POLYCOAT brochure.)

Specifications:

Handle: PlasticMedia indication: according to EN13792Headwork: Diaphragm typeOpening/closing function: 1 1/2 x 360Temperature range: 0-90CMax. working pressure: 10 bar / 147 psiTest pressure: 1 x working pressure

Tof Laboratory fittings for water are manufactured conformity with international regulations. Tof Laboratory fittings are made in brass (P-Cu Zn 40 Pb 2 UNI 5705-65) and have an epoxid-covering in ash-grey according to RAL 7001. On demand, it could have an inside chemical nickel treatment, granting an higher corrosion resistance and avoiding any contamination of fluid.

Specifications:

Temperature range: -30C to +150CChemical resistance: very rare alterations.Test pressure: 1 x working pressurePea-souper test: no alterationsKesternich test: no alterations

Broen Uniflexfittings for burning gases can be used for natural gas (G), liquefied petroleum gas (LPG) as well as low pressure bottle gases such as:- propane- butane- methane- acetylene- hydrogen

These gases are typically commercially manufactured and sold to be used in applications within:- laboratory and instrumentation- chemical and petrochemical industry- semiconductor industry- welding, etc.

Specfications:

Handle: Plastic with media indication according to EN13792Hose nozzle: Metal, fixedHeadwork: Ceramic, press/turnOpening/closing function: 90Max. working pressure: 7 bar / 102 psiAllowable test pressure after installation:10 bar without function of the valveMaterials With Media Contact:Metals: Brass, NBR (rubber hose)Sealing: Nitrile (NBR)Lubricant: Mineral oil based

Tof Laboratory fittings for gas are manufactured conformity with international regulations. Tof Laboratory fittings are made in brass (P-Cu Zn 40 Pb 2 UNI 5705-65) and have an epoxid-covering in ash-grey according to RAL 7001. On demand, it could have an inside chemical nickel treatment, granting an higher corrosion resistance and avoiding any contamination of fluid.

Specifications:

Temperature range: -30C to +150CChemical resisitance: very rare alterations.Test pressure: 1 x working pressurePea-souper test: no alterationsKesternich test: no alterations