My ExportersIndia

For Buyer

For Seller

For Help

RE

Ruby enterprises
location Ruby enterprises, United Arab Emirates

Write a Review

Our Product / Services

  1. Milking Machine Parts

    1 Products available
  2. Pumps, Pumping Machines & Parts

    1 Products available
  3. Fancy Jewellery

    1 Products available
  4. Storage Tanks

    1 Products available
  5. PVC, HDPE, FRP & Plastic Pipes

    1 Products available
  6. Clean Room Equipment

    1 Products available
  7. Heat Exchangers

    1 Products available
  8. Reverse Osmosis Plant

    1 Products available
  9. Others Products / Services 2 Products / Services available

Products / Services

Our product range contains a wide range of Process Piping and SS Daiphargam Valve FDV

Pendants

Pendent is designed to facilitate various services (WFI DM water piping loops, electrical cabling, steam chilled water lines, nitrogen LPG lines, process media lines, compressed air line ) to be brought into the sterile area or working area in a close nesting manner, so as to provide easy access to services.The Pendent is designed to take mainly electrical cabling, Water, Steam and gases housed in four segments of the Pendent, isolated and independent of each other. To maintain the sterile parameter of a given area pendent enters by penetrating the false ceiling in to the area. Pendent is sealed on the outer edge of the bottom end entering the sterile area. The internals are sealed by means of rubber packing and silicon sealant at the top end after all services are installed. The bottom end is also sealed in a similar manner. This prevents cross contamination. Pendents housing can be dismantled easily by disconnecting utility piping and removed by opening of the clamp giving easy access to the internals.
View Complete Details

SS Hose Flexible Pipe

Ruby Enterprises The wide range of flexible hose pipes that we offer is manufactured from high grade material, which is procured from dependable vendors. The authenticity of the procured material ensures the longer working life of these pipes. These pipes are available in different sizes, lengths and end fitting configurations. Widely acclaimed for sturdiness and high resistance against corrosion, our flexible hose pipes are available in standard as well as customized specifications.
View Complete Details

Storage Tanks

Plain Storage Tanks. (for DM, Purified, RO Water)Jacketed Storage Tanks. (for WFI)We are engaged in manufacturing Water Storage Tanks of SS-316L, esp. for pharma industries. These are carefully designed & Mfg. with special welding technology. Options of 'Plain' tanks & 'Jacketed' with Insulation & 'Cladding'.Storage Tanks are stills used to store Product Water (Purified Water or WFI Water). These tanks have cGMP design as per ASME sec VIII Div-2 with both sides Torrespherical dished end for 100% drain ability, with appropriate Triclover nozzles for utilities. Storage tanks are vertical type with legs, can be rested on the floor. Storage Tanks are designed as per the tank turn over & tank change over to optimize the generation equipments. Storage tanks are used for sanitation of the piping by thermal or chemical media, which in turn sanitize the same. Material used for Storage tank is SS 316L for contact parts & SS 304 for non-contact parts. Storage tanks are closed type and it breathes through the vent filter.
View Complete Details

Clean Room Furniture

Ruby Enterprises offer Stainless Steel Clean Room Change Room Furniture including Apron Cabinets, Shoe Racks, Dies & Punches Cabinets, Lockers, Sinks, Sink Tables, Hand Wash Systems, Racks, Tables, Chairs, Cross-over Bench, Multi-purpose Trolleys, Dust bins, Tubs and custom designed furniture. All furniture is fabricated from SS 304SS 316 duly ground and buffed to pharma standards.
View Complete Details

Heat Exchangers

Heat exchangers are basically stills, which are designed as per ASME sec VIII DIV-2, as the heat transfer area is important factor. These are sanitary type with 100% drain ability; it may double tube sheet type or shell & tube type. There are two sides primary & secondary side, always primary side is utility and secondary side is product. All the product contact parts are SS 316L and utility contact parts are SS 304. Hot type Heat exchangers are basically used for sanitation of DM, RO, and Purified water line when the Storage tank is not jacketed. Cold type Heat exchangers are used when the recirculation loop is hot but the formulation requires cold water. These are economical as the surface area can be increased or decreased as per design considerations. These are not recommended by the regulatory authorities as they stills when not in use or by-passed. The product side has Triclover ends and the utility sides has flanged end or screwed end or as per requirement. Plate types Heat exchangers are also available but the regulatory authorities do not recommend them as the have dead legs or dead pockets, and even the sealing gaskets are not food grade.
View Complete Details

Process Piping

Ruby Enterprises undertakes design, supply, installation and commissioning of fully automated WFI and Purified water loops as per ASME BPE and ISPE Volume IV, pure steam lines, utility and product transfer systems ensuring that the final product is of the highest quality. The piping systems are supported by validation documentation and necessary statutory approvals.Inline with needs of the project, piping & structural fabrications of SS 304, 304L, 316, 316L, or any other material are undertaken following with the ASME or ASME BPE codes & GEP. Custom-built process piping is designed & laid out using SS 316 L pipes (RA less than 0.3), electro polished internally. The use of sophisticated orbital welding technology has played a key role in improving piping system quality because of good inner weld bead & repeatability of the process.
View Complete Details

Cip-Sip System

Clean-In-Place (CIP) Steam -In-Place (SIP):Clean-In-Place (CIP) Steam -In-Place (SIP) technology offers significant advantages to manufacturing facilities from efficient cleaning of process equipment & piping at lower costs to improved product quality CIP Systems are fully integrated incorporating tanks, pumps, valves , spray cleaning devices, , heat exchangers, piping & controls without the need to disassemble all or part of the system, significantly reduces cleaning costs and minimizes the handling of chemicals to provide a safer environment for plant personnel. CIP CYCLE:The CIP process involves a sequence of cycles that includes an initial and final drain step, a pre-rinse and post-rinse step. The CIP process may include a sanitize cycle to reduce the levels of bacterial contaminants This cycle uses aqueous solutions of strong oxidants such as hydrogen peroxide, ozone and chlorine containing compounds.
View Complete Details

SS Sanitary Pumps

Pumps are used to transfer product from one place to another by means of piping or for recirculation in distribution systems. These are located after Storage tanks for transfer or for recirculation of DM, Purified, RO, and WFI Water Distribution System. It plays very important role for distribution loops as the tank turn over which is one of the factor is maintained. These pumps have cGMP design with 100% drain ability. Mechanical seals preferred are Tungsten Carbide vs Tungsten Carbide or Silicon Carbide vs Silicon Carbide for Pharmaceutical applications. Inlet & Outlets nozzles are Triclover end. Centrifugal pumps with drain valves for easy draining are available on request.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us