Chennai, Tamil Nadu, India
Our Products
The Front & Rear Bearing Axles are devices used to allow an Axle to spin without resistance, wear and seizure.
The Front Bearing Axles and Rear Axles bearing are typically comprised of roller-type bearings. The common Axle bearings provide a wider contact surface than the usual ball bearing can provide.
The bearing Axles are lubricated by the Differential oil. The Axle bearings differ from a front wheel Axle bearing that is commonly packed with high-temperature bearing grease.
The Axle bearings are located near the end of the Axle tube in what is known as a bearing cup. A rumble or grinding noise coming from the wheel area is often the first indication that a bearing is needing to be replaced.
the bearings are damaged there is also a possibility that there can be severe damages to the vehicles also.
Rear Axle bearing size is considered to be bigger.
AEC provide many customers with the finest quality of Axle bearings for various Earthmover vehicles and other vehicles too.
AEC also uses the finest quality of SG Iron for manufacturing of the Axle bearings and provide customers with the precise dimensions according to their needs.
The sizes of the Axle bearings can Manufactured according to the Customers requirements.
A Cam Shaft LH and RH has one or more Cams attached to it.
This is generally connected to the Piston which transmits the power.
The power is produced by the internal combustion engine.
Some engines rely on a single Camshaft per cylinder bank, which is known as a single overhead Camshaft (SOHC).
Most engines are driven by a two Camshafts per cylinder bank arrangement (one camshaft for the intake valves and another for the exhaust valves) such Camshaft arrangement is known as a double or dual overhead CAM (DOHC).
Thus, a V engine, which has two separate cylinder banks, may have four Camshafts (colloquially known as a quad-cam engine).]
We AEC produces camshafts or Earthmovers which have only one cam at one end and the other end is machined with grooves.
This is done with extreme precision for distribution of power through the wheel.
We use SG Iron for the Manufacturing of the Camshaft RH and Camshaft LH.
These Camshaft RH and Camshaft LH are used in Earthmover. One of our highly esteemed customer is Caterpillar, other companies include Tafe (Earthmovers).
