AEC CNC PRIVATE LIMITED Chennai, Tamil Nadu

The Elbow is used to provide support to huge Pipelines. These Elbows are usually seen with a 90-degree bend to support two different Pipelines are different angles.   There are various advantages of using the Elbow in your piping system rather than bending around with your piping.   The elbows are   1) Flexible – can be laid in concrete structures as well Suitable for temporary solutions.   2) All water-bearing parts highly corrosion resistant.   3) Dead space free pipe connections with full cross-section.   4) Replacement of the inner pipe is possible without damaging wall panels and tiles.   5) Low noise, meets the tightened noise protection requirements.   6) Versatile installation and assembly aids available.   AEC provides the best Elbow product. It is manufactured with high precision and care. The material used for the manufacturing process is the finest and chosen after a lot of designing process and planning.   The manufacturing process is done high-quality machines and products are always checked for high precision and perfection.

Planetary Gearbox works on Planetary motion principle with various parts and stages.   Accordingly, each stage of the Planetary Gearbox consists of central sun gear meshing.   The gear is accurately positioned with three planet gears around it. The purpose of this is to mesh with the internal teeth of the outer ring gear. Normally, the Ring gear is stationary and forms the part of  the housing. Therefore the input is given to the Sun gear and output is derived from the three planet gears through a planet carrier.   However, out of these three gears anyone can be held stationary. The second is driven by input and the output can be derived from the third member. Due to this flexibility, Planetary Gearboxes have a large variety and innumerable applications.     We manufacture Planetary Gearboxes for various customers across the world. We Manufacture Planetary Gearbox with pure and finest quality of SG Iron and give perfect finishing and precision.

The Adaptor Valve Bases are pure Aluminium material which is used to control the flow pressure of the liquid in the Petroleum industry.   These Valve Bases are most effective when Manufactured with Aluminium material.   It is mandatory to control the flow of the liquids In these Valves. Valves are one of the most important parts. Therefore, there can be various service and repair issues with the valve when it has not been monitored properly.   Since these Bases are made of Aluminium It is really wise to use these Valve Bases. They should be used for the monitoring and controlling the pressure of the Valves.   We provide our customers with customisable sizes according to the requirements of the customers.   There are various sizes and dimensions available for the Adaptor Valves. We Manufacture the Adaptor Valve Bases with high quality and finest Aluminium HE30.   We also make sure that the end product is perfect and have been checked with our experts.

Globe & Gate Valves are linear motion Valve and are primarily designed to stop, start and regulate flow.   Conventional Globe Valves may be used for isolation and throttling services.   Although these Valves exhibit slightly higher pressure drops than straight through valves (e.g., gate, plug, ball, etc.), they may be used where the pressure drop through the Valve is not a controlling factor.   We here at AEC use high quality and precision CNC machines for the manufacturing of Globe Valves which are of two types with Flange and without Flange. AEC are currently machining and manufacturing ½”, ¾”, 1”, 1½”, 2” and 3” (inch) globe valves of classes 150 and 300.   We use various materials for Manufacturing but the most commonly used are 105, LF2, F316L and Steel Forged Valve.   We have various consumers throughout the world and few of them are Flowserve, Caterpillar etc.

The Rear Differential covers are to protect the intricate moving parts of your Differential.   An Aluminium Differential cover is a perfect answer, adding an extra layer of protection to your vehicle’s underside. It is needed to hold the rear oil and it also adds to the real strength of the vehicle.   The main reason why you need to add extra cover to you Differential rear is because the company rear cover is thin and it does not have the capability to take a strong hit.   When your vehicle is hit with the company Rear Differential cover it will cause damage. And there are high chances that the vehicle will either get a huge dent in it or tear a hole in it or it can cause all of the fluid to drain out. AEC produces Aluminium Rear Differential covers which are exactly what you are looking for.   If you want to protect the Rear Differential of your vehicle from very severe Rear damages from rock crawling or other rough uses.   We provide our customers with different sizes according to their vehicle sizes and also distribute it to various companies.

The Screwed Seats are used majorly in the Valve industries for various applications.   The Valve uses the Screwed Seats in the application of switching the Valve on and off.   Therefore the process of switching the Valve on and off is basically not possible without the help of Screwed Seats.   Of course, they are also are important in monitoring the flow of liquids or gasses through the Valve.   They are Manufactured with high precision and under the supervision of our experienced and expert employees. We use SS316L for the Manufacturing of this material.   We have many customers in the Valve industry depended on us for this product. Few of the reputed companies which trust us with the Manufacturing of this product are Flowserve, Caterpillar.