Karnal, Haryana, India
Verified
Add Review
Our Products
Details :
Specifications
| Description | AGSSG - 125 | AGSSG - 150 | AGSSG - 175 | AGSSG - 200 |
|---|---|---|---|---|
| Gear Box | Single Speed | |||
| No. of blade | 30 | 36 | 42 | 48 |
| No. of flange | 6 | 7 | 8 | 9 |
| Rotor type | Seamless pipe | |||
| P.T.O RPM | 540 | |||
| Type of side drive | Gear | |||
| 3-Point Linkage | CAT - I & CAT-II | |||
| Gear box overload Protection | Shear Bolt | |||
| Width of cut (cm) | 125 | 150 | 175 | 200 |
| Weight (kg) | 320 | 370 | 420 | 470 |
| Tractor Power ( HP) | 35-40 | 40-45 | 45-50 | 50-55 |
Details :
Specifications
| Description | AGHTT- 5 | AGHTT- 10 |
|---|---|---|
| DIMENSION | 3050 x 1800 x 500 mm (L x W x H) | 3350 x 1950 x 600 mm (L x W x H) |
| FIRST CHASSIS | 150 x 75 mm M.S. Channel | 200 x 75 mm M.S. Channel |
| SECOND CHASSIS | 100 x 50 mm M.S. Channel | 125 x 65 mm M.S. Channel |
| SUPPORT CHANNEL | 75 x 40 mm M.S. Channel | 75 x 40 mm M.S. Channel |
| FLOOR PLATFORM | 4 mm thickness | 5 mm thickness |
| SIDE WALL | 3 mm thickness corrugated / plan | 3 mm thickness corrugated / plan |
| FRONT DOOR | Bolted for easy removable | Bolted for easy removable |
| SIDE & REAR DOORS | Two side doors & one rear door. Both drop down & removable | Two side doors & one rear door. Both drop down & removable |
| WHEEL RIM | Heavy duty double plate (Folding) | Heavy duty double plate (Folding) |
| NO. OF TYRES | 2 nos. of size 7.50 x 16 (9.00 x 16 optional) | 2 nos. of size 9.00 x 20 (1000 x 20 optional) |
| NO. OF AXLE | One | One |
| PAINTING | One cot Red oxide & two cot PU paint | One cot Red oxide & two cot PU paint |
| HYUDRALIC JACK (FOR TIPPING) | 10 ton capacity heavy duty double stage | 15 ton capacity heavy duty double stage |
| HITCH BEAM | 125 x 125 mm square | 125 x 125 mm square |
| HITCH | Forging for easy transportation | Forging for easy transportation |
| AXLE | 75 mm square (Water proof) | 100 mm square (Water proof) |
| AXLE BEARING | Taper roller | Taper roller |
| HUB | Super steel | Super steel |
| REQUIRED POWER (HP) | 35 HP & Above | 45 HP & Above |
| APPROX. WEIGHT(WITHTYRE) | 1200 Kg. | 1700 Kg. |
Details :
Specifications
| Description | AGHTTDAX - 8 | AGHTTDAX - 10 |
|---|---|---|
| DIMENSION | 3050 x 1800 x 500 mm (L x W x H) | 3350 x 1950 x 600 mm (L x W x H) |
| FIRST CHASSIS | 150 x 75 mm M.S. Channel | 200 x 75 mm M.S. Channel |
| SECOND CHASSIS | 100 x 50 mm M.S. Channel | 125 x 65 mm M.S. Channel |
| SUPPORTCHANNEL | 75 x 40 mm M.S. Channel | 75 x 40 mm M.S. Channel |
| FLOOR PLATFORM | 4 mm thickness | 5 mm thickness |
| SIDE WALL | 3 mm thickness corrugated/plan | 3 mm thickness corrugated/plan |
| FRONT DOOR | Bolted for easy removable | Bolted for easy removable |
| SIDE & REAR DOORS | Two side doors & one rear door. Both drop down & removable | Two side doors & one rear door. Both drop down & removable |
| WHEEL RIM | Heavy duty double plate (Folding) | Heavy duty double plate (Folding) |
| NO. OF TYRES | 4 nos. of size 7.50 x 16 (9.00 x 16 optional) | 4 nos. of size 9.00 x 20 (1000 x 20 optional) |
| NO. OF AXLE | Two | Two |
| PAINTING | One cot Red oxide & two cot PU paint | One cot Red oxide & two cot PU paint |
| HYUDRALIC JACK (FOR TIPPING) | 10 ton capacity heavy duty double stage | 15 ton capacity heavy duty double stage |
| HITCH BEAM | 65 x 65 mm | 65 x 65 mm |
| HITCH | Forging for easy transportation | Forging for easy transportation |
| AXLE | 75 x 75 mm square (Water proof) | 100 x 100 mm square (Water proof) |
| AXLE BEARING | Taper roller | Taper roller |
| HUB | Super steel | Super steel |
| REQUIRED POWER (HP) | 35 HP & Above | 45 HP & Above |
| APPROX. WEIGHT(WITHTYRE) | 1700 Kg. | 2000 Kg. |
Seed Drill is used for sowing different crops such as wheat, barley, maize, peas, black grams, pulses etc. in prepared (tilled) fields without fertilizer. The machine is available in side wheel driving mechanism & central wheel driving mechanism.
Specifications
| Description | AGSCFD - 9 | AGSCFD - 11 | AGSCFD - 13 |
|---|---|---|---|
| No. of Tines | 9 | 11 | 13 |
| HITCH TYPE | Category l & II | Category l & ll | Category l & ll |
| OVERALL WIDTH (INCH) | 72" | 87" | 102" |
| SEEDING WIDTH | 67" | 82" | 97" |
| (ROW SEEDING) (INCH) | |||
| TYPES OF TINE | Shovel Type | ||
| ROW SPACING (INCH) | 7.5" | ||
| SEED CAPACITY | 50 Kg. | 80 Kg. | 100 Kg. |
| FERTILIZER CAPACITY | 50 Kg. | 80 Kg. | 100 Kg. |
| SEED METERING DEVICE | Nylon Type Fluted Roller | ||
| FERTILIZER METERING DEVICE | Nylon Type Fluted Roller | ||
| METERING DEVICE DRIVE | Metering Device Drive is from front mounted ground wheel chain | ||
| GROUND WHEEL | One 15 inch diameter spiked roller with spring to maintain contact with ground. 1 , | ||
| SEED DRILLING DEPTH (INCH) | 50 mm to 100 mm | ||
| APPROX WEIGHT | 310 Kg. | 360 Kg. | 410 Kg. |
| Power HP | 35 & Above | ||
Details :
Specifications
| Description | AGRSSQ - 6 | AGRSSQ - 8 |
|---|---|---|
| Gear Box | Single speed 540 RPM | |
| Frame Sheet ( mm) | 10 gauge | 10 gauge |
| Main Frame ( mm) | 50 x 6 angle | 65 x 6 angle |
| 3 Point Linkage | 65 x 16 flat | 65 x 16 flat |
| Wheel Diameter | 2 / optional | 2 / optional |
| Depth Control | 25 to 200 mm | 25 to 200 mm |
| PTO Shaft | with shear bolt | with shear bolt |
| Length ( mm) | 1900 | 2500 |
| Width ( mm) | 1800 | 2500 |
| Cutting Width ( mm ) | 1750 | 2350 |
| Weight ( kg) | 325 | 410 |
| Power ( HP ) | 35-50 HP | |
Post hole digger suitable for 18 to 75 HP WITH 540 RPM , 12" , 18" 24" 36" Hole diameter augur Post hole digger suitable for 18 to 75 HP WITH 540 RPM 18" 24" Hole diameter augur with 3 ft to 9 ft depth
Specifications
| Description | AGPHD |
|---|---|
| Frame | Seamless heavy duty Tubular |
| Hitch | CAT - I & CAT - II |
| Gearbox | Compatible with 50 HP max |
| Output shaft | 55 mm |
| PTO rpm | 540 |
| Protection device | Shear Pin |
| Auger length | 1000 mm |
| Auger Size | 12"/18"/24"/36" |
| Auger blade | Carbide bits |
| Auger Point | Replaceable |
| Weight ( kg) | 325 |
| Power ( HP ) | 1. Hole Digger suitable for 18 HP to 75 HP, with 540 PTO RPM 12", 18", 24", 36", hole Dia. Augurs. 2. Hole Digger suitable for 50 Hp to 75 Hp, with 540 PTO RPM 18", 24", inch augur with 3Ft. to 9Ft. depth for commercial purpose. |
Details :
Technical Specifications
| Description | AGMBP36-2 | AGMBP36-3 | AGMBP36-4 | ||
|---|---|---|---|---|---|
| Tractor Power(HP) | 35-40 | 55-60 | 80-90 | ||
| Frame (mm) | 80X80X7mm Box | ||||
| Drawbar Square | 50mm Solid Square | ||||
| Tyne | 36mm Profile Cut Single Piece | ||||
| Length (mm) | 1300 | 1880 | 2460 | ||
| Height (mm) | 1066 | ||||
| Blade (mm) | 10 | ||||
| Moulde Board (mm) | 8 | ||||
| Bar Point (mm) | 40x25 Bar (Forged) | ||||
| 3- Point Linkage Lever and Connecting Rod (mm) | 65x16mm Flat & 32mm Square Rod | ||||
| Width of Cut (mm) | 610 | 910 | 1210 | ||
| Depth of Cut (mm) | 350 | ||||
| Weight (approx.) | 225 kg | 340 kg | 440 kg. | ||
Long lasting blades (L & C Types) made out of special quality wear resistant steel. Sealed bearings prevent moisture/mud entry. High quality drive shaft. Well shaped adjustable rear trailing board. Fuel expenses saving can be to the tune of 20 to 40%. It can immediately prepare the soil, the soil moisture of previous crop does not go waste. Pudding in wet fields is done smoothly, quickly & efficiently
Technical Specifications
| Description | AGRT – 150 | AGRT – 175 | AGRT – 200 | AGRT – 225 | AGRT – 250 | AGRT – 275 | |
|---|---|---|---|---|---|---|---|
| Tractor Power (HP) | 40-45 | 45-30 | 50-60 | 60-70 | 70-80 | 80-90 | |
| Tillage Width | 1500 mm | 1750 mm | 2000 mm | 2250 mm | 2500 mm | 2750 mm | |
| Gearbox | Multi Speed (4 Speed – Optional ) | ||||||
| Side Transmission | Gear Drive | ||||||
| Type of Blade | L & C Type | ||||||
| No. of Flanges / Blades | 7 (36) | 8 (42) | 9 (48) | 10 (54) | 11 (60) | 12 (66) | |
| Gearbox Overload Protection | Shear Bolt | ||||||
| Weight (approx.) | 395 kg | 445 kg | 495 kg | 545 kg | 595 Kg | 676 kg | |
Mould Board Ploughs are designed to work in all types of soils and can be used easily in hard soils and in rocky and rooted areas. Mould Board Ploughs can handle the toughest ploughing jobs with ease. Equipped with special wear-resistant alloy steel blades and bar points.
Details :
Specifications
| Description | AGRMBP - 2 | AGRMBP - 3 |
|---|---|---|
| Total length ( mm) | 2100 | 3000 |
| No. of bottom | 2 | 3 |
| Working width of each bottom ( mm) | 33/350/400 | 33/350/400 |
| Under frame Point clearance (mm) | 600 | 600 |
| Horizontal Suction ( mm) | 10 to 25 | 10 to 25 |
| Vertical suction ( Penetration Pitch) | 10 to 20 | 10 to 20 |
| Working depth (min-max) mm | 200 - 330 (8"-13") ±30 mm |
200 - 330 (8"-13") ±30 mm |
| Working width | 600 mm | 900 mm |
| Penetration Pitch | 620 mm | 620 mm |
| Weight ( kg ) | 450 | 660 |
| Power HP | 50-75 | 80-90 |
