Gearboxes #3804739

Rigid, robust, torsion resistant housing in high quality close grained Grey Cast Iron generously proportioned to ensure proper radiation of any heat generated when Units are operated at their maximum capacity Suitable ribs are placed underneath the bearing seats for strength and the walls are of sufficient thickness to withstand the most severe stresses encountered during operation. On request the housing is manufactured of fabricated construction. Housing in cast steel or fabricated steel can be supplied if required.

AGNEE make helical gearbox one built on modular concept of construction conformation to is standards with respect to sizes, dimensions. This provides economics mass production, comprehensive maintenance of stocks, favorable delivery period and easy of servicing.

Rigid, robust, torsion resistant housing in high quality close grained Grey Cast Iron generously proportioned to ensure proper radiation of any heat generated when Units are operated at their maximum capacity Suitable ribs are placed underneath the bearing seats for strength and the walls are of sufficient thickness to withstand the most severe stresses encountered during operation. On request the housing is manufactured of fabricated construction. Housing in cast steel or fabricated steel can be supplied if required.

The Agnee Pump Jack Helical Gearboxes are widely acceptable and are used in pump jacks for oil (petroleum) exploration from the oil wells.

• The AGNEE Pump Jack Helical Gearbox is made of Close Grain Cast Iron.

• They are rugged, corrosion resistant and absorb shock and vibration.

• The Reducer Gearing is Helical type made from high quality alloy steel, hobbed, case hardened, tempered and surface finish and profile ground to class 10 AGMA quality with a 2.0 Service Factor (Best in the industry). That leads to a very good efficiency and a quiet working condition.

• The shafts are from alloy steel forging or heat treated Bars.

• Bearings are fitted on a ground journal and are taper roller type.

• These are heavy duty units with superior self oiling systems for extended life in the field.

• These units have oil level indicators for easier preventive maintenance.

• The product conforms to the international quality needs.

AGNEE Double Reduction Worm Gearboxes are two stage worm reduction units. A specially designed primary worm reduction unit is integrally mounted on a standard single reduction AGNEE worm gearbox which forms the second stage.

Agnee manufactures Planetary Gearbox for various Industrial applications operated by Electric motor and Hydraulic motor. Agnee providing customers with High Quality, Cost Effective, Power saving, Planetary gear box with wide range of power transmissions. We are manufacturer and exporter of planetary gearbox & geared motor and our gearboxes are being exported on regular basis to various developed and developing nations since long time. So feel free to become a privileged buyer and purchase for the most competitive prices offered by us.

 

Principle:Planetary Gearbox consist of an Internal toothed Ring Gear to which are set 3 Planets mounted on the Planet Carrier engaging also with the Sun Gear (Pinion) and reduced output speed is taken through Planet Carrier and Ring Gear is remain stationary. Output shaft maintaining the same direction of rotation as Input. Salient Features of Planetary Gearbox: High Reduction Ratios, Power Saving, High Efficiency Long Life, Space-Saving Compactness, Higher Overload Capacity, Reliable and Trouble-Free Service, Greater stability, Compact and Co-Axial Sturdy, No-Self Locking Property, Load distribution among planetary gears.

Models Available: Low Backlash Planetary Gear BoxBevel Planetary Gear BoxWorm Planetary Gear Box

 

 

Input Type	Male Shaft, Hollow Input
Output Type	Male Shaft, Hollow Input, Spline Shaft

We manufacture gearboxes and geared motors for mining, rolling mills, conveyors, crushers, cranes, thermal power plants, larger ball mills, mixers, agitators, plastic extruders and fin cooler drives etc.

Industrial Helical Gearbox are usually used in applications involving high shock loads. Industrial Helical Gearboxes may require a larger initial investment, but maintain high efficiency, so they are usually preferred in high load applications.

 

 

AGNEE manufactures and exports Custom made Industrial Gearboxes as per specification, drawing, sample or requirement provided by the customers. Click on the images below to view the details

• Industrial Bevel Helical Gearbox

• Helical Reduction Gearbox

• Worm Gearboxes (Right Angle Gearboxes)

• Bevel Gearbox

• Industrial Planetary Gearboxes

• Shaft Mounted Speed Reducer

Worm Gearbox have Cast Iron Gear Case of streamlined design completely air tight, dust proof and capable of being installed in open without any cover. The Worm Shaft is made of Alloy Steel, duly hardened and tempered. The Worm Wheel is made of Chill Cast Phosphorous Bronze and teeth accurately Generated on Gear Hobbing Machines. They are supported on Extra Heavy Duty Taper Roller anti friction Bearings of ample margin of safety to allow adequate journals as well as thrust loads. Lubrication is effected by splash of oil from the sump. Thus, no special care is required except for occasional oil topping to the required level.

Cycloidal gears are used in pairs and are set at an angle of 180 degrees used to balance the load and are driven by multiple crank shafts to share the load and increase torsion rigidity. Cycloid reducers use rolling elements and a multilobe cam to transmit torque and provide speed reduction. A worm gear is an inclined plane wrapped around a central axle. It is a gear with one or more teeth in the form of screwed threads.

Helical gearbox have been introduced to meet the requirements of today's demanding applications in the medium and heavy-duty sector of the power transmission market. The modular design and construction of the Series H Helical Gearbox offers many engineering and performance benefits including a high degree of interchangeability of parts and sub assemblies. This in turn provides considerable economies of production while maintaining the highest standard of component integrity. Apart from standard range, Helical Gearboxes are also tailor made to suit individual requirement or as per specifications provided. Please feel free to discuss your requirement and we shall be pleased to make suitable suggestions. Gear tooth geometry design combines maximum efficiency with high load carrying capacity and minimal noise generation. Serviceability of the product was key in the design of the Series H Helical Gear Boxes range allowing easy maintenance for long life and reliability, which are synonymous with our field reputation.

Gearbox is defined as a metal casing in which a train of gears is sealed. Gearbox is also called gearhead, gear reducers or speed reducers. They are available in broad range of sizes, capacities and speed ratios. Their job is to convert the input provided by a prime mover into an output of lower RPM and correspondingly, higher torque. Input and output configurations for gearbox include hollow shaft or coupling or bushing. A single input shaft can drive multiple output shafts. The output shafts are usually parallel and in-line. However, some unique configurations exist that allow for offset shafts to be driven at different speeds. Some gearboxes are supplied with a reaction arm. A reaction arm prevents the reducer housing from rotating when there is no base mounts or flanges. Shaft alignment can be parallel in-line, parallel offset, right angle and non-perpendicular angled shafts. Gearbox is intended to be incorporated in a transmission for vehicles, particularly terrain vehicles, preferably driven by an internal combustion engine.

Single Reduction Worm Gear Box - Type Adaptable, Sizes A 40 to A 85

Adaptable Worm Gearbox A 40 Agnee Adaptable Worm Gearbox A 50 Worm Gear Box A 60 Worm Gear Reducer A 75 Worm Reduction Gear Box A 85Worm Gearbox Gear Ratio: 5-1, 10-1, 15-1, 20-1, 25-1, 30-1, 40-1, 50-1, 60-1, 70-1

Single Reduction Worm Gear Box - Type Vertical, Sizes V 75 to V 425

V 75 - Right Angle Vertical Worm Gear BoxV 100 - Vertical Worm Reduction Gearbox AgneeV 125 - Worm Reducer VerticalV 150 - Vertical Worm Gear DriveV 175 - Right Angle Vertical Worm GearboxV 200 - Worm Gearbox VerticalV 250 - Vertical Worm Gear DriveV 300 - Right Angle Vertical Worm DriveV 350 - Worm GearboxV 425 - Vertical Worm Reducer Gear Ratio: 5:1, 10:1, 15:1, 20:1, 25:1, 30:1, 40:1, 50:1, 60:1, 70:1

No expensive adjustable base plate is required for the motor, as V-Belttensioning is done by the use of a torque arm which can be simply shortened orextended to swing the shaft mounted speed reducer about its output hub to tension the 'V' -Belts.Quick and easy speed changing via belt drive.Final output speed can be very accurately obtained by adjusting the 'V' -Belt'drive ratio.High efficiency by using helical gears

Dimensions - Right Angle Horizontal Worm Gearbox

Horizontal Worm Gearbox

H 100 Agnee Worm Gearbox H 125 Worm Reduction GearboxH 150 Worm Reducer Horizontal H 175 Horizontal Worm Gear DriveH 200 Right Angle Worm Gear Box H 250 Horizontal Type Worm GearboxH 300 Worm Reduction Gearbox H 350 Worm Gear Reduction H 425 Worm Gear Reducer Gear Ratio: 5:1, 10:1, 15:1, 20:1, 25:1, 30:1, 40:1, 50:1, 60:1, 70:1

Based on a modular design and construction, the high degree of interchangeability of parts and sub-assemblies among all variants effects considerable economies of production, whilst maintaining the highest standard of component and unit elements. A wide choice of ratio is available based on recommendations laid down in AGMA standards with additional half ratio steps. Profile ground helical gears together with spiral bevel gears lapped in pairs, ensure high standards of accuracy, surface finish and quiet running characteristics. Helical gears are fitted in parallel shaft units whilst units with shaft at right angle incorporate spiral bevel and helical gears. High quality alloy case hardening material provide long life wear resistance and fatigue strength.

Helical gearbox have been introduced to meet the requirements of today's demanding applications in the medium and heavy-duty sector of the power transmission market.

Bevel Helical Gearbox right angle drive industrial gearboxes have been introduced to meet the requirements of today's demanding applications in the medium and heavy-duty sector of the power transmission market.

Spur gearboxes contain gears which have teeth that are straight and run parallel to the axis of revolution. These are used primarily for use in parallel shafts.