Drill bit- The only opportunity you have to use a drill when installing a drip irrigation system is when you're installing the drip emitters. They have barbed connectors designed to fit into 1/4-inch polybutylene tubing, and if you install them directly into the 1/2- or 5/8-inch main PB waterlines, you have to make holes for them.

Advanced irrigation method. Very young system which getting popular these days. It can be operated full circle and half circle, which means all the corner areas covered by using half circle arrangement coming with rain gun. RainGun Irrigation System Saves 3 Times of Water, 3 Times of Power (Current) and also Saves 3 Times of Labour Cost for Irrigation.

Valves in Irrigation System used for controlling the flow of liquid. Various valves allow for on-off control, modulation of the flow rate through the system, and prevention of back flow. They can also be used for pressure relief or as a safety device.

Impact and gear-drive sprinklers are two general types of sprinklers used in lawns, gardens and pastures. They produce moving streams of water and spray nozzles that discharge water on the whole wetted pattern at all times. Impact or gear-drive sprinklers can accommodate only full or part circle application patterns.

Foggers produce finer droplets allowing quicker evaporation resulting in higher humidity for propagation applications.discharge capacity range starting from 2GPH.

Drip laterals are made from specific LLDPE raw materials formulated exclusively for drip Irrigation with protective cover for UV radiation for long lasting pipelines. * ISI marked as per IS 12786 * Size 12mm, 16mm, with 1.1mm, 1.3mm average thickness respectively. * Smooth internal surface to ensure to ensure minimum frictional loss. * Flexible, Elastic and comfortable to handle. * Durable, withstands extreme climatic conditions and long life.

Foggers produce finer droplets allowing quicker evaporation resulting in higher humidity for propagation applications.discharge capacity range starting from 2GPH.

Advanced irrigation method. Very young system which getting popular these days. It can be operated full circle and half circle, which means all the corner areas covered by using half circle arrangement coming with rain gun. RainGun Irrigation System Saves 3 Times of Water, 3 Times of Power (Current) and also Saves 3 Times of Labour Cost for Irrigation.

Drill bit- The only opportunity you have to use a drill when installing a drip irrigation system is when you're installing the drip emitters. They have barbed connectors designed to fit into 1/4-inch polybutylene tubing, and if you install them directly into the 1/2- or 5/8-inch main PB waterlines, you have to make holes for them.

Dripper-Various types of drippers with different discharging capacity(2-20 ltr/hr) are available to suit different of crops.

Drip laterals are made from specific LLDPE raw materials formulated exclusively for drip Irrigation with protective cover for UV radiation for long lasting pipelines. * ISI marked as per IS 12786 * Size 12mm, 16mm, with 1.1mm, 1.3mm average thickness respectively. * Smooth internal surface to ensure to ensure minimum frictional loss. * Flexible, Elastic and comfortable to handle. * Durable, withstands extreme climatic conditions and long life.

The physical, chemical and mechanical properties of AGS PVC pipes and fitting demonstrate their superiority in utility and applications over conventional system.     * Manufactured on latest German designed Machine   * Best quality virgin raw material   * Long life   * Size 20mm to 200 mm in 2, 4, 6 kg/cm2 pressure   * Smooth internal surface to overcome frictional losses   * Pipes with socketed ends and plain ends are available