Our Products
Material - Gunmetal / Brass
These are used with 8 mm conductor or for supporting Air Terminals when used in conjuction with wall mounted Air Terminal base.We Manufacture Heavy duty cast cable saddles made from Gunmetal and Brass. We also export all kind of Heavy Duty Cast Cable Saddle, which are mainly used for the fixing of the copper cable
Manufacturer and Exporter of Copper Braid Rope and Tinned Copper Braid Rope
Our most economical standard Copper Braid Rope and Tinned Copper Braid Rope are made from 0.20 diameter wire and are braided into a tube followed by a rolling process.
Copper Braid Rope and Tinned Copper Braid Rope are available with plain, tinned, nickel-plated or silver-plated surfaces, depending on your application.
Copper Braid Rope and Tinned Copper Braid Rope stand out by being highly twist-free and having a compact cutting surface, which is important for your problem-free further processing. Our Copper Braid Rope and Tinned Copper Braid Rope can be woven with a left or right hand twist. Round, stranded copper flexible are used in welding and power equipment for electrical components such as switches as well as to conduct welding current (welding tools, robots and lines).These can be made from electrolytic copper Cu-ETP (grade C101) or from oxygen free copper
Even though Copper Braid Rope and Tinned Copper Braid Rope are standard items, we also make special tailor made products made exactly to the requirements of our customers.
It is used to clean the objects to be Weld.
We recommend One Slag Tool for Every 50 Joints
Graphite absorbs moisture from weather. So there is a need for propane torch to dry out the inside of the mould thoroughly on both sides, therefore heating the mold to approximately 250 degrees Fahrenheit
We recommend using one Flame torch for Every 100 Joint and than use the refiling.
When making a copper wire connection of Ground rod or other metal connection, place the Welding powder into the graphite mould. Just ignite to start the Welding process. The result will be clean and smooth connection surface. It is also applicable for other metal such as: Iron, Galvanized Steel, Railway track, Cast Iron, Bronze, and Brass. It can be used in various applications to have the certainly good connections in work. Such as Lightning and Surge Protection, Grounding in Electrical Work, Railway Construction, Cathodic Protection.
The connection mould is designed to last for an average of 60 to 100 connections. This will vary according to the care given the mould during use.Graphite mould is made of high quality graphite suitable for high quality Weldinging work and can be used for several times.
Features of Graphite Mould:
- Dimensional accuracy as per the customers demand.
- High quality Graphite which ensures Longer Life.
Gloves is required for safety purpose as the Exothermic Weld Powder melts at more than 1400 degree Celcius.
We recommend a Pair of Gloves for Every 100 Joints
It is designed with the advantages of safety and convenience. It is used to ignite Starting Powder in order to result in exothermic reaction.
We recommend one Flint Gun for every 100 Shots
Steel Metal Disk Steel discs are very important. The disc acts timing device to allow the Exothermic Weld Powder to heat to proper temperature. Steel Disk is designed to contain the exothermic reaction to the upper crucible of a mold until the reaction is complete and ready to Welding. One Metal is must for every shot
Lattice Copper Earth Mat / Ground MatThese Earth Plates are renowned for high durability, tensile strength, corrosion resistance and high performance.
We provide an engineered range of Earth Plate i.e. Lattice Copper which is available in various standards and is manufactured using high quality of copper which is of excellent tensile strength. These Earth plates / Ground plates are used for protection against lightning.
Wide range of Earth Plate - Lattice Copper that we offer is available in various specifications for several kinds of electrical fitting works as to avoid lightning. We offer these Earth Plates or Ground plates as per the requirement and specification of our clients.
We are Biggest manufacturer and suppliers of GI Earthing Strip or Tape Hot Dip that are manufactured using qualitative range of iron and steel. To meet the specific requirements of our clients, we also offer these earthing strips in customization facility based on different parameters. Our range of GI Earthing Strip or Tape Hot Dip are widely used for Earth protection.
As a Quality focused organisation we are the biggest manufacturer and exporters of GI Earthing Strip or Tape Hot Dip.Rendered by in various dimension, the offered of GI Earthing Strip or Tape Hot Dip is know for its proper galvanization and electricity condustive attributers making them ideal for commercial use.
We provide zinc coating thickness certificate with minimum guarantee of 80 microns. We also provide test certificatesof material.
Standard Size of GI Earthing Strip (hot dip)
All STD Size in MM
25 x 3
25 x 6
50 x 6
75 x 10
any size as per customers specification
manufactures, exports and supplies PVC Coated Copper Tape/PVC Covered Copper tapes. Our scope of Earthing Lightning Protection additionally incorporates PVC Coated Copper Tape/PVC Covered Copper tapes.
We deliver the finest quality copper for electrical transmission and circulation, power generator and electronic applications. We expect to be a noteworthy exporter and business sector pioneer in India. PVC spread copper tapes are for the most part utilized as down conveyors on a building's basic lightning assurance framework. The copper is produced to BS EN 13601 and is toughened for convenience. There is a decision of six standard PVC hues to coordinate the most widely recognized building materials and give a stylish completion to the outside lightning assurance framework. All PVC covers are UV set up albeit some discolouration may happen after some time. Other PVC colour's are likewise accessible.
Models Details
Conductor Size mm | Product Code |
---|---|
12.5 x 1.5 | AI12-PCT - 1215 |
25 x 3 | AI12-PCT - 253 |
25 x 6 | AI12-PCT - 256 |
38 x 6 | AI12-PCT - 386 |
50 x 6 | AI12-PCT - 506 |
Earth Bar and Disconnecting link
Earth bars provide a convenient common earthing point for electrical installations. Copper earth bars are available with single or twin disconnecting links which means the earth bars can be isolated for testing. Earth bars are made from high quality hard drawn copper bar.
Customised earth bars are available according to client specification including 600amp and 1000amp heavy power earth bars. Amiable Impex manufacture earth bars to our customer requirements using very high quality copper. Any size of copper earth bar can be sourced, fixing materials changed and channel bases can be redesigned to enable a product to be engineered that meets our customer exact earthing requirements.
Copper earth bars are made from 50x6 mm hard drawn copper bar to BS EN 13601 - tinned copper earth bars also available.
Earth Bars With Disconnecting Link
Description | Length in mm | Width in mm | Height in mm | Product Code |
---|---|---|---|---|
6 way | 475 | 90 | 96 | AI10-EBSD - 6S |
8 way | 575 | 90 | 96 | AI10-EBSD - 8S |
10 way | 725 | 90 | 96 | AI10-EBSD - 10S |
12 way | 825 | 90 | 96 | AI10-EBSD - 12S |
We are the manufacturer of copper laminated bus bars as per customers specification.
Copper laminated flexible jumpers is used as expansion connectors to prevent damages by other parts of machines or switchgears and to take care of thermal and dynamic stresses caused by short circuit current in the system. These jumpers have to realize movements inside machines and switchgear. Flexible Copper Laminate jumper is individually designed and manufactured keeping in view the user’s requirement and application. We also offer jumpers with contact area electro tinned, silver or gold plated to give perfect contact.
Industry Use for Copper Laminated Flexible Jumper::
Switchgear industries
Power plants
Cathodic Protection
Bus Ducts
Transformer
V.C.B.
Resistance welding engineering
Electric Locomotives
Galvano Engineering
Furnaces
Sun Glass is Using For Eye Safety
We Recommend Using Sun Glass For Every 100 Joint.
Two Brush Required:
1) Soft Brush – Its used to Clean Mould Welding Cavity because its shape is very sensitive and there should not be any damage while using Brush, so we recommend to use Soft
2) Hard Brush – Its used to clean other section of Mould
We recommend a Pair of Brush for 25 Connection
Models Details
Conductor Dia. | Product Code |
---|---|
8 mm Dia. Al to 8 mm Dia. Cu |
AI08-BIME – 8 |
8 mm Dia. Al to 25 x 3 Cu tape |
AI08-BIME - 825 |
20 x 3 Al Tape to 25 x 3 Cu Tape |
AI08-BIME - 203 |
20 x 3 Al Tape to 25 x 3 Cu Tape |
AI08-BIME - 253 |
Main features :
Installation Process:
Ground Preparation
Excavate the hole to suit the pit, put a bag mix concrete pad to the pit to sit on, in order to create an even solid base.
Pit Placement
Set the pit in place, and connect the appropriate pipework to the pit. With a grated pit, the grates sit inside the pit.
Back Fill
Back Fill the hole with stabilised crushed rock or concrete depending on the load classification.
Protective Edge
All pits require a concrete surround at the top edge of the pit for protection against vehicle impact.
Advantages: The physical qualities of our Cover is that with its excellent dielectric properties, high mechanical strength, chemical resistance and zero water absorption make it ideal for electrical applications.
Features of Earth Pit Cover :
It is used to remove the metal Scrap from Mould after the Welding Process is done.
We recommend One Slag Tool for Every 100 Joints
Our products are formed of the following :
Features of Copper Bonded Ground Pipe:
With the incorporation of latest technology and skilled workforce, we offer a range of safe earthing Electrodes. These products offered by us have remarkable resistance against corrosion and ensure uniform earth contact resistance during their entire lifetime.
Advantages :
Applications:
Efficient Grounding Systems reduce the risk of electrical arcing and fires. Our Safe Earthing Electrode improves reliability for many applications, including :
Demanded By :
copper bonded earthing electrodeplays a very important role in all electrical systems. The correctly designed and installed earthing system i.e.earthing rods or grounding rods will safeguard both lives & equipments.
low impedance grounding is essential to protect transmitting facilities and personnel from external or internal electrical anomalies.copper bonded earthing electrodsare often insufficient due to high ground resistively or a limited installation area.
with the incorporation of innovative designs and implementation of cutting edge technology, we offer a broad range ofcopper bonded earthing electrodes.these products offer cost effective and efficient earth rod grounding system. These reliable earth rods are corrosion resistant and eliminate electrolytic action.
technical specifications of copper bonded earthing electrodes:
- type of earthing : sealed maintenance free chemical filled earthing electrode.
- diameter of the pipe :
40mm copper bonded earthing electrode
50mm copper bonded earthing electrode
76mm copper bonded earthing electrode
Models Details
Size | Product Code- Brass | Product Code- AL, BRONZE |
---|---|---|
14mm | E15-COB - 14 | AI15-COAB - 14 |
5/8” or 16mm | E15-COB - 16 | AI15-COAB - 16 |
3/4” or 19mm | E15-COB - 19 | AI15-COAB - 19 |
We are the manufacturer of all types cable copper lugs and aluminium lugs like heavyduty / light duty
Exothermic Welding Connection is a way to connect the ground core with grounding, copper wires to copper wires. Copper wire with ground rod, Steel, copper, etc., with the high-efficiency heat used to connect grounding in the ground. This is a convenient and efficient process. Good connection The welding points are good for shock absorption and The cost of connection is relatively low when Compared to other welding processes such as gas welding welding, welding, exothermic welding, the two types of heat to be bonded . The heat is too high to melt. Both types of metal are heated. By spotting the powder, welding with a spark to ignite. Quickly do it together and coordinate with. Quick Exothermic welding powder, rapid heating The advantages of this type of welding due to heat <a I = 17> happens very quickly, it makes welding possible. Different melting points (different metals, for example. Welding steel and copper) well due to heat Immediate, no heating Continuously, the molten metal melts first. Welding procedure Before welding, the metal must be cleaned.
GI Earthing Electrode provides a low-impedance ground in locations of high soil resistivity. Together with this Grounding Minerals, the system dissipates lightning energy and other dangerous electrical fault currents, even in sandy or rocky soil conditions.
GI Earthing Electrodes are the safest way to keep your priceless equipment from any kind of harm done by lightning effects and damage. These kinds of electrodes are the best to use to keep the electrical equipment safe and secure for long life performance.
made with steel core and a copper exterior to provide increased conductivity and corrosion resistance. The electrodes are CPRI approved for length 3 meters, 17 mm diameter with copper coating of 250 microns. Adherence of copper to steel rod is achieved through a pioneered bright acid copper plating process using 14 stations using proper current densities, temperature and brightener additives to achieve copper plating with finer grain structure and a smoother, harder and more uniform surface.
We are one of the prominent names when it comes to high performing array of earthing products. The company has been manufacturing and rendering a wide range of superior quality, high technology and maintenance free gel earthing electrodes in GI. Offering the safe to use and high performing gamut, we have become the most reliable manufacturer and supplier of quality GI Earthing Electrode. Our rich expertise and knowledge make us able to design a highly efficient collection that provides complete protection to the equipment as well as lives.
We have an experienced team of engineers that has huge expertise and specialization in the domain of GI Earthing Electrodes. They work hard to design the best available collection from the superior quality raw materials that are procured from the key vendors of the market.