Post Buy Requirement

AL

Delhi, India

Add Review

Our Product / Services

Other Products / Services #4533324

Hexamatic system

Hexamatic System

It is the most versatile automatic preparation system available, handling both specimen holders for fixed specimens and specimen mover plates for individual specimen preparation.The automatic preparation flow makes Hexamatic the ideal choice for high volume preparation of similar materials. Furthermore, Hexamatic features a possible nine preparation steps, making the total automation perfect for the preparation of a range of materials that require different preparation methods.

View Complete Details

Ask Latest Price & Details

Timing Analysis Roadside Unit - MC5712

Timing Analysis Roadside Unit - MC5712

Timing analysis roadside units for intersection monitoring. Specialised system for analyzing traffic signal intersections and railway crossings, providing statistics of red light violations and driver behavior.

View Complete Details

Ask Latest Price & Details

Welding Expert 5/10

Welding Expert 5/10

Welding Expert is a groundbreaking welding quality tool for fast and highly accurate weld bead analysis. Self-contained and easy to use, Welding Expert quickly generates a variety of important measurements, and automatically compares each to stored acceptance criteria. A box showing all measurement values is stamped with a scale bar for greatest clarity. And you can click and drag all measurement values for best-possible readability. Point-to-point lines can be added, and parallel lines too.

View Complete Details

Ask Latest Price & Details

CitoPress-5

CitoPress-5

CitoPress-5 is a powerful mounting press, giving you high speed and maximum user friendliness. The result is faster turnaround and increased productive capacity. CitoPress-5 is provided with a hydraulic system, where the pressure is controlled with very high accuracy, securing fragile specimens. CitoPress-5 is equipped with a single cylinder and all settings and dosing are manual, which makes it ideal for customers doing few samples. CitoPress-1 is equipped with compact, low-mass mounting units significantly reducing heating time. Available cylinder diameters: 25, 30, 40, 50 mm, 1" and 1". The benefit of shorter heating times is reduced energy consumption. Compared to competing presses, less than half the power is required to heat the mounting unit.

View Complete Details

Ask Latest Price & Details

semi automatic bio chemistry analyzer

Semi Automatic Bio Chemistry Analyzer

Aimil Semi- Automatic Biochemistry Analyzer is a compact, simple, reliable semiautomated analyzer capable to perform tests on whole blood, serum, plasma, cerebrospinal fluid or urine samples for determination of concentration of analytes of Routine Biochemistry, Electrolytes, Enzyme etc.

View Complete Details

Ask Latest Price & Details

Integral Proving Ring

Integral Proving Ring

The Proving Rings are made up of special steel, carefully forged to give maximum strength and machined to give high sensitivity commensurate with stability, ensuring long life and accuracy. All proving rings are integral type viz. the loading (outside) bosses are forged integral with the ring body. This ensures that there is no possibility of abutment shift and consequent loss of accuracy in reading that always exists with bolted abutments. Repeatability in these Proving Rings is as stipulated in IS:4169.The rings are supplied complete with dial gauge and Works Calibration Chart, individually packed in polished wooden boxes. National Physical Laboratory (NPL), (India) National Council for Cement & Building Material (NCCBM )Calibration can also be arranged for any proving ring at an additional cost. Proving rings to meet special requirements are also available on request.Separate polished and ground pair of Loading Pads for Compression Proving Rings and pair of Shackles for Tension Proving Rings are provided to suit each proving ring.

View Complete Details

Ask Latest Price & Details

Triaxial Test Outfits

Triaxial Test Outfits

The settlement of foundations and changes in earth pressure due to movement of retaining walls or other earth supports, the yield of soil caused by application of load, are affected by the stress-strain relationship of soils. The experimental investigation for determining the stress-strain relationship is usually carried out with the Triaxial Compression test. During the test, the soil samples gradually stressed upto failure. Generally speaking, Triaxial tests are performed to simulate different types of stress and drainage conditions that can occur in the sub-soil for simulating the effect of building construction, excavation, tunneling etc. The Three different triaxial tests are usually performed for total and effective stress measurement.

View Complete Details

Ask Latest Price & Details

Electrical CPT (U)

Electrical CPT (U)

Electrical CPT(U) probes, whether in compression or subtraction design, are the most advanced measuring method for Cone Penetration Testing. High quality load cells and high precision calibration at Geomil ensure all electrical cones comply to EN ISO 22476-1 class 1 standards.

View Complete Details

Ask Latest Price & Details

Husky-200 Trailer mounted CPT system

Husky-200 Trailer Mounted CPT System

The Geomil Equipment Husky-200 is a trailer mounted Cone Penetration Testing (CPT) system, providing a high quality design with simple operating features. The Husky is an affordable solution and aimed at operators that frequently need to conduct CPTs. Its flexibility is one of the key elements to select the Husky-200. The easy to haul trailer can be used in almost any terrain, but the complete unit can also be applied for nearshore testing off a barge.

View Complete Details

Ask Latest Price & Details

Aimil-GDS Automatic Triaxial Testing System (AIM 096-GDS)

Aimil-GDS Automatic Triaxial Testing System (AIM 096-GDS)

The Aimil - GDS Triaxial Testing System has been designed to comply with international standards of test execution and data presentation and to qualify for national laboratory accreditation schemes. The system is controlled by the user's PC running MS Windows and GDSLAB software integrated with Aimil electronics. The operator chooses the type of test from a test menu (eg. multi-stage, stress path etc) and then enters the test parameters (of cell pressure, back pressure, testing rate and so on) and test termination conditions. The test then proceeds automatically with all test data being saved to a file. On-line graphics are presented with up to three graphs displayed together with a block of current live test data. The computer directly controls the cell pressure, back pressure and testing rate. In addition to logging these parameters to the PC hard drive, the computer alsologs axial displacement, axial load, pore pressure and volume change.

View Complete Details

Ask Latest Price & Details

RF Attenuators

RF Attenuators

The Microlab coaxial attenuators cover DC to 3 GHz frequency range. Average powers range from 2W to a full 200 Watts average rating. Powers to 1 kW average and 10 kW peak covering DC to 3 GHz are available to special order. Wide range of fixed standard values for general-purpose use, Continuously variable, dissipative attenuators for fine level adjustment.

View Complete Details

Ask Latest Price & Details

Elcometer 280 Pulsed DC Holiday Detector

Elcometer 280 Pulsed DC Holiday Detector

The Elcometer 280 is a stick type holiday detector which has been designed to make pulsed DC high voltage holiday detection safer, easier and more reliable than ever before.

View Complete Details

Ask Latest Price & Details

MoviPol-5 electrolytic metal polishing machine

MoviPol-5 Electrolytic Metal Polishing Machine

MoviPol-5 is a portable electrolytic metal polishing and etching machine. Electrolytic preparation is a particularly fast and efficient method of non-destructive metallographic preparation. MoviPol-5 is compact and robust and can be used anywhere.MoviPol-5 can be applied directly to critical surfaces and is widely used for metal safety inspection, especially for critical parts of larger units, e.g. welds and other joints.

View Complete Details

Ask Latest Price & Details

sieves set

Sieves Set

The analysis of soil by particle size provides a useful engineering classification system from which a considerable
amount of empirical data can be obtained. This helps in ascertaining possible frost action, determining graded filters,
selection of grouting materials, designing of cement and asphaltic concrete mixes etc.Two different procedures are used for coarse and fine soils. Sieving is used for gravel as well as sand size particles and
sedimentation procedures are used for finer soils. For soils containing coarse and fine soil particles, it is usual to employ
both sieving and sedimentation procedures.

View Complete Details

Ask Latest Price & Details

Discoplan-TS

Discoplan-TS

Discoplan-TS is a precision cutting and grinding machine for mineralogical, petrographic and ceramic thin sections. The left side of the machine has a table with a diamond cut-off wheel and holders for initial cutting and resectioning of the specimen. The right side has a diamond cup wheel and a vacuum holder for simultaneously grinding up to three specimens almost to their final thickness with an accuracy of 2 m.

View Complete Details

Ask Latest Price & Details

Friction stir welding test rigs

Friction Stir Welding Test Rigs

Friction stir welding test rigs feature high-stiffness; precision-aligned annular load frame with 5 axis movements and independently controlled servo-actuators using the advanced features of the 2370MS controller to provide translation and deformation control of each axis, these systems are ideal for welding aluminum sheets. Suitable to weld steel, titanium, aluminum alloys and mix of thickness from 0.5mm to 65mm. Vertical load capacity is 50kN with max. 3000RPM at constant torque. 500mm stroke length in X and Y axis. Wide range of options, straight, 3D contour, profile welding etc., Testing & Calibration

View Complete Details

Ask Latest Price & Details

Geotextile Permeameter (AIM 254)

Geotextile Permeameter (AIM 254)

The Geotextile Permeameter has been designed to meet the test requirements of water permeablity of Geotextile. It has been made keeping in view the growing requirement of testing of coir geotextile. The geotextile is tested in the uncompressed state for permittivity. The determination of permittivity of geotextile is carried out, either by using constant head or falling head test procedures. The equipment can be used for performing tests as per ASTM-D4491-92 The equipment comprises of specimen holder assembly suitable for 73mm & 1 OOmm dia sample, complete with interconnecting tubes houses inside a metal housing & mounted on a table alongwith a pump for delivering de-aried water from de-airing below the specimen holder assembly unit. A water tank of 100 ltrs. capacity is placed alongside the main equipment on a steel stand to store & supply de-aired water continuously, as required, during the test. Geotextile permeameter comprises of specimen holder assembly for holding specimen of dia 73mm. Housing for specimen holder complete with inlet & outlet valves, Head differential measurement arrangement mounted on a stand and a Water Tank, complete with water level gauges suitable for falling head and constant head tests

View Complete Details

Ask Latest Price & Details

Lavamin automatic cleaning unit

Lavamin Automatic Cleaning Unit

A unique, new specimen cleaning unit Say good bye to manual cleaning Lavamin is a world-first automatic cleaning unit for specimens. Adequate for Struers specimen holders and mover plates up to 160 mm in diameter. Cleaning is done by ultrasound, no soap or alcohol is used. Drying is done by spinning the holder at high speed Key messages: Fully automated - perfect cleaning every time, Faster cleaning - higher productivity, No cleaning agents - no environmental footprint, Environmentally friendly and cost saving

View Complete Details

Ask Latest Price & Details

Aimil True Speed Soil Frame

Aimil True Speed Soil Frame

The 'True Speed" load frames provide a long term, very low maintenance, value for money operation. The frame works on an internal feedback system and eliminates the fixed gear system. The limitation of speed drops in the older load frames with increase in load is now removed, giving higher accuracy in tests like CBR, UCS and Triaxial and other routine tests. This frame represents the most economical option with the true speed feature. It is able to perform tests such as CBR UCS while maintaining higher accuracy levels as compared to traditional frames. The 34 speed load frame represents a significant upgrade to the traditional 30 speed load frames which have cumbersome systems and have load drops. The 34 speed Soil Frame ensures speed drops within 5% of displacement rate for 34 fixed speeds in a large useable range suitable for most soil testing applications.

View Complete Details

Ask Latest Price & Details

Antenna Chambers

Antenna Chambers

AWT Globals new ATC series low PIM Antenna Test Chambers are especially designed for testing RF devices and antennas from 700 MHz to 6000 MHz. Not only are todays antennas required to show excellent transmission and S-parameters characteristics, due to modern modulation technologies, these antennas have to come with very low passive intermodulation distortion (PIM). Standard anechoic test chambers may provide good shielding, but they are often not suited for low PIM antenna measurements; due to their own high residual PIM. Besides the very high shielding factor of more than 90 dB, our ATC series provide lowest residual passive intermodulation. Properly designed pyramidal electromagnetic absorbing material and special manufacturing techniques guarantee best results.

View Complete Details

Ask Latest Price & Details

KLP Series Laboratory Grade Power supply

KLP Series Laboratory Grade Power Supply

The KLP is an entirely new laboratory grade power supply in which the voltagecurrent limits are automatically recalculated, forming a constant-power hyperbolic-shaped boundary between the voltage and current modes. This curve, which replaces the single max-power operating point of conventional power supplies, provides the user with a greatly expanded choice of maximum power volt-ampere combinations as illustrated in the diagram by points A to B to C. The constant-power limit of the KLP is 1200 watts.

View Complete Details

Ask Latest Price & Details

CitoPress struers mounting machine

CitoPress Struers Mounting Machine

The CitoPress-30 is an advanced, electro-hydraulic programmable dual cylinder mounting press. The CitoPress-30 offers total process control, database facilities and synchronous or independent operation of both cylinders. The CitoPress-15 is an advanced, electro-hydraulic, programmable single cylinder mounting press. The CitoPress-15 offers total process control and database facilities. CitoPress-15-30 has powerful mounting press, giving you high speed and maximum user-friendliness. The result is faster turnaround and increased productive capacity. CitoPress-15-30 has unique automatic dosing system enables dosing of a pre-set amount of mounting resin. The advantages are faster filling of the cylinders and less spilling of resins. CitoPress-15-30 feature a large, LCD display, which graphically shows parameter settings and mounting progress. Changing parameters is very fast and easy by using the turnpush-knob. Intuitive operation secures faster turnaround, a minimum of errors and the shortest possible set-up time.

View Complete Details

Ask Latest Price & Details

Asphalt Ignition Oven

Asphalt Ignition Oven

Troxler also offers advanced infrared (IR) technology to measure asphalt content by the NCAT ignition method. The H.M.A. sample is ignited using IR elements. This produces a very clean and efficient burning of the asphalt while limiting the aggregate degradation. The New Technology Oven (NTO) combines this sophisticated oven with an integrated weighing system to continuously measure the bituminous weight loss during combustion and to automatically display the percent of asphalt in the mix. The remaining aggregate can be sieved for gradation analysis.

View Complete Details

Ask Latest Price & Details

Consolidation Testing System - GDSAOS

Consolidation Testing System - GDSAOS

GDS Instruments Automatic Oedometer System (GDSAOS) is the modern replacement for a traditional hanging weight oedometer. The GDSAOS is a self-contained stepper motor driven unit that can be controlled either manually using its Smart Keypad or from a PC using the USB interface. There is no requirement for compressed air or manually placed weights. The GDSAOS is available with a standard or long-stroke frame both of which can be upgraded to perform constant rate of strain and unconfined compressive strength testing.

View Complete Details

Ask Latest Price & Details

Environmental Triaxial Range

Environmental Triaxial Range

The GDS Instruments Environmental range are temperature controlled testing systems for both load frame and stress path testing systems. The systems have heating & cooling option of -30oC to +65oC, -20oC to +80oC, -10oC to +65oC. Heating only systems range from Ambient to 100oC. The pressure range for these systems is up to 100MPa for the load frame based system and 10MPa on the stress path system. The capabilities of these systems allow for a multitude of different testing applications including, temperature control, frozen soils and gas hydrate testing.

View Complete Details

Ask Latest Price & Details

GDS Rock Mechanics Range

GDS Rock Mechanics Range

To assess the deformation and failure characteristics of rock in the laboratory, test equipment must be stiff to avoid tremendous backlash and spring effects at failure, as well as sufficiently designed and manufactured to ensure consistent results year on year. The GDS instruments rock mechanics range is therefore built to meet these requirements, providing high load 2MN static, 1.5MN dynamic systems, with options to include advanced transducers, such as acoustic velocity and acoustic emissions.

View Complete Details

Ask Latest Price & Details

GDS SASW and CSWS

GDS SASW And CSWS

The Spectral Analysis of Surface Waves (SASW) system provides compact, lightweight and easy-touse equipment for the analysis of surface waves. It allows fast, non-invasive testing for all soil types, including residual soils and fractured soft rock. Typically used in site investigations for foundation engineering design and settlement prediction, SASW is also suited for the rapid sub-grade evaluation for roads, tracks and runways. The GDS SASW system is based on the GDS Surface Wave Control Unit which is also configured for use as the main control unit for the GDS Continuous Surface Wave System (CSWS). The CSWS uses a vibrating energy source run at single frequencies under the control of the unit

View Complete Details

Ask Latest Price & Details

GDS Triaxial Automated System (GDSTAS)

GDS Triaxial Automated System (GDSTAS)

GDS Instruments Triaxial Automated System (GDSTAS) is a load frame-based triaxial testing system. The system is configured by choosing from a range of load frames (50kN to 2MN), triaxial cells, pressure controllers and software.

View Complete Details

Ask Latest Price & Details

GDS Triaxial Testing System (GDSTTS)

GDS Triaxial Testing System (GDSTTS)

GDS Instruments Triaxial Testing System (GDSTTS) is a fully automated triaxial testing system designed principally for stress path testing. The GDSTTS is based on the classic Bishop & Wesley type stress path triaxial cell which controls stress directly on the sample. The system can be configured using Enterprise, Standard or Advanced level controllers. The 3850mm cell is for up to 7kN axial force, with the larger 70100mm cell up to 25kN. This is the system of choice for teaching laboratories and researchers.

View Complete Details

Ask Latest Price & Details

Hydraulic Resilient Modulus Testing System

Hydraulic Resilient Modulus Testing System

The GDS Hydraulic Resilient Modulus Testing System (HRMTS) enables the resilient modulus and permanent deformation of unbound basesub-base pavement materials to be determined. The system, uses an axially-stiff load frame with a beam mounted hydraulic actuator to apply dynamic cyclic axial loads, with a GDS triaxial cell used to confine the test specimen. A number of options are also available for measuring axial deformations, ranging from localised LVDTs to external linear potentiometers.

View Complete Details

Ask Latest Price & Details

Instrumented Hoek Cells

Instrumented Hoek Cells

GDS Instrumented Hoek Cells is a highly sophisticated, research focused, version of the traditional Hoek cell that can be fully instrumented.

With 70MPa cell pressure and maximum loads up to 2MN.

It uniquely combines the measurement versatility of a high pressure triaxial cell with the compact size, simplicity, ease of use and high testing throughput of a traditional Hoek-Franklin type cell.

View Complete Details

Ask Latest Price & Details

Instruments Pressure Volume Controllers

Instruments Pressure Volume Controllers

GDS Instruments Pressure Volume Controllers are general-purpose water pressure source and volume change gauges for the precise regulation and measurement of fluid pressure and volume change. Pressure applications from 0 up to 100MPa of wateroilair, with accurate measurement of volume change, all of which are capable of being logged and controlled by PC. The Enterprise Level PressureVolume Controller (ELDPC) is aimed at commercial testing (max 1MPa). The Standard PressureVolume Controller (STDDPC) is aimed at medium pressure commercial testing (

View Complete Details

Ask Latest Price & Details

Unsaturated Soil Testing System (UNSAT)

Unsaturated Soil Testing System (UNSAT)

GDS Unsaturated Triaxial Testing System (UNSAT) is an extension to traditional triaxial testing, in that soils from above the water table may be tested under conditions approaching the in-situ stress state and degree of saturation or partial saturation. All GDS triaxial testing systems (as well as triaxial equipment from other manufacturers*) can be modified to allow for Unsaturated Triaxial Testing. GDS provide 4 methods to perform unsaturated testing. Method A: direct volume measurement using am air pressurevolume controller Method B: HKUST inner cell Method C: double walled cell Method D: on-sample strain transducers

View Complete Details

Ask Latest Price & Details

SpiroThor

SpiroThor

SpiroThor is a pulmonary function diagnostics and monitoring device. SpiroThor is suitable for screening COPD (Chronic Obstructive Pulmonary Disease) and Asthma . It has Built-in automatic internal callibration , Diagnosticdecision support system , Innovative diagnostic visualization, Zero-Cross contamination(easy to disinfect) . It also include Automatic Internal Calibration, Tele Medical Connection via bluetooth, Long term monitoring for home care use, Pharmaceutical testing subsystem, Human voice communication with the patient

View Complete Details

Ask Latest Price & Details

Aimil Sieve Shaker

Aimil Sieve Shaker

Aimil Electrically operated mechanical Sieve Shakers are used to make the process of sieving easier & quicker. These Sieve Shakers are popularly used not only in soil laboratories but also in a number of industries where sieving is required such as for ores, refractory materials, minor aggregates, pigments, powdered coal, soap, cement, grains, roofing materials, plastic moulding powders and pharmaceuticals.

View Complete Details

Ask Latest Price & Details

Road Surface Profiler (RSP) Mark III

Road Surface Profiler (RSP) Mark III

The Dynatest 5051 Mk III Road Surface Profilometer measures a number of indices and characteristics including the longitudinal profile, International Roughness Index (IRI), Ride Number (RN), transverse profile, rutting, macrotexture, and geometrics (crossfall, gradient and radius of curvature). It can also provide data for the Boeing Bump Index calculation. The RSP has a unique "Stop & Go" functionality enabling the equipment to operate in an efficient manner in urban areas, at traffic lights, stop signs, junctions and roundabouts, making it an ideal tool for data collection on both urban and rural networks. The equipment meets the highest ASTM, AASHTO and State road standards for accuracy.

View Complete Details

Ask Latest Price & Details

Casagrande Porous Tube Piezometer

Casagrande Porous Tube Piezometer

Casagrande type Porous Tube Piezometers are used for measuring and controlling pore water pressure in soil, rock and to monitor the construction control and stability in embankments, dams and reservoirs. A standpipe, with a porous piezometer tip connected at its lower end, is installed in a borehole. Bentonite andOR grout are used to seal the borehle above the "tip". The water level inside the "standpipe" is measured with the help of a Electronic water level Indicator, and corrosponds to the water pressure at the piezometer elevation. Permeability of soil in the vicinity of the tip can be determind, when required, by increasing the water head in the standpipe, and observing it's dissipation rate. Advantages:- (a) Ideal fordermining the piezometric level during routine site investigation. (b) Can also be installed after the completion of construction & theefore suitable for use in existing damsembankments.

View Complete Details

Ask Latest Price & Details

polishing machines

Polishing Machines

LaboPol-30 is a strong grinding and polishing machine for 300 mm diameter discs. With variable speed from 50-500 rpm, it is possible to carry out grinding, lapping and polishing processes, including final polishing with oxide polishing suspensions. LaboForce-Mi is a semi-automatic specimen mover for thin sections and mineralogical specimens. The force is applied through springs which can be individually adjusted up to maximum load of 20 N. Exchangeable specimen mover plates for 4 or 8 specimens are available. LaboDoser is a dosing unit for LaboPol with LaboForce.

View Complete Details

Ask Latest Price & Details

Road Surface Profiler (RSP) Mark IV

Road Surface Profiler (RSP) Mark IV

The RSP-IV is the portable version easily attached to any vehicle with the capability to attach 1 or 2 lasers. Options include texture capable lasers, DGPS, and ROW cameras.

View Complete Details

Ask Latest Price & Details

Interface Friction Measurement Apparatus

Interface Friction Measurement Apparatus

Soil reinforcement is a recent and fast developing technique to improve soil behaviour for a variety of civil engineering works; e.g. earth retaining structures, slope stability, land slides protection works, pavement, etc. In order to utilise fully the strength of reinforcement material while transferring load and forces via soil or aggregate to the reinforcement, a correct assessment of the soilreinforcement frictional relationship is essential. The frictional properties can be assessed by AIM 245 means of a shear box which is modified either to conduct a 'Modified Shear Test' or 'Pullout Test'. In the former test, reinforcement material is placed and clamped in the plane of shear with soil above the fabric, whereas in the latter test, the fabric placed between the top and bottom shear boxes, is covered on both sides with soil and is then pulled out to evaluate the frictional resistance. This interface friction measurement apparatus has been specially designed to evaluate both 'frictional' as well as 'pull out resistance' of soil reinforcing materials at a shear rate and drainage condition as desired by the designer These are 60x60x25 mm assemblies which can be used for soils with 085 not greater than 4. 75 mm. These apparatus are to be fitted in conventional Direct Shear Test Frame.

View Complete Details

Ask Latest Price & Details

Liquid Limit Casagrande Method

Liquid Limit Casagrande Method

The liquid limit defined as the moisture content at which the soil passes from plastic state to liquid state, is very helpful for the classification of the potential properties of the soil material. The liquid limit gives a measure of the shearing resistance which a soil has, when mixed with water. The liquid limit of soil can be determined by Casagrande Method or Cone Penetrometer Method.

View Complete Details

Ask Latest Price & Details

Constant Pressure System Oil Water Type

Constant Pressure System Oil Water Type

Oil Water Constant Pressure System is an extremely versatile apparatus which can be used for a wide range of applications. This system provides an effective alternative to Mercury and Water Constant Pressure system especially where the laboratory head room is insufficient. The apparatus is designed to provide confining pressure upto 16 bar to Triaxial Cells however for safety it has been factory-locked at a max Pressure of 12kgcm2

View Complete Details

Ask Latest Price & Details

ESA Series Electrical Safety Compliance Analyzer.

ESA Series Electrical Safety Compliance Analyzer.

The first capacitive-type touch-screen tester of the world Provided with AC Hipot, DC Hipot, Ground Bond, Insulation Resistance, Touch Current, Functional Run test, and AC power sources; one device serving the purposes of 7 devices; less space needed for the test; provided with oversized 7-inch TFT-LCD (resolution 800 x 400) to enhance readability and identifiableness of data; automatically detecting input voltage 115V or 230V to protect instrument from the damages caused by wrong input voltage; colored and graphic data allowing users to learn how to do it right and thus shortens the learning process; built-in scanner function (External H.V.) enhancing test efficiency.

View Complete Details

Ask Latest Price & Details

Bransonic Ultrasonic Cleaners

Bransonic Ultrasonic Cleaners

General Description Bransonic M and MH Series cleaners are known for offering a level of precision and reliability you have come to expect from Branson. M Series includes 60-minute mechanical timer and continuous operation. MH Series includes 60-minute mechanical timer and continuous operation with heating capability. M and MH Series cleaners offer the following features: Sweep frequency eliminates standing waves and creates consistent cavitation throughout the tank. 40 kHz rugged industrial transducers. Controls are located above and behind the cleaning tank in an easily accessible control tower panel, and raised above the tank to avoid damage from cleaning solutions. Convenient built-in pour drains are featured on .5- and .75-gallon models. Tank drains with valves are incorporated on models 1.5-gallon and larger. Plastic body, chemical-resistant. Constant activitypower tracking automatically maintains the ultrasonic power by adjusting for changes in liquid level and temperature caused by a light or heavy load. This helps ensure more uniform cleaning and consistent performance, even with multiple users or when bath conditions change. NOTE: Tank cover included. For optimum cleaning results, Branson offers a line of accessories including perforated trays, solid trays, beaker covers and support racks for your application needs.

View Complete Details

Ask Latest Price & Details

Open Standpipe Piezometer

Open Standpipe Piezometer

The open standpipe Piezometer is used for measuring ground water level and it is variation with time.The open standpipe consists of a PVC riserstand pipe of 50mm OD, 3m in length with socket for joining.The intake point consists of a PVC standriser pipe 1m long perforated section, duly covered with brass mesh. The ground water seeps in to this riserstand pipe through the slottedperforated section, and attains a level equal to ground water. The measurement is taken through the help of an Electronic water level indicatiorsounder with required cable length.

View Complete Details

Ask Latest Price & Details

Polarisation Maintaining Fibre

Polarisation Maintaining Fibre

HiBi is a singlemode, polarization-maintaining optical fiber designed for high-performance interferometric and polarimetric sensors, integrated optics and coherent communications. The characteristic Bow-Tie stress-applying parts, or SAPs, act like opposing wedges to generate the optimum stress distribution within the fiber. This time-proven design gives the very best in both performance and handling maximum birefringence, maximum performance with minimum stress-breakout when cleaved, connectorised or polished.

View Complete Details

Ask Latest Price & Details

Piezometer, Vibrating Wire Type

Piezometer, Vibrating Wire Type

Vibrating Wire Piezometer are designed for accurate and long term measurement of pore water pressure in fully or. Partially saturated soil & rock strata. This isparticularly useful in estimating slope stability, safe placement rate of fill or excavation, design and build for lateral or. uplift pressure or. buoyancy, monitoring the performance of earth-fill , dams and embankments, seepage and verify modelsof flow, monitor surface water run-off, water levels at contaminated sites.measures and controls pore water pressure in soil & rock. The V.Wire Piezometers are available from a range of: 0.2 MPa to 5.010.0 MPa. These V.Wire Piezometers are supplied with in-built thermister, to measure the temperature also apart from Pore water pressure.

View Complete Details

Ask Latest Price & Details

Hand Operated Extractor

Hand Operated Extractor

Hand operated Extractor, for 38 mm dia specimens for extracting soil core specimens of 38 mm dia from sampling tube or from larger size samplers. It can be used in the field also, for taking out samples.

View Complete Details

Ask Latest Price & Details

Multi Function Vehicle (MFV)

Multi Function Vehicle (MFV)

The Dynatest Multi Functional Vehicle combines the functionality of the RSP with the Laser Rut Measurement System (LRMS) andor the Laser Road Imaging System (LRIS), or the Laser Crack Measurement System (LCMS) from Pavemetrics. The MFV measures the IRIRN, longitudinal and transverse profile, macrotexture, geometrics (crossfall, gradient, and radius of curvature) plus 2D or 3D pavement imagery and provides photo logging by up to 5 Right of Way cameras. The MFV brings safety to the forefront, allowing surveys of roads and airports to be performed from a vehicle at normal traffic speeds, day or night.

View Complete Details

Ask Latest Price & Details

Fox-100 Stand Alone Penetrometer Pusher

Fox-100 Stand Alone Penetrometer Pusher

The Fox-100 stand alone penetrometer is an easy to use, long lasting and versatile full stroke pushing unit for CPT operations with a max. push capacity of 100kN. Provided with a wheel-set the Fox-100 can be moved easily. It can be fixed to a firm base, such as a truck platform, jack-up, skid or soil anchored, e.g. by means of the hand-held hydraulic Hygand anchoring gear.

View Complete Details

Ask Latest Price & Details

View More

Tell Us What are you looking for? Will call you back

Contact Us

Arti Bhargava (Aimil Limited)
A-8, Naimex House, Mohan Cooperative Industrial Estate Mathura Road, Delhi - 110044
Share us via

View Contact No.