Our Products

Cutting Machine #3184340

Plasma Cutting Machine

19,500 /Set Get Latest Price

Max Cutting Thickness >30 mm
Max Cutting Speed 0-500 mm/min
Max Cutting Width 1000-2000 mm

View Complete Details

Ask Latest Price & Details

Portable Plasma Cutting Machine

Our prominence in this industry enables us to design and develop impeccable Portable Plasma Cutting Machine. Designed to excellence, Portable Plasma Cutting Machine guarantees precise performance. Portable Plasma Cutting Machine can be availed in different designs as per the requirements and at an economical price.

Highlights

Constant O/P current even though the supply voltage varies within the range of +/- 2%
IGBT based inverter power supply saves precious power
High open circuit voltage (OCV) for good arc striking and for good quality cutting
Electronic pilot arc system ensures soft start and high consumable life
No load power consumption is very low (<0.1 KVA)
Stepless setting for cutting current
Actual cutting current can be seen on front panel digital display
High temperature protection with indication
Single phasing protection
Air pressure switch with indication for safe cutting
High efficiency more than 90%
Good layout for easy serving
Superior speed and cutting capacity
CNC/Robotic machine interface option for automated control
Easy to use

Features

Adopts rational optimized design and arrange, high inverter frequency, high duty cycle, economy and energy saving.
Subminiature volume, lightweight, easy to carry, is especially suitable for moving job outdoor.
Compared with flame cutter, the air plasma arc cutter use cheaper compressed air as cutting gas supply and has the advantages of low cost and high speed etc.
Compared with traditional cutter, has the advantages of high success rate for arc initiation, high arc voltage, concentrated heat, powerful cutting ability, high cutting speed, narrow kerf, smooth cut face, less deformation.
Can cut metal plate along curve line in different thickness, cutting current digital display, cutting current adjust steplessl, accurate and read directly.
Built in over heat, over current, over voltage and low voltage protection circuit, operating, safely.

Technical Specifications

Parameter Model	APH - Cut - 40
Input voltage (v)	AC220 V ±15%
Frequency (HZ)	50/60
Rated input current (A)	30
No-load voltage (V)	230
Output current Range	20-40
Rated Outpur voltage (V)	96
Duty Cycle (%)	60
No-load loss (W)	40
Efficiency (%)	80
Power Factor	0.73
Insulation Grade	F
Housing Protection Grade	IP21
Arcing Way	Contact
Recommended Air Presuure	04/05/2013
Net Weight (kg)	9
Dimension (mm)	371 x 153 x 232

View Complete Details

Ask Latest Price & Details

Air Plasma Cutting Machine

Delivering the orders on time is one of our specialties for which we are highly admired by the clients. Based in Goregaon(India), we hold specialization in offering quality products that are the perfect outcome of premium material and modern manufacturing techniques.

View Complete Details

Ask Latest Price & Details

Plasma Cutting Machine (Cut 60)

Our organization is widely appreciated for offering the best Plasma Cutting Machine (Cut 60) in the market. Based on the advanced technology, Plasma Cutting Machine (Cut 60) ensures precise performance and longer service life. We offer Plasma Cutting Machine (Cut 60) in different specifications to meet divergent demands of the clients.

Highlights

Tough construction
Durable standards
Low maintenance cost
Precise designs

Features

Adopts rational optimized design and arrange, high inverter frequency, high duty cycle, economy and energy saving.
Subminiature volume, lightweight, easy to carry, is especially suitable for moving job outdoor.
Compared with flame cutter, the air plasma arc cutter use cheaper compressed air as cutting gas supply and has the advantages of low cost and high speed etc.
Compared with traditional cutter, has the advantages of high success rate for arc initiation, high arc voltage, concentrated heat, powerful cutting ability, high cutting speed, narrow kerf, smooth cut face, less deformation.
Can cut metal plate along curve line in different thickness, cutting current digital display, cutting current adjust steplessl, accurate and read directly.
Built in over heat, over current, over voltage and low voltage protection circuit, operating, safely.

Technical Specifications

Parameter Model	APH-Cut-60
Input voltage (v)	AC380 V ±15%
Frequency (HZ)	50/60
Rated input current (A)	12
No-load voltage (V)	295
Output current Range	20-60
Rated Outpur voltage (V)	104
Duty Cycle (%)	60
No-load loss (W)	60
Efficiency (%)	85
Power Factor	0.93
Insulation Grade	F
Housing Protection Grade	IP21
Arcing Way	Contact
Recommended Air Presuure	01/15/2013
Net Weight (kg)	19
Dimension (mm)	480 x 204 x 303

View Complete Details

Ask Latest Price & Details

Plasma Cutting Machine (Cut 100)

We hold proficiency in designing and developing high performing Plasma Cutting Machine (Cut 100). We precisely design and manufacture Plasma Cutting Machine (Cut 100) keeping in mind clients requirements and industry laid parameters. Being impeccable, Plasma Cutting Machine (Cut 100) ensures optimum performance.

Highlights

Low maintenance cost
Precise designs
Tough construction
Durable standards

Features

Adopts rational optimized design and arrange, high inverter frequency, high duty cycle, economy and energy saving.
Subminiature volume, lightweight, easy to carry, is especially suitable for moving job outdoor.
Compared with flame cutter, the air plasma arc cutter use cheaper compressed air as cutting gas supply and has the advantages of low cost and high speed etc.
Compared with traditional cutter, has the advantages of high success rate for arc initiation, high arc voltage, concentrated heat, powerful cutting ability, high cutting speed, narrow kerf, smooth cut face, less deformation.
Can cut metal plate along curve line in different thickness, cutting current digital display, cutting current adjust steplessl, accurate and read directly.
Built in over heat, over current, over voltage and low voltage protection circuit, operating, safely.

Technical Specifications

Parameter Model	APH-Cut-100
Input voltage (v)	AC380 V ±15%
Frequency (HZ)	50/60
Rated input current (A)	23.1
No-load voltage (V)	268
Output current Range	20-100
Rated Outpur voltage (V)	120
Duty Cycle (%)	60
No-load loss (W)	80
Efficiency (%)	85
Power Factor	0.93
Insulation Grade	F
Housing Protection Grade	IP21
Arcing Way	Transfer
Recommended Air Presuure	01/25/2013
Net Weight (kg)	39
Dimension (mm)	560 x 370 x 350

View Complete Details

Ask Latest Price & Details

Plasma Cutting Machine (Cut 160)

Our expertise lies in designing and developing Plasma Cutting Machine (Cut 160) having excellent performance. Plasma Cutting Machine (Cut 160) is configured with advanced technology components; thereby ensures precise performance at low operational cost. Plasma Cutting Machine (Cut 160) is available with us in different technical specifications, addressing divergent demands of the clients.

Highlights

Low maintenance cost
Precise designs
Tough construction
Durable standards

Features

Adopts rational optimized design and arrange, high inverter frequency, high duty cycle, economy and energy saving.
Subminiature volume, lightweight, easy to carry, is especially suitable for moving job outdoor.
Compared with flame cutter, the air plasma arc cutter use cheaper compressed air as cutting gas supply and has the advantages of low cost and high speed etc.
Compared with traditional cutter, has the advantages of high success rate for arc initiation, high arc voltage, concentrated heat, powerful cutting ability, high cutting speed, narrow kerf, smooth cut face, less deformation.
Can cut metal plate along curve line in different thickness, cutting current digital display, cutting current adjust steplessl, accurate and read directly.
Built in over heat, over current, over voltage and low voltage protection circuit, operating, safely.

Technical Specifications

Parameter Model	APH - Cut - 160
Input voltage (v)	AC 380 V ±15%
Frequency (HZ)	50/60
Rated input current (A)	44.3
No-load voltage (V)	320
Output current Range	20-160
Rated Outpur voltage (V)	144
Duty Cycle (%)	60
No-load loss (W)	100
Efficiency (%)	85
Power Factor	0.93
Insulation Grade	F
Housing Protection Grade	IP21
Arcing Way	Transfer
Recommended Air Presuure	01/01/1940
Net Weight (kg)	60
Dimension (mm)	670 x 337 x 510

View Complete Details

Ask Latest Price & Details

Tell Us What are you looking for? Will call you back

Contact Us

Ganesh Suvarna (Air Plasma House)
208 New Diamond Industrial Est.Near Virwani Industrial Est. Goregaon E ., Mumbai, Maharashtra
Share us via
Call 08068051372 Ext. 223

Our Products

Cutting Machine #3184340

Plasma Cutting Machine

19,500 /Set Get Latest Price

Max Cutting Thickness >30 mm
Max Cutting Speed 0-500 mm/min
Max Cutting Width 1000-2000 mm

View Complete Details

Ask Latest Price & Details

Portable Plasma Cutting Machine

Constant O/P current even though the supply voltage varies within the range of +/- 2%
IGBT based inverter power supply saves precious power
High open circuit voltage (OCV) for good arc striking and for good quality cutting
Electronic pilot arc system ensures soft start and high consumable life
No load power consumption is very low (<0.1 KVA)
Stepless setting for cutting current
Actual cutting current can be seen on front panel digital display
High temperature protection with indication
Single phasing protection
Air pressure switch with indication for safe cutting
High efficiency more than 90%
Good layout for easy serving
Superior speed and cutting capacity
CNC/Robotic machine interface option for automated control
Easy to use

Features

Adopts rational optimized design and arrange, high inverter frequency, high duty cycle, economy and energy saving.
Subminiature volume, lightweight, easy to carry, is especially suitable for moving job outdoor.
Compared with flame cutter, the air plasma arc cutter use cheaper compressed air as cutting gas supply and has the advantages of low cost and high speed etc.
Compared with traditional cutter, has the advantages of high success rate for arc initiation, high arc voltage, concentrated heat, powerful cutting ability, high cutting speed, narrow kerf, smooth cut face, less deformation.
Can cut metal plate along curve line in different thickness, cutting current digital display, cutting current adjust steplessl, accurate and read directly.
Built in over heat, over current, over voltage and low voltage protection circuit, operating, safely.

Technical Specifications

Parameter Model	APH - Cut - 40
Input voltage (v)	AC220 V ±15%
Frequency (HZ)	50/60
Rated input current (A)	30
No-load voltage (V)	230
Output current Range	20-40
Rated Outpur voltage (V)	96
Duty Cycle (%)	60
No-load loss (W)	40
Efficiency (%)	80
Power Factor	0.73
Insulation Grade	F
Housing Protection Grade	IP21
Arcing Way	Contact
Recommended Air Presuure	04/05/2013
Net Weight (kg)	9
Dimension (mm)	371 x 153 x 232

View Complete Details

Ask Latest Price & Details

Air Plasma Cutting Machine

View Complete Details

Ask Latest Price & Details

Plasma Cutting Machine (Cut 60)

Tough construction
Durable standards
Low maintenance cost
Precise designs

Features

Adopts rational optimized design and arrange, high inverter frequency, high duty cycle, economy and energy saving.
Subminiature volume, lightweight, easy to carry, is especially suitable for moving job outdoor.
Compared with flame cutter, the air plasma arc cutter use cheaper compressed air as cutting gas supply and has the advantages of low cost and high speed etc.
Compared with traditional cutter, has the advantages of high success rate for arc initiation, high arc voltage, concentrated heat, powerful cutting ability, high cutting speed, narrow kerf, smooth cut face, less deformation.
Can cut metal plate along curve line in different thickness, cutting current digital display, cutting current adjust steplessl, accurate and read directly.
Built in over heat, over current, over voltage and low voltage protection circuit, operating, safely.

Technical Specifications

Parameter Model	APH-Cut-60
Input voltage (v)	AC380 V ±15%
Frequency (HZ)	50/60
Rated input current (A)	12
No-load voltage (V)	295
Output current Range	20-60
Rated Outpur voltage (V)	104
Duty Cycle (%)	60
No-load loss (W)	60
Efficiency (%)	85
Power Factor	0.93
Insulation Grade	F
Housing Protection Grade	IP21
Arcing Way	Contact
Recommended Air Presuure	01/15/2013
Net Weight (kg)	19
Dimension (mm)	480 x 204 x 303

View Complete Details

Ask Latest Price & Details

Plasma Cutting Machine (Cut 100)

Low maintenance cost
Precise designs
Tough construction
Durable standards

Features

Adopts rational optimized design and arrange, high inverter frequency, high duty cycle, economy and energy saving.
Subminiature volume, lightweight, easy to carry, is especially suitable for moving job outdoor.
Compared with flame cutter, the air plasma arc cutter use cheaper compressed air as cutting gas supply and has the advantages of low cost and high speed etc.
Compared with traditional cutter, has the advantages of high success rate for arc initiation, high arc voltage, concentrated heat, powerful cutting ability, high cutting speed, narrow kerf, smooth cut face, less deformation.
Can cut metal plate along curve line in different thickness, cutting current digital display, cutting current adjust steplessl, accurate and read directly.
Built in over heat, over current, over voltage and low voltage protection circuit, operating, safely.

Technical Specifications

Parameter Model	APH-Cut-100
Input voltage (v)	AC380 V ±15%
Frequency (HZ)	50/60
Rated input current (A)	23.1
No-load voltage (V)	268
Output current Range	20-100
Rated Outpur voltage (V)	120
Duty Cycle (%)	60
No-load loss (W)	80
Efficiency (%)	85
Power Factor	0.93
Insulation Grade	F
Housing Protection Grade	IP21
Arcing Way	Transfer
Recommended Air Presuure	01/25/2013
Net Weight (kg)	39
Dimension (mm)	560 x 370 x 350

View Complete Details

Ask Latest Price & Details

Plasma Cutting Machine (Cut 160)

Low maintenance cost
Precise designs
Tough construction
Durable standards

Features

Adopts rational optimized design and arrange, high inverter frequency, high duty cycle, economy and energy saving.
Subminiature volume, lightweight, easy to carry, is especially suitable for moving job outdoor.
Compared with flame cutter, the air plasma arc cutter use cheaper compressed air as cutting gas supply and has the advantages of low cost and high speed etc.
Compared with traditional cutter, has the advantages of high success rate for arc initiation, high arc voltage, concentrated heat, powerful cutting ability, high cutting speed, narrow kerf, smooth cut face, less deformation.
Can cut metal plate along curve line in different thickness, cutting current digital display, cutting current adjust steplessl, accurate and read directly.
Built in over heat, over current, over voltage and low voltage protection circuit, operating, safely.

Technical Specifications

Parameter Model	APH - Cut - 160
Input voltage (v)	AC 380 V ±15%
Frequency (HZ)	50/60
Rated input current (A)	44.3
No-load voltage (V)	320
Output current Range	20-160
Rated Outpur voltage (V)	144
Duty Cycle (%)	60
No-load loss (W)	100
Efficiency (%)	85
Power Factor	0.93
Insulation Grade	F
Housing Protection Grade	IP21
Arcing Way	Transfer
Recommended Air Presuure	01/01/1940
Net Weight (kg)	60
Dimension (mm)	670 x 337 x 510

View Complete Details

Ask Latest Price & Details

Tell Us What are you looking for? Will call you back

Contact Us

Ganesh Suvarna (Air Plasma House)
208 New Diamond Industrial Est.Near Virwani Industrial Est. Goregaon E ., Mumbai, Maharashtra
Share us via
Call 08068051372 Ext. 223
Found Something Wrong with this Listing? Report Here.