Our Products
Applications |
|
Features |
|
Standard Accessories |
|
Model | SC - OR - 220 | SC - OR - 440 |
Capacity (Ltrs.) | 220 | 440 |
Sludge Capacity (Ltrs.) | 50 | 50 |
Excess swarf basket (Ltrs.) | 12 | 12 |
Vacuum producer | Turbine blower | |
Vacuum (mm WG) | 3000 | 3000 |
Air displacement (cu.,tr/hr.) | 400 | 400 |
Vacuum Motor | 3Hp / 2800 rpm / 3ph / 415V / 50 Hz | |
Delivery pump flow rate (lpm) | 60 | 60 |
Delivery pump Motor | 350 W / 200 V / 1 ph. / 50 Hz. | |
Weight (Kgs.) | 180 | 210 |
Dimensions (L x W x H inches) | 76 x 32 x 56 | 84 x 37 x 62 |
FUMEX range of Fume Extraction Equipments & Systems are ideal for Continuous Heavy duty Fume Extraction applications namely :
| |||
Designed & Engineered specifically to ENSURE HEALTHY WORKING ATMOSPHERE, System offers not only important cost savings, but also create safer and healthier working environment.
|
Model | CB 600 | CB 1200 | TB 200 | TB 400 |
Air Flow (cfm) | 600 | 1200 | 200 | 400 |
Vacuum (mm wg) | 200 | 240 | 1900 | 3000 |
Motor (HP) | 1.5 | 3.0 | 2.0 | 3.0 |
Power supply (V) | 220 / 415 | 415 | 220 / 415 | 415 |
Suction Hose dia (mm ) | 140 | 2 x 140 | 50 | 2 x 50 |
AJANTHA range of Centrifugal Blowers with high efficiency, low noise, long life are available in single inlet, single width, construction and double Impeller double width construction. We can offer any direction of rotation and discharge as per customers choice. These blower combine high negative pressure with air flow volume, ensuring stable characteristic curve of the system resulting in consistently powerful extraction. Some of the benefits of these blowers are High performance, constant high air flow volume, Heavy duty construction, wide range of applications, low operating cost, simple and efficient and various sizes to choose from. Type of Impeller
AJANTHA SUMPVAC range of Sump Cleaner Cum Oil Recycler is dedicated for oil filtration cleaning recycling operations. Essentially they find application in Heavy / Light Engineering industries, Automobile / Automobile ancillary units. The System comprise the vacuum producer, delivery pump, filteration chamber and various cleaning accessories. Functions Collect coolant neat cutting oil from the sump tank, filter the oil/ coolant & return the clean oil/ coolant back in to the tank. Entire operation done in minutes say about 200ltr. Tank cleaned in 10 minutes as compared to manual operation which takes hours.
Technical Specifications
Model | SC-OR-220 | SC-OR-440 |
---|---|---|
Capacity | 220 Ltrs | 440Ltrs |
Sludge Capacity | 50/12 | 50/12 |
Vacuum | 2200mm wg | 3000mm wg |
Air Flow | 300 m3/hr | 425 m3/hr |
Motor | 2HP/2800 RPM/3ph | 3HP/2800 RPM/3ph |
AJANTHA range of Positive displacement blower is essentially constant speed machine that delivers relatively constant volume of air over a range of discharge pressures. In this blower air cannot be stored in a receiver nor throttled at the discharge but it must be used immediately. Standard blowers are supplied in vertical configuration, where one lobe is mounted on the other providing horizontal flow of air. However for special application horizontal configuration can also be offered on request. All blowers are normally supplied with standard accessories like suction / discharge silencer, base frame, filter, relief valve, pressure gauge, pulleys belts, belt guard & inter connecting pipe line. All blowers are tested as per B.S. 1571 part II for different parameters like capacity, pressure and B.H.P. The Lobes are dynamically balanced and all blowers are subjected to vibration test to ensure trouble free service. Positive displacement blowers have two timing gear driven "figure-8" shape lobed rotors that engage each other while rotating in opposite directions within a machined housing. Incoming air is trapped between lobes and discharged against relatively high pressure the rotors are separated at their closest point by small clearance space and never contact each other. A direct coupled motor or v-belt driven shaft drives the timing gears. v-belt drive preferred to permit speed changes, if required to meet system operating conditions. Capacity : 8-1760 cfm. Pressure : psig - 10 psig. Application
Features |
* Turbine / SCB design |
* Continuous operation |
* Low power consumption |
* Wet & Dry Vacuuming |
* Compact , portable, rugged. |
* Higher capacity on request / application requirement. |
Model | SCB-370 CS | SCB-600 CS |
Vacuum (mm wg) | 3100 | 2250 |
AIr Flow (m3/hr) | 450 | 600 |
Motor (HP) | 3 | 5 |
Tank cap. (Ltrs) | 60+80 | 60+80 |
Vacuum Producer | Side Channel Blower |
AJANTHA range of Turbine / Side Channel Blowers generate high negative pressure, which makes them ideal for applications requiring high vacuum performance such as Centralized Vacuum System. These powerful units are reasonably maintenance free with least wear and tear and operate very quietly. We offer different models depending upon the application needs. Principle of OperationThese blowers consist of a dynamically balanced impeller which revolves in a stator cum-compression chamber having very fine clearance between them.The impeller is fitted directly on a vertical shaft and is driven by flange mounted motor. Both the suction and pressure openings are located on the outer periphery of the stator to reduce the impedance to airflow thereby developing vacuum and pressure. ApplicationAeration in effluent treatment industrial vacuum cleaners plant furnace air supply agitation of chemicals pneumatic conveying electroplating chemicals, etc socks knitting machine air pollution monitoring fish farming and hatchery equipment. FeaturesNo lubrication is required since there is no friction and hence the air is absolutely oil free Practically nil maintenance cost. Extremely compact unit and can be mounted inside the equipment. silencer ensures low noise. Technical Specifications1 StageVacuum : 70 Mbar - 400 Mbar Capacity : 70 m3/hr - 1500 m3/hr Motor : 0.5 HP - 20.0 HP 2 Stage:Vacuum : 120 Mbar - 550 Mbar Capacity : 50 m3/hr - 700 m3/hr Motor : 0.5 HP - 20.0 HP