Write a Review
Our Products
Leading Manufacturer, Supplier & Retailer of Laser Cutting System and CNC Laser Cutting Machine.
| BALL RAIL SYSTEM | |
| Smooth & friction guided motion, high precision & high speed ball, long life & better load carrying capacity. | |
| BALL SCREW MECHANISM | |
| Precision movement imparted through ball screw mechanism. Supreme quality of ball screw to provide high accuracy and repeatability at high speed with low noise runner block. | |
| USER FRIENDLY SOFTWARE | |
| User-friendly software for laser power and pulse frequency, pulse duration along with position control. | |
| NESTING | |
| Nesting software to nest different types of jobs in single sheet and optimal use of raw material. Accommodation of different types of jobs from scrap material & common edge cutting. Complete material management through user-friendly software. | |
| HEIGHT SENSING UNIT | |
| Adjusting preset height automatically. It helps to cut little sloppy (non-flat or non-linear) surface of sheet. Non-contact & contact types of versions are available. | |
| STRUCTURAL DESIGN | |
| Structural design is such that it can withstand heavy loads. Vibration pads are used for sustaining the structural damping. | |
| REMOTE CONTROL | |
| Flexible machine controls from remote place with emergency stop facility, easy to understand or self-explanatory audio & video display machine. | |
| SHEET LOADING & CLAMPING | |
| Pneumatically actuated loader with ball on the top of it for easy sliding of the sheet. Pneumatically controlled firm clamping on the sheet. It can adjust the position of the clamp on the table. Safe loading and clamping for operator who is loading and un-loading the sheet. | |
| DETACHABLE OPTICS | |
| Replacements of mirror without any change in linked alignments. | |
| THERMAL OPTICS STABILITY | |
| Parallel water-cooling system with temperature control. It eliminates the thermal expansion of optics and increases peak power life. | |
| OPTICS BELLOWS | |
| Metallic bellows for protection of optics form contamination. | |
| CONTROL & DISPLAY | |
| SIEMENS or PC based SLT Ltd. controls available. |
| Drive Feed Method | Ball Screw | Rack&Pinion with Rall Guides | Linear Drive |
| Working Area/Sheet size | 3000mm x 1500mm | 4000mm x 2000 mm | 3000mm * 1500 mm |
| Z Axis Travel (max) | 200/150mm | 200/150mm | 200/150mm |
| workpiece Weight (Max.) |
450kgs | 1500kgs | 450kgs |
| Control Method | X-,Y-, and Z- axis controlled | X-,Y-, and Z- axis controlled | X-,Y-, and Z- axis controlled |
| (Three axis simultaneously controlled) | (Three axis simultaneously controlled) | (Three axis simultaneously controlled) | |
| Travel Method | X-Y : Optical travel | X-Y : Optical travel | Stationary table ,X,Y and Z- axis Movement for Cutting head |
| Positioning Speed(Max) | |||
| X-axis | 40m/min | 40m/min | 150 m/min |
| Y-axis | 40m/min | 40m/min | 150 m/min |
| Z-axis | 15m/min | 15m/min | 15m/min |
| Positioning Accuracy | +/- 0.1mm | +/- 0.1mm | +/- 0.1mm |
| Feed Rate | 10m/min | 10m/min | ----- |
| 10m/min | 10m/min | ----- | |
| Least Command Increment | 0.001mm | 0.001mm | ----- |
| Repeatability | 0.03mm | 0.03mm | 0.03mm |
| Acceleration | --- | --- | 2G for X&Y |
| CNC Controller | siemens sinumeric810D | siemens sinumeric840D | siemens sinumeric840D |
| CNC Control Method | Fully closed loop method | Fully closed loop method | Fully closed loop method |
| Control Function | X-,Y- and Z- axis Controlled | X-,Y- and Z- axis Controlled | X-,Y- and Z- axis Controlled |
| (simultaneously controlled) | (simultaneously controlled) | Laser Power Control | |
| Laser oscillator control | Laser oscillator control | ||
| Assist Gas Selector | Automatic selection | Automatic selection | Automatic selection |
| Electrical Requirement | AC, 3-Phases, 415 V, Complete system | AC, 3-Phases, 415 V, Complete system | 400v, 3 phase ,60Hz |
| Total Weight | 6500kgs | 14500 kgs | 11000 kgs |
| Input Methods | Manual data input with numeric keys | Manual data input with numeric keys | manual (MDI),Edit, RS-232 DNC, or 3 1/2* PC Compatible disk |
| 3.5" FD (built - in - type) | 3.5" FD (built - in - type) | CD/DVD disk,USB,Ethernet PCMCIA | |
| Operating Modes | Edit/Memory / MDI / Auto / Manual / teach | Edit/Memory / MDI / Auto / Manual / teach | Automatic and Manual |
| Display | 10.4 " COLOUR TFT DISPLAY | 10.4 " COLOUR TFT DISPLAY | 10.4 " COLOUR TFT DISPLAY |
| I/O Interface | PROFIBUS | PROFIBUS | ----- |
| DIaplayfunctions | Program directory | Program directory | Program Contents |
| Subroutine directory | Subroutine directory | Position Information | |
| Position & Feed information | Position & Feed information | Program Check | |
| User cycle directory | User cycle directory | Setting | |
| Alarm messages | Alarm messages | Parameters | |
| Tool diameter compensation | Tool diameter compensation | Beam Diameter | |
| (Offset) | (Offset) | Compensation | |
| Program Simulation | Program Simulation | Assist Gas Status | |
| Diagnosis (CNC self diagnostics) | Diagnosis (CNC self diagnostics) | Self Diagnostics | |
| Optional | Setting | Setting | Maintenance Reminders |
| Working Area | |||
| X- stroke | 1250/2500/300mm | 1250/2500/300mm | 1250/2500/300mm |
| Y- stroke | 1250/1200/1500mm | 1250/1200/1500mm | 1250/1200/1500mm |
Pankaj Gohil (Ajay Construction)
E-30, Electronic Estate,
G. I. D. C., Sector - 26,
Gandhinagar - 382 028
Gujarat., Makarpura, Vadodara
Share us via
