Other Products / Services #5476783

FEATURES

• Economically easy to install.
• Uniformity of water fidtribution very high even in windy conditions.
• Long Life Product made of high Quality engineering Plastic.
• Designed to ensure no damage to crop.

SPECIFICATION

• Arm, Body, Nozzles & Bearing of Derlin Materialfor Long Life.
• Trajectory Angle 23 degree.
• Lockable Design of nozzles for cleaning the sprinker.
• Stainless Steel Pin & Spring.

APPLICATION

Agriculture, Horticulture, Golf course, Wheat & Vegetables etc. Odeal for most solid set Portable application.

Drip n Drip Layflat pipe is a multipurpose industrial hose, manufactured under technical know-how from Industries Plastiche Lombarde, Italy. It is made by an advanced continuous manufacturing technique using a special formulation of PVC and high tensile polyester yarn. The process ensures total penetration of PVC onto the interstices of the polyester reinforcement and inseparable fusion of the inner and outer walls of PVC. This method of production allows maximum strength to be obtained while maintaining minimum wall thickness.

The hose thus produced has an exceptionally high hoop strength, at the same time allowing minimum longitudinal movement. It is a lightweight, water- proof flexible hose. It is resistant to weather, abrasion, process fluids and is rugged enough to take repeated daily rough handling. It does not corrode and is available in long lengths. It assumes a conventional round appearance under pressure and returns to its flat shape after use, for easy handling and storage. It does not need drying and can be rolled immediately after use. Drip n Dripflat is tough and will give many years of useful service

If the land area falls between 1 to 5 Acre you are recommended to go for small Rain gun Sprinkler System. You have to decide permanent or temporary system erection according to the crop pattern and your convenience. Raingun are only suitable for small and medium area. Uniform sprinkling, more area coverage than sprinkler system is convenience for this is size.

Drip N Drip PVC Pipes and Casing Pipes can be manufactured to any customer specified International standard (such as DIN, ISO, ASTM, BS, BIS and others) or any customized specifications. Right from very small diameter pipes to up to 250 mm diameter high pressure pipes can be supplied within short lead times

APPLICATIONSThere is virtually no limit to the varied uses of PVC Pipe. For your guidance we have listed below some typical examples of the many uses of Drip N DripPVC Pipe.

Water Mains & Potable Water Services Cold Water Plumbing Services Fire Ring Mains Sewage Main-Pumped & Gravity Feed Drainage Installations-Domestic & Industrial Factory Supply Lines Slurry Lines Effluent lines Corrosive Fluid Pipe Lines- Dyehouses, Chrome & Zinc Plating Plant, etc. Chemical Plant Installations Non-Explosive Dry Materials Handlings- Sand, Cement, Rock Salt Plastics Compounds. Pulverized Fuel Ash (DFA) Lines Brinelines- Tanning Plant, Ice Rinks Livestock whey Feed Pipes Paper Mill Installation-Alum & Pulp Carrying Brewery Pipeline Installation Coal Washing Plant Power Station Screening Plant Pipelines. Power Station Chlorination Plant Fume Extraction Ducts Chilled Waterlines for Refrigeration and Air conditioning Plant Salt water Pipes for small boat engines Cooling and Ballast Tanks Water Aeration Plant Emergency Repairs to damaged pipe lines in all materials Horticulture and greenhouse Irrigation System Irrigation for golf courses and sports grounds Down Pipes for large rain water systems & Farm Buildings, Foot ball stands, etc. Storm Water Culverts Surface Water Drainage Sewage Farm Stand-Pipes and filter bed rotor arms Domestic Appliances, Toys and Games Ducting for power and communication cables for crossing rivers. Estuaries, Roads, Rallies , Bridges, etc Threading through Existing unserviceable water mains and Ducts. Trench less pipe laying-Mole Ploughing Irrigation Farm and range irrigation-system and sprinkler system.

Drip n Drip brand valves to be used in the drip irrigation system is mainly made up from poly propylene having a ball type checking. It is mainly available in each sizes vise 20mm, 25mm, 32mm, 40mm, 63mm, 75mm, 90mm, 110mm.

The 3500 Series Rotor is an easy to use short to mid-range 1/2 gear-drive rotor, offering value and convenience for residential applications. Utilizing a simple flat-bladed screwdriver, the 3500s arc adjustment is quick and easy.

This versatile rotor offers an attachable nozzle tree with six superior performing Rain Curtain nozzles and the convenience of reversing full and part circle operation (up to 360 degrees) in one unit. Plus, a nozzle removal feature and easily removable filter screen makes maintenance a breeze.

All of this and an affordable price makes the Drip n Drip 3500 Series one rotor that is easy to use, easy to buy and tough to beat!

FEATURES

• Top-adjust arc adjustment requiring only a flat-blade screwdriver.
• True 4 (10 cm) pop-up (measured from center of nozzle).
• 40- 360 Arc Part-Circle arc rotation and reversing Full-Circle rotation in one.
• Attachable nozzle tree of six Rain Curtain nozzles.
• Radius adjustment screw allows up to 35% radius reduction without changing nozzles.
• Quick Check Arc/Fast Forward.
• Dual action, positive stop wiper seal protects internals from debris and assures positive pop-up and retraction.
• Self-adjusting stator does not require replacement when changing nozzles.
• Water-lubricated gear-drive design for durable, reliable operation.
• Easily removable filter screen.
• Nozzle removal feature.
• Arc setting factory preset at 180 for installation convenience.
• Optional Seal-A-Matic (SAM) check valve holds up to 7 feet (2, 1m) of elevation change, to prevent puddling and erosion caused by low head drainage.
• Precipitation rate: .37 to .72 inches per hour (9 to 18 mm/h)
• Radius: 15 to 35 feet (4, 6 to 10, 7 m)
• Radius may be reduced up to 35% with Radius Reduction Screw
• Pressure: 25-55 psi (1, 7 to 3, 8 Bars)
• Flow Rate: .54 to 4.6 gpm (, 12 to 1, 04 m 3/h)
• 1/2 NPT female bottom threaded inlet
• Reversing Full-and Part-circle adjustment 40 360
• Pop Up height shrub: 4 (10, 2 cm)
• Overall body height shrub: 6.6 (16, 8 cm)
• Exposed surface diameter: 1.16 (2, 9 cm)

Agarden hose, hosepipeis aflexible tubeused to conveywater. There are a number of common attachments available for the end of the hose, such assprayersandsprinklers(which are used to concentrate water at one point or spread it over a large area). Hoses are usually attached to a hose spigot ortap.

APPLICATIONS

Water Mains & Potable Water Services Cold Water Plumbing Services Fire Ring Mains Sewage Main-Pumped & Gravity Feed Drainage Installations-Domestic & Industrial Factory Supply Lines Slurry Lines Effluent lines Corrosive Fluid Pipe Lines- Dyehouses, Chrome & Zinc Plating Plant, etc. Chemical Plant Installations Non-Explosive Dry Materials Handlings- Sand, Cement, Rock Salt Plastics Compounds. Pulverized Fuel Ash (DFA) Lines Brinelines- Tanning Plant, Ice Rinks Livestock whey Feed Pipes Paper Mill Installation-Alum & Pulp Carrying Brewery Pipeline Installation Coal Washing Plant Power Station Screening Plant Pipelines. Power Station Chlorination Plant Fume Extraction Ducts Chilled Waterlines for Refrigeration and Air conditioning Plant Salt water Pipes for small boat engines Cooling and Ballast Tanks Water Aeration Plant Emergency Repairs to damaged pipe lines in all materials Horticulture and greenhouse Irrigation System Irrigation for golf courses and sports grounds Down Pipes for large rain water systems & Farm Buildings, Foot ball stands, etc. Storm Water Culverts Surface Water Drainage Sewage Farm Stand-Pipes and filter bed rotor arms Domestic Appliances, Toys and Games Ducting for power and communication cables for crossing rivers. Estuaries, Roads, Rallies , Bridges, etc Threading through Existing unserviceable water mains and Ducts. Trench less pipe laying-Mole Ploughing Irrigation Farm and range irrigation-system and sprinkler system.

For plants that need extra water, insert 1.0 and 2.0 GPH spot watering emmiters, branching from main 1/2 tubing lines to reach trees, potted plants or other targeted areas.

• Ideal for extending irrigation to widely spaced plants or trees.
• Increases flow to selected plants as needed anywhere in your landscaping.

A fogger is used to create a fog, especially for killing insects. They are filled with insecticides and sprayed. A large number of people depend on foggers to drive away pests, owing to its lost cost and high effectiveness.They find application in a large number of fields, including aeroponics. Our company is one of the distinguished manufacturers and suppliers of foggers. Our products guarantee reliability and quality and comes in economical prices.

Drip n Drip Sprinkler Nozzle are made up from brass/ Gun-Mattel material having taflon vicars & linked spring element.

VERSATILE APPLICATION

The major & end use of Sprinkler Nozzle are:

• For artificial rain fall in various crop.
• For aesthetic purpose in loan.
• For water saving purpose
• For Dust suppression.
• Outstanding resistance to conventional minerals.
• Excellent flows just like rainfall.
• Rust resistance body
• Fall circle model is available
• Having a trajectory angle of 27

Now-a-days by using drip irrigation system, farmers ate producing variery of crops not only of grapes, banana, sugarcane, pomegranate but also of flowers, For this, traditional fertilizer methods are used. In same Places Fertilizer soluble in water are used. For this purpose they use fertilizers tanks or H.T.P. Pumps. Elsewhere fertilizers are supplied by foot pumps also or pumps of 0.5 HP are used

The base for water soluble fertilizers is acid. Hence, all the above equipments become useless by corrossion. For this purpose, a new production calledDripn Drip Injectorhas been introduced. Using this injector, we can supply uniform quantity of fertilizers in the entire field. Hence, it is very essential to installDrip n Drip Injector

Lift Irrigation, Drip Irrigation, Pesticide Dispersal, Cable Ducting, Sewerage/Drainage etc. in urban and rural areas. They are also useful in Chemical/Processing Industries, Telecommunications, Vegetable Oil, Fruit Juices, Dairies and other liquid & semi-liquid conveyance & flow