Pune, Maharashtra, India
GST : 27AACCA0712C1ZH
Verified
Add Review
Our Products
We are offering interface unit with memory. It can be connected to ferrolab & model 570 t to store the information like ce, c, si, tp, tl, ts, tf, date, time, heat no.(for ferrolab) & date, time, heat no., temperature (for 570 t). After selecting full print mode, it can store 800 readings for ferrolab and 2000 readings for model 570 t. It has a centronic output and it is connectable to a parallel printer.
It is a Microcontroller based unit, having 6 digit, 5 inch ultra bright seven segment blocks for Temperature Indication. 8 digit, 2.3 inch ultra britht dot matrix for Date, Time and Run Number
MODEL 407 is a microcontroller based, most economical and accuratetemperature measuring instrument for ferrous and non ferrous industries.This pyrometer is specially designed to measure temperature of almost anymaterial, in any state, when used with a suitable probe.
FEATURES
It is a wall Mountable Auxiliary Lamp and Hooter System. It can be used for givinga remote indication of sequence of signals (Green for Ready, Yellow for Measure, Red for Complete) and Hooter to indicate end of measuring cycle.
It is a microcontroller based, wall mountable unit which is used for giving audio and visual indication for Within Range Temperature Reading (Green Lamp) and Out of Range Temperature Reading (Red Lamp + Hooter). It has facility to enter Upper Limit Reading and Lower Limit Reading of Temperature.
It can be connected to FERROLAB & MODEL 570 T to store the information like CE, C, Si, TP, TL, TS, TF, Date, Time and Heat No.
After selecting full print mode, it can store 400 readings for FERROLAB and 800 readings for Model 570 T. It has a centronic output and it is connectable to a parallel printer.
SPECTRACHARGE is a magnified display to show the addition of charge on shop floor. Spectraview will display the report from the spectrometer readings and Spectracharge will display what addition is required if desired value is less or greater than expected.
SPECTRAVIEW is a magnified large shop-floor display unit suitable for foundries and steel plants for display of spectrometer analysis results directly to concerned persons on the shop floor viz. Melting Managers, Supervisors, Melting Operators, etc.
Precitime Model Dual Display T-442 is a microcontroller based, dual sided model for accurate down time for user setting process time and hooter time. It can be used in any field. The model has three lamps on both sides; green for start of process time, yellow for hooter time and red for process time. Both process time and hooter time can be set by using the keyboard which has five different push buttons for setting, selection and adjusting time.
This sampler is suitable for every steel plant for taking sample in Arc Furnace, Ladle and Tundish. These are used for process analysis of molten metal for instantaneous sampling techniques and reinforces quality control. We manufacture various types of Immersion Samplers.
It is a Microprocessor based unit, specially designed to fulfill the requirement of remote and magnified view (Digit height 4 inches) of temperature readingmeasured by model 570 T & Ferrolab, connected through current loop interface.The maximum distance of Large Display Unit can be 300 meters from 570T/Ferrolab. This enables to position this large display unit at any place on theshopfloor. The temperature measured at any point on this display unit is visiblefrom anywhere in the shopfloor. More than one Large Display Unit can beconnected to Model 570 T and Ferrolab.
Large Display Unit is available in 2 types, 6 digits for Ferrolab and 4 digits forModel 570 T. Large Display Unit for Ferrolab has a rolling display and displays CE, C, Si, TP, TL, TS, TF
