Other Products / Services #326555

UPVC Pipes are used in all conceivable applications ranging from Agriculture to sanitation, bore well to electrical ducts because of low cost, low pressure features they became favorites of all farmers, builders & Industrialist.

Ajay use special THICK & THIN technique to make pipe thicker in the threading section. This technique provides much higher strength to the pipe at lower cost. FORMULATIONAjay Column pipes are made with unique designed formulation to enhance internal hydrostatic pressure &vertical tensile load on the pipe due to column and pump weight.

We furnish high precision Rain Gun Sprinkler that is remarkable for its superior performance. Our Dust Control Rain Gun Sprinkler is made from the best quality raw materials accessible in the market. These rain gun sprinklers are used for irrigation in a larger field minimum time and pressure as compared to conventional sprinklers. Additionally, we are one of the renowned Portable Rain Gun Sprinkler Manufacturers in India.

Advantages :

• Extremely Efficient Portable System
• Lightweight, superior finish and sturdy, easy to shift.
• Uniform sprinkling with condition to calibrate droplet size and rainfall rate, suitable to all soils and crops.
• One Ajay Rain Gun Sprinkler substitutes various conventional sprinklers saving considerably in labour and time taken for irrigation.
• Quick fit accessories for connecting to PVC or G.I. or HDPE main lines.
• Early sowing & better germination of seedling through optimum moisture condition of soil which is possible by Rain Gun Sprinkler System.
• Liquid fertilizer can be applied quickly over large areas. It saves on fertilizer quantity, foliar application hence results in good yield.
• Simple maintenance with prompt After Sales Service.
• Free Survey, Design and Installation.

We are earnestly engaged in offering the complete range of Hand Pump Tool Kits in the industry. Our Water Hand Pump Tool Kits includes button die, thread tap, pipe thread, pipe wrench, jaw spanner, lubricating oil, multipurpose grease in packed container, Nylon rope, and so on. These hand pump kits are especially designed for the repairing and maintenance of all kinds hand pumps. Apart from that, we are recognized as one of the Deepwell Hand Pump Tools Suppliers in India.

Technical Description of Standard Tool Kit

• Button die in high speed steel with die holder, M12 x 1.75- 1 no.
• Thread tap in high speed steel with handle, M12 x 1.75- 1 set
• Pipe thread die with die stock 32mm- 1 no.
• Pipe wrench 600mm as per IS:4003/Part I (1978)-2 nos.
• Pipe wrench 450mm as per IS:4003/Part I (1978)- 1 no
• Double ended open jaw spanner 16x18mm in CV steel- 2 nos.
• Screw driver 250mm x 8mm dia-1 no.
• Adjustable spanner 250mm-1 no.
• Ball pein hammer with handle (1kg approx.)-1 no.
• Hack saw frame with six spare blades 300mm- 1 no.
• Flat file with handle, rough, 250mm 1 no.
• Wire brush, fine wire 1 no.
• Lubricating oil in plastic can with nozzled outlet -200 ml
• Multipurpose grease in packed container- 2 kg15.Nylon rope, 3mm -75meter
• Spirit level 300mm 1 no
• Tool box with locking arrangement to accommodate above items

We are offering india mark iii deepwell (volm 50) with upvc riser pipe etc. Static water level depth 20 - 50 mtrdischarge minimum 14 ltr. / 40 stroke completed in 1 minutestroke length 175 mm 4borewell casing size 100 nb to 150 nbrising main size 50 nb upvc with 3 piece upvc moulded couplercylinder - upvc (50 nb)connecting rod mild steel or stainless steelabove ground structure (pump stand, head, handle, water tank etc.- mild steel

We present superior quality Venturi Assembly in the marketplace. Our Vacuum Cup Venturi Assembly is made from the best raw materials accessible in the market. These Venturi Assemblies are used for the proper irrigation of the field. In addition to this, we are one of the prime Nozzle Venturi Assembly Manufacturers in India.

The ends are fitted with specially designed heavy duty moulded PVC malefemale threaded fittings.With our continuous R&D efforts we have developed uPVC Riser Main pipes with Stainless Steel Coupling. The stainless steel coupling with male thread insert is fitted and crimped at both end of the pipes. This stainless steel coupling is coupled with the help of a female threaded socket.

We manufacture and supply highly advanced Screen Filtration System. Our Low-Cost Automatic Screen Filtration System is made from reinforced Polypropylene giving extra durability. It is corrosion resistant and easy to install as well. The system has a wide range of flow rate. Besides, we are one of the foremost Mechanical Screen Filtration System Exporters from India.

Features

• Nominal Operating Pressure - 2 Kg / cm2
• Testing Pressure - 10 Kg / cm2
• Size of Aperture - 103 Microns
• Closing Torque - 50Nm
• Type of connections - Threaded
• Maximum Allowable Pressure drop - 0.35 Kg / cm2
• Hot Dipped Galvanized with Flanged Ends

SCREEN FILTER (PLASTIC) HT-125T 2-1/2" T Type Screen Filter Specifications

• Available Connection- 2-1/2"(BSPT)
• Closing system- Steel Clamp
• Max. Pressure- 6 kg/cm2
• Mesh Size-120 mesh / 130 micron
• Range of Flow Rate- 27 - 35 m3 / hr
• Nominal Flow Rate- 30 m3 / hr
• Clean Pressure Drop- Max. 0.18 kg / cm2 at nominal flow
• Filtration Surface Area- 492 cm2
• Filtering Cartridge- SS Screen (120mesh)
• Cartridge Diameter- 104 mm
• Cartridge length- 286 mm
• Weight- 3.550 kg

Features

• Available in 2-1/2" BSP male thread connection
• Body made of reinforced Polypropylene for durability
• Corrosion resistant
• Easy to install
• Low maintenance
• Wide range of flow rate
• Three way valve assembly for easy monitoring of inlet and outlet pressure

SCREEN FILTER (PLASTIC) HT-126T 3" Y Type Screen Filter Specifications

• Available Connection- 3" (BSPT)
• Closing system- Steel Clamp
• Max. Pressure- 8 kg/cm2
• Mesh Size- 120 mesh 130 micron
• Range of Flow Rate- 45 - 51 m3 / hr
• Nominal Flow Rate- 50 m3 / hr
• Clean Pressure Drop- Max. 0.25 kg / cm2 at nominal flow
• Filtration Surface Area- 2286 cm2
• Filtering Cartridge- SS Screen (120mesh)
• Cartridge Diameter- 118 mm
• Cartridge length- 496 mm
• Weight- 6.100 kg

Features

• Available in 3" BSP male thread connection
• Body made of reinforced Polypropylene for durability
• Corrosion resistant
• Easy to install
• Low maintenance
• Wide range of flow rate
• Three way valve assembly for easy monitoring of inlet and outlet pressure

SCREEN FILTER (PLASTIC) HT-125T 2-1/2" T Type Screen Filter

Features

• Available in 2-1/2" BSP male thread connection
• Body made of reinforced Polypropylene for durability
• Corrosion resistant
• Easy to install
• Low maintenance
• Wide range of flow rate
• Three way valve assembly for easy monitoring of inlet and outlet pressure

SCREEN FILTER (PLASTIC) HT-126T 3" Y Type Screen Filter Specifications

• Available Connection- 3" (BSPT)
• Closing system- Steel Clamp
• Max. Pressure- 8 kg/cm2
• Mesh Size- 120 mesh 130 micron
• Range of Flow Rate- 45 - 51 m3 / hr
• Nominal Flow Rate- 50 m3 / hr
• Clean Pressure Drop- Max. 0.25 kg / cm2 at nominal flow
• Filtration Surface Area- 2286 cm2
• Filtering Cartridge- SS Screen (120mesh)
• Cartridge Diameter- 118 mm
• Cartridge length- 496 mm
• Weight- 6.100 kg

Features

• Available in 3" BSP male thread connection
• Body made of reinforced Polypropylene for durability
• Corrosion resistant
• Easy to install
• Low maintenance
• Wide range of flow rate
• Three way valve assembly for easy monitoring of inlet and outlet pressure
</ul

We furnish the finest quality Continuous Slot Well Screen in the national as well as international market. The Fiberglass Continuous Slot Well Screen that we offer to the clients is remarkable for its high quality and performance. These Continuous Slot Well Screens are made from excellent base materials making them endurable and long lasting in nature. They are properly tested on different parameters before supplied in the market. In addition to this, we are counted as one of the chief Wire-Wrapped Continuous-Slot Well Screen Exporters in India.

Advantages

• Lightweight easy to handle.
• A maximum open area of 50 percents is offered facilitating high flow capacity and low inlet resistance resulting in extended well life.
• Screens are provided with threaded female ends and connected by means of separate nipple (adaptor) retaining length and internal and external smoothness.
• The hydraulic advantages afforded by screen make it also suitable for low yield water bearing strata.
• Advanced solid constructions suitable for installation to depths of 400 meters.
• Completely corrosion free eliminating electrolysis reaction.

K50A, 60A, 70A, 80A SERIES IMPACT DRIVE ROTARY POP-UP SPRINKLERS Full or Part CircleThese long range rotary sprinklers are recommended for golf courses, parks, athletic fields and other large turf areas. Heavy duty construction ensures long life and trouble free service. Features

• Impact Drive actuated by nozzle stream and a recoil torsion spring.
• Anti-Backsplash Arm eliminates wasted water. Redirects sidesplash into the main stream. Standard on a all part circle models PK50A and PK60A full circle.
• The PK50AF and PK60AF utilize a single, high performance brass nozzle. The PK 70AF and PK80AF incorporate dual brass nozzling utilizing the secondary (small) nozzle to actuate the impact torsion drive, thereby assuring uniformity of large area coverage.
• Part Circle Models have a single, high performance brass nozzle.
• Trip Collars on all part circle models adjust the arc of coverage from 5°-355° with detents every 7-1/2° to retain arc selected.
• Screwdriver Adjustment of Stainless Steel Arm Torsion Spring Through cover to "fine-tune" sprinkler while in operation or "off" positions.
• All Internal Components are easilty removable from above ground as an integral assembly.
• Diffuser Pins for distance control and stream break up are standard on all part circle sprinklers. Full circles have specially designed nozzling to ensure close-in coverage.
• Free Turning Coves swivel under surface loads, thereby preventing sprinkler damage.
• Large Water Channels reduce pressure loss, improving sprinkler efficiency and performance.
• Check Valve prevents unsightly puddling caused by lateral line drainage at low heads. The check valve also minimizes damage to pipe, fitting and sprinklers caused by high velocity surging in empty lines. Valve opens against 15 ft/hd. (4.5 m/hd.) of water.

Construction

• New, "extra strength, " high impact engineering grade plastic housing. Molded-in brass inserts provide positive threading for stainless steel retainer bolts.
• O-Ring Seal under retainer gland makes field reassembly easier and provides sealing action superior to a gasket.
• Covers Are Die Cast Aluminum with green epoxy finish
• Internal Sprinkler Assembly is fabricated brass, stainless steel, cast bronze and non-corrosive plastics.
• Each Sprinkler is Factory Tested and calibrated at its rated intermediate operating range.

Options

• Rubber Cover - Green (XR58A) or Black (XR58BL), full molded rubber cover with rubber housing ring; allows sprinklers to be set flush to grade. Cover has center plug for access to cover screws and arm spring adjustment.
• Vandal Resistant Cover Screws (XV58) Special Tool required for removal.

PK50AF (FULL CIRCLE) Maximum Recommended Operating Pressure As Noted

NOZZLEOPERATING PRESSURE PSIFLOW GPMDIAMETER COVER (ft.)

B99/64	40506070	3.64.04.24.6	82828484
*B1011/64	4050607080	4.75.25.76.16.5	8486889092
B1111/64	4050607080	5.86.47.07.47.8	8688909294

PK50AP (PART CIRCLE) Maximum Recommended Operating Pressure As Noted

NOZZLEOPERATING PRESSURE PSIFLOW GPMDIAMETER COVER (ft.)

B99/64	40506070	3.64.04.24.6	41414242
*B105/32	4050607080	4.75.25.76.16.5	4243444546
B1111/64	4050607080	5.86.47.07.47.8	4344454647

PK60AF (FULL CIRCLE) Maximum Recommended Operating Pressure As Noted

NOZZLEOPERATING PRESSURE PSIFLOW GPMDIAMETER COVER (ft.)

B123/16	40506070	6.77.58.39.19.8	8789919395
B1313/64	4050607080	7.28.29.110.010.8	8890929496
*B147/32	4050607080	8.59.610.611.611.9	8991939597
B1515/64	4050607080	9.610.511.612.713.3	9092949698

PK60AP (PART CIRCLE) Maximum Recommended Operating Pressure As Noted

NOZZLEOPERATING PRESSURE PSIFLOW GPMDIAMETER COVER (ft.)

B123/16	4050607080	6.77.58.39.19.8	4445464748
B1313/64	4050607080	7.18.19.110.111.1	4546474849
*B147/32	4050607080	8.69.610.611.612.6	4647484950
B1515/64	4050607080	9.810.811.812.813.8	4748495051

We bring forth the finest quality Spray Popup in the market. The Fixed Spray Popup offered by us is Available in 90°, 180°, 270°, 360° fixed spray patterns low as well as high discharge rate. It is also designed for providing nozzle flow adjustment. Further, we are reckoned as one of the distinguished Lawn Care Spray Popup Manufacturers in India.

Features Precise Discharge Spray Nozzles :Female threaded precise spray nozzles made of UV stabilized High Impact ABS Engineering Plastics. Available in 90°, 180°, 270°, 360° fixed spray patterns having low as well as high discharge rates. Also available variable arc Nozzles. Designed to provide nozzle flow adjustment. Also available pop up fogger and bubbler. Piston Stroke :Available in 2â and 4â, 6â and 12â (with side in let) pop up stroke lengths. Bottom Inlet :½â BSP Bottom Inlet is standard in all models. Wiper Seal :Specially designed wiper seal made of good quality synthetic rubber. Protects piston from and debris. Holds retract spring in place. Stainless Steel Arc Adjustment Screw :Provide with stainless steel arc adjusting screw for ease or arc adjustment. Cap :Buttress threaded cap are provided for firm holding of cap of the body against high water pressures. Large threads prevent cross threading during fitment. Single Piece Filter Screen :Filter screen made of good quality Engineering Plastics having large filtration area of prevent any debris from entering the nozzle so as to give good quality and reliable spray pattern. Retract Spring :Corrosion resistant Stainless Steel retract spring insures a positive retraction of the piston during close down of water supply. Ratchet Adjustment :Ratchet adjustment provided for easy alignment of the spray pattern in the field. Made of good quality wear resistant plastic materials to ensure a long operational life. Anti Drain Valve :All models are provided with anti drain valve to eliminate lowhead drainage & puddling.

HDPE Pipes are manufactured from High Density Poly Ethylene Polymers i.e. PE-63, PE 80, PE 100. HDPE Pipes are available in sizes 20mm to 500mm outer diameter and in pressure rating ranging from PN2.5toPN16.0

Our organization is open to accept payment for an order through online or offline mediums. We provide patrons with the payment period, details, and other terms & conditions in the invoice. We use superior-grade packaging as barrier protection for our products against dust, moisture, mechanical damages and logistical jostling. Our products packaging is premium.

We provide high end Gear Pop-Up Sprinkler that is used for efficient irrigation. We are one of the choicest Gear Drive Sprinkler Manufacturers in India. Our Gear Pop-Up Sprinklers have "Point and Shoot" arc adjustment without any tool. The smooth impeller gear drive of the sprinkler gives uniform water in all direction. Furthermore, we are also counted among the chief Gear Drive Pop-Up Sprinkler Suppliers.

Dimensions : 3/4 IPS Height : 7-5/8" ( 19.4 cm) Pop - up Height : 4" (10.2 cm) Features :

• Gear Drive : An impeller actuates the gear train, providing a smooth, steady, rate of rotation necessary for highly uniform watering. A sealed, lubricant packed drive housing provides long-life performance.
• Quiet Operation
• Field Changeable Nozzles : A set of nine nozzles is provided with each sprinkler. User can change in seconds to match precipitation rates and adapt performance to site conditions.
• Impeller Flow Regulator : The "automatic adjusting stator" correctly matches the volume of flow required at the impeller with the nozzle selected.
• Nozzle Lift Socket : Socket is provided in top of cover for lifting flow tube. Lifting tools are included in earch carton of sprinklers.
• Ready CheckTM Valve : 2 - Position check valve in the bottom of the removeable strainer is standard. Ready CheckTM is easily reversed in the field to the "check" position. Valve opens against f2 ft./hd. of water.
• Large Flow Tube : Streamlined flow tube design permits lower pressure loss through sprinkler, allows for optimum nozzle performance.
• Strainer : Large area screen protects nozzle from debris with minimum restriction in flow.
• Range Adjustment : Stainless steel screw retains nozzle and diffuses stream for optimum range control.
• Part-Circle. Arc Adjust Ring : Exclusive arc adjusting on nozzle flow tube permits quick adjustment of arc size from 40 degree to 360 degree. Sprinkler may be adjusted while water is on or off.
• Arc Dwell : A momentary "dwell" at each end of the part-circle arc provides full coverage along borders.
• Safety Clutch : "Slip" clutch protects gear train from damage if vandal should turn flow tube during operation. Clutch can also be used for arc relocation during installation.
• Full Wiper Seal : The pressure activated wiper seal on the Turbo 3 prevents debris from entering the sprinkler. This feature allows the sprinkler to be set at grade. Wiper seal and a strong, stainless steel spring assure positive head retraction.
• VRS Rubber Cover : "Vandal-resistant safety" cover is standard on all springlers. "Pos-i-lock"TM retainer prevents cover removal.
• Threaded Cover : Screw-on cover permtis easy access to all internal parts without removing sprinkler from point of connection.

Construction :High-strength, non-corrosive plastics and metals are used throughout this sprinkler to ensure long-life performance int he commercial or residential enrironment. Options :

• Non-potabel Alert Cover (add "N" suffix to part number)
• Vandal cover Lock (XVT3). Cover is designed to accept optional vandal screw to lock cover to body.

Accessories :Nozzle / Arc Tool (T3ST) : Nozzle changing and arc adjustment are both quick and easy with the T3St.