We offer the best product range of Charge Discharge Ampere Hour Meter IM2507, Three Doser Ampere Hour Meter, Current Limit Ampere Hour Meter IM2512, Battery Monittoring Ampere Hour Meter IM2505 and Six Digit Ampere Hour Meter IM2506.
IM2507 is a charge discharge type Ampere Hour meter with two independent 4 digit displays for separate charge and discharge counting. One display counts the charge through the circuit, while other counts the discharge.Application areas are; battery life cycle testing, battery monitoring applications.
IM2509 model ampere hour meter comes with three control relay outputs to facilitate addition of three chemicals. It is the modified virsion of the IM2503 model which offers two control relay outputs to control a addition of two chemicals.The other features of IM2502C model are retained in this model.
IM2512 is a 4 digit Ampere hour meter with a current limit relay. It has all the features of standard IM2501 C model, in addition a current set point. Typically, while in the charging process, when a battery is sufficiently charged, the current flow drops to a lower level. At this juncture, the battery must be disconnected from the source of power.
IM2505 is a charge discharge type Ampere Hour Meter which is best suited for tracking monitoring battery AH in circuit. These are used in applications related to submarine and telecom or in sectors where battery back ups are used; since battery charge is to be monitored to switch on off charger. It helps load to avoid excessive charging as well as deep discharge. When battery is being charged, the AH count will increment. When batterystarts discharging, AH count will decrement. When AH reaches the lower set point, relay will operate. This can be used to either generate warning alarm or switch off discharge and or start charger. Relay will remain operated till battery is charged to its full level.
IM2506 model which comes with 6 digit display as compared to IM2501 Ampere Hour Meter which can show AH count upto 4 digits. This model can be used with any kind of load circuit as the shunt value can be programmed by the user as per the application. The instrument is provided with one relay output to alert the user when the sufficient charge has been delivered using alarm, tower lamp, etc. It can also be used to directly cut off the rectifier.
These DC Watt Meter is a valuable tool for any modeler who flies electric powered models. It is cure to failures of motors, speed controllers, and batteries by providing the information to user needed to operate these items within a safe range. It will also allow safe experimentation with different batteries and propellers to maximize performance of that perticular model. We are manufacturers of efficient DC watt meter that are widely used to measure DC power across the load. This product is highly acknowledged and displays accurate reading. Available in various configurations it can further be customized as per the requirements given by the client. The output can be directly monitored to your existing PLC or SCADA systems
IM2510 AH Meter with Timer is ampere Hour meter with the provision of Timer to Switch the relay ONOFF after pre-defined time (count) irrespective of battery charge levels. Typical application of this can be battery charging or discharging applications where battery might not charged or discharged to a specified level within a certain time period. The process has to be stopped after either predefined time is lapsed or charge level is reached.
IM2514 is an advanced version of IM2501 ampere hour meter where user has thee modes to choose from ampere hour meter, ampere minute meter or as ampere second meter as per application necessity.It has one setpoint with a relay output to control external rectifier. All features of IM2501 are retained.
Ajinkyas 4 Digit Ampere Hour Meter with Totaliser provides a totaliser display along with ampere hour ampere minute count display. Most preffered for applications of Electroplating, where precise total charge decides the strength of the plating bath and addition of electrolyte, additive brightener in the bath to maintain the required strength of the electrolyte.In battery charging applications, totaliser will indicate the total charge drawn during charging process. It can also be used for discharging applications.